Home Decorators Collection WSFP59HD-14 User manual

THANK YOU
We appreciate the trust and confidence you have placed in Home Decorators Collection through the purchase of this fireplace console.
We strive to continually create quality products designed to enhance your home. Visit us online to see our full line of products
available for your home improvement needs. Thank you for choosing Home Decorators Collection!
Model # WSFP59HD-14
# WSFP59ECHD-15
# WSFP59ECHD-16
OMSID # 207000440
OMSID # 207000474
OMSID # 207000442
ASSEMBLY INSTRUCTIONS
Bellevue Park 59 in. Media Console with Infrared Electric Fireplace
Questions, problems, missing parts? Before returning to the store,
call Home Decorators Collection Customer Service
8 a.m. - 7 p.m., EST, Monday-Friday
9 a.m. - 6 p.m., EST, Saturday
1-800-986-3460
HOMEDEPOT.COM/HOMEDECORATORS

2
Table of Contents
Table of Contents................................................................... 2
Safety Information................................................................. 2
Warranty................................................................................ 2
Pre-Assembly ........................................................................ 2
Planning Assembly........................................................... 2
Tools required .................................................................. 2
Hardware Included ...........................................................3
Package Contents.............................................................4
Assembly ...............................................................................5
Care and Maintenance.........................................................16
Safety Information
Please read and understand these instructions before
assembling and using this console. Save these instructions
for future reference.
MAXIMUM RECOMMENDED WEIGHT LOADS
WARNING: This unit is not intended for use with CRT TVs.
Use only with flat panel TVs and audio/video equipment
meeting recommended size and weight limits. Never use
with larger/heavier than recommended flat panel TVs or
equipment. To avoid instability, place flat panel TV in the
center of the unit; the base of the television must be able
to rest on the supporting surface of the unit without
over-hanging the edges. Improperly positioned flat panel
TVs, or flat panel TVs or other equipment that exceed
recommended size and weight limits could fall off or break
the unit, causing possible serious injury.
Warranty
We are confident that you will be delighted with this purchase. Should this product be defective in workmanship or materials, or
fail under normal use, we will repair or replace it for a period of up to one (1) year from date of purchase.
This warranty gives you specific rights and you may also have other rights which vary from state to state.
Contact the Customer Service Team at 1-800-986-3460 or visit www.HomeDepot.com/homedecorators.
Pre-Assembly
PLANNING ASSEMBLY
Compare all parts with the Hardware Included and Package Contents list. If any part appears missing or damaged, do not
assemble this product and contact the Customer Service Team at 1-800-986-3460.
TOOLS REQUIRED
Phillips
screwdriver
(not provided)
Maximum load 22.6 kg / 50 lb
Place TV behind
t
he sto
pp
er
Fit
s
up
t
o most 177.
8
cm / 70 in.
f
lat panel TV
s
Maximum load 61.2 kg / 135 lb
Maximum load 6.8 kg / 15 lb

3 HOMEDEPOT.COM/HOMEDECORATORS
Please contact 1-800-986-3460 for further assistance.
Pre-Assembly (continued)
HARDWARE INCLUDED
NOTE: Hardware not shown to actual size.
Part Description Quantity Part Description Quantity
AA Wood dowel 44 + 2 extra KK Medium wood screw 4 + 1 extra
BB Cam lock 43 + 2 extra L
L
Cam lock cover 8 + 1 extra
CC Cam bolt 43 + 2 extra MM Shelf pin 8 + 1 extra
DD Pan head screw 4+ 1 extra NN Knob 4
EE Magnetic catch 2 OO Knob bolt 4
FF
L
-shaped metal brace 2 PP Straight metal plate 2
GG Corner connector 4 QQ Acrylic stopper 1
HH Short wood screw 12 + 1 extra RR Glue 1
II Washer head screw 42 + 2 extra SS Touch-up pen
(not included for WSFP59ECHD-16) 1
JJ Long wood screw 4 + 1 extra TT Tipping restraint hardware
k
it 2
L
L
AA BB CC DD EE FF GG HH II
JJ K
K
MM NN OO PP QQ
TT SS
RR

4
Pre-Assembly (continued)
PACKAGE CONTENTS
Part Description Quantity Part Description Quantity
A Top panel 1 N Right upper side panel 1
B Center shel
f
1 O Left upper partition panel 1
C Bottom panel 1 P Right upper partition panel 1
D Bottom back stretcher 1 Q Adjustable shel
f
2
E Bottom
f
ront molding 1 R Upper back panel 1
F Left lower side panel 1 S Middle crossbar 1
G Right lower side panel 1 T Middle stile 2
H Left lower partition panel 1 U Drawer 2
I Right lower partition panel 1 V Right lower back panel 1
J Left door 1 Fireplace insert 1
K Right door 1 Remote control with battery 1
L
Left lower back panel 1
M Left upper side panel 1
A
B
C
D
E
FGHIJKL
MOPN Q
STU
R
V

