Home Accents Holiday TY505-1714-1 User manual

SKU # 1003 186 114
OMS THD SKU # 1003 135 926
Model # TY505-1714-1
Thank you!
We appreciate the trust and confidence you have placed in Home Accents
through the purchase of this 6ft Spirited Sparkle LED Lighted Unicorn. We
strive to continually create quality products designed to enhance your home.
Visit us online to see our full line of products available for your home
improvement needs. Thank you for choosing HomeAccents!
1-877-527-0313
HOMEACCENTSHOLIDAY.COM
ASSEMBLY INSTRUCTIONS
6ft Spirited Sparkle LED Lighted Unicorn
USEANDCAREGUIDE
PLANNING ASSEMBLY
Carefully remove all the parts from the box and place them on the ground. Many
parts are connected by the lighting string that runs throughout the item. Take special
care not to pull, cut or damage the lighting string. Read the entire manual prior to
assembly and identify all the parts included in the package against the parts list. It is
recommended to assemble parts of the product while laying flat on the ground
versus standing the item up to assemble the parts. If any parts are missing or
damaged do not attempt assembly but contact our customer service center.
*Assembly of this product may require more than one person.
Pre-Operation
CAUTION:Grasp the plug to insert or remove from the power source.
Do not unplug by pulling on cord.
CAUTION:The lighting string on this product is rated at 33.6 Watts (0.28
Amps). Do not overload. Do not connect to another lighting string, decorative outfit or
other electrical products. Before you use or re-use this product inspect it carefully.
Discard or return to place of purchase with purchase receipt if the product has cuts,
damage, frayed wire insulation on cords, cracks in the socket enclosures, loose
connections, exposed copper wire or other obvious damage.
CareandCleaning
a. Carefully remove the product from wherever it is placed. This helps to avoid any
undue strain or stress on the product connections and wires. If the product is placed
somewhere other than the ground it should be well secured and flat.
b. Carefully disassemble the unit taking caution not to cut any electrical wires.
c. Wipe the unit with a damp cloth and allow the unit to dry before storing.
d. Store the product neatly in a cool, dry location protected from sunlight.
Trouble Shooting
a. Ensure that the floor or surface that the item sits on is flat and level
b. Be sure to plug the item correctly to a wall outlet or a UL Listed Power Cord
c. Ensure all parts are assembled properly per the Instruction Manual
d. If the item does not light check for loose or broken bulbs and connections
e. Do not plug into other electrical items
f. If the item has multiple Light String Cords be sure to plug in all cords
g. Check for Broken or Burned Out Fuse In Plug
Guarantee
What is Covered
The product is intended for residential seasonal use for 90 days per year. This
product is covered by a 90 days limited guarantee due to defects in material and
workmanship. Return the product with purchase receipts to the location of purchase
for refund within 90 days of purchase.
What is Not Covered
This warranty does not cover commercial use, normal wear and tear, products not
used in accordance with directions provided on or with the product, burn out of bulbs
or LEDS, batteries, products that have been subjected to unauthorized repair and/or
modification and damage caused by shipping and improper handling, alterations,
misuse, in store display models or accidents. Questions, problems, missing parts?
Before returning to the store, call Home Accents Holiday Customer Service 8 a.m.-6
p.m., EST, Monday-Friday
Diagram of Parts
Parts List
Locater Name Qty.
A Horn 1
B Ear 2
C Head/Neck 1
D Body 1
E Front Leg 2
F Hind Leg 2
G Mane 1
H Wing 2
I Tail 1
J Base Stand 1
Hardware List
Locater Name Qty.
K Spare Bulb 5
L Spare Fuse 2
M Plastic Tie 20
N Bolt & Wingnut 3
O Ground Stake 8
P Anchoring String 4
Download the free BILT app on any mobile
device and access easy 3D interactive
instructions to assemble this product.
Please go to Homedepot.com and search for
SKU number or model number listed on the
top left corner of this page. INSTALLATION
VIDEO (located next to product image).
AB
D
C
E
F
G
H
I
J
K
L
M
N
O
P

A
SSEMBLY
1 Assembling the Hind Legs to the Body
Note: Place all the parts of Body and Hind Legs flat on the ground floor.
Insert the connecting rods at the top of the Hind Legs (F) into the
matching connecting holes on the underside of the rear portion of the
Body (D) and secure them together at the connecting loops with Bolt &
Wingnuts (N).
2 Assembling the Tail to the Body
Insert the connecting rods on the Tail (I) into the matching connecting
holes at the rear of the Body (D) and fasten together at the connecting
loops with Plastic Ties (M).
3 Assembling the Base Stand to the Hind Legs
Insert the connecting rods on the bottom of Hind Legs (F) {hoof} into
the connecting holes on the Base Stand (J). Secure the Tail (I) and
Base Stand (J) together at the connecting loop with Bolt & Wingnuts
(N).
4 Assembling the Head/Neck and Ears
Stand the assembled Body upright on the Base Stand. Insert the connecting
rods on each Ear (B) into the connecting holes on the top of the Head (C).
Insert the connecting rods on the bottom of the Head (C) into the connecting
holes at the top of Body (D) then fasten them together at the connecting
loops with Plastic Ties (M).
5 Assembling the Front Legs to the Body
Insert the connecting rods on the top of the Front Legs (E) into the
matching connecting holes on the front of the Body (D) and fasten
together at the connecting loops with Plastic Ties (M).
6 Assembling the Horn and Mane to the Head/Neck
Insert the connecting rods on the Horn & Mane (A,G) into the matching
connecting holes of the Head/Neck (C).
7 Assembling the Wings
Insert the connecting rods on the two Wings (H) into the matching
connecting holes on the back of the Body (D) and fasten together
at the connecting loops with Plastic Ties (M).
8 Assembling theAnchoring Strings and Ground Stakes
Hook the plastic clipped end of each ofAnchoring String (P) onto the
connecting loop by the neck on the Body (D).Attach the looped end of the
Anchoring String to the hook on the end of the Ground Stakes (O) then pull
the Anchoring Strings out and evenly away from the Unicorn then secure
the Ground Stakes into the ground. With the remaining Ground Stakes (O)
place the hooked end over the metal frame of the Base Stand at four
corners then into the ground firmly.
N
D F M
D
I
N
J
F
I
M
E
D
G
A
C
M
H
D P
O
D
D
B
M
C
M