5 HOMEDEPOT.COM/HOMEDECORATORS
Please contact 1-800-986-3460 for further assistance.
Assembly
1 Screwing the cam bolts
NOTE: Do not fully tighten all bolts until you finish assembling all parts. Once assembled, go back and fully tighten all bolts.
This will make the assembly easier.
□ Unpack the unit and confirm that you have all the hardware and required parts. Assemble the unit on a carpeted floor
or the empty carton to avoid any scratches.
□ Securely screw the cam bolts (CC) into the designated plastic bushings on the top panel (A) and the bottom panel (C)
using a Phillips screwdriver.
2 Screwing the cam bolts
□ Securely screw the cam bolts (CC) into the designated plastic bushings on the lower side panels (F and G) and the
lower partition panels (H and I) using a Phillips screwdriver.
CC
C
A
H
I
G
F
CC

6
Assembly (continued)
3
Assembling the cam bolts and magnetic catches
□ Securely screw the cam bolts (CC) into the designated plastic bushings on the center shelf (B) on both sides.
□ Align two magnetic catches (EE) to the pilot holes on the center shelf (B) with the magnetic plates facing the finished
edge. Then attach the magnetic catches (EE) in place using two pan head screws (DD) per catch.
4
Attaching the middle stiles
NOTE: Refer to the dowel and cam lock assembling guide drawings in this step for further clarification on how to properly glue in
the wooden dowels and install cam locks. Apply this method whenever instructed to install wood dowels and cam locks .
□ Fasten one middle stile (T) to the left lower partition panel (H) using two wood dowels (AA) and two cam locks (BB).
□ Repeat the same procedure to combine the other middle stile (T) and right lower partition panel (I) together.
B
B
EE
DD
CC
H
I
TT
GLUE
XX
FINAL
12 43

7 HOMEDEPOT.COM/HOMEDECORATORS
Please contact 1-800-986-3460 for further assistance.
Assembly (continued)
5
Installing the bottom back stretcher
□ Align and attach the bottom back stretcher (D) to the bottom panel (C) with
f
our wood dowels (AA) and four cam locks
(BB).
6
Attaching the middle crossbar
□ A
t
tach
t
he middle crossbar (S) between the lower partition panels (H and I) by engaging
t
wo cam locks (BB), as
shown.
H
I
S
C
D

8
Assembly (continued)
7
Attaching the bottom panel assembly
□ Glue
f
our wood dowels (AA) into the inner holes of the lower partition panels (H and I) and attach them to the
bottom panel (C) with four long wood screws (JJ).
8
Installing the lower side panels
□ Glue six wood dowels (AA) into the inner holes of the bottom panel (C) and bottom back stretcher (D) at both ends.
□ Align the large holes on both side panels (F and G) with the inserted wood dowels (AA) and press them together. Attach
the side panels (F and G) in place by engaging six cam locks (AA), as shown.
JJ
H
I
AA
C
JJ
AA
BB
BB
C
G
F
AA
AA
D

9 HOMEDEPOT.COM/HOMEDECORATORS
Please contact 1-800-986-3460 for further assistance.
Assembly (continued)
9
Installing the center shelf
□ Glue ten wood dowels (AA) into the top inner holes of the previous assembly.
□ Ask for assistance to position the center shelf (B) onto the inserted wood dowels (AA). Attach the center
shelf (B) in place by engaging eleven cam locks (BB).
10
Attaching the upper side panels and partition panels
□ Glue eight dowels (AA) into the inner holes of the upper side panels (M and N) and partition panels (O and P) and
attach them to the center shelf (B) by engaging eight cam locks (AA).
B
M
N
O
P
F
G
H
I
S
B
AA

10
Assembly (continued)
11
Attaching the top panel
□ Glue eight wood dowels (AA) into
t
he
t
op inner holes on
t
he upper side panels (M and N) and partition panels (O and
P). Position the top panel (A) onto the inserted wood dowels (AA) and fasten it in place with eight cam locks (BB).
12
Attaching the bottom front molding
□ Align and attach the bottom front molding (E) to the lower side panels (F and G) with
f
our medium wood screws (KK).
□ With the pilot holes as a guide, fasten four corner connectors (GG) at the bottom joints between the bottom panel
(C) and the bottom front molding (E) using two washer head screws (II) per corner connector. Tighten all screws
with a Phillips screwdriver.
F
G
II
KK
II
GG
C
E
M
N
O
P
A

11 HOMEDEPOT.COM/HOMEDECORATORS
Please contact 1-800-986-3460 for further assistance.
Assembly (continued)
13
Installing the metal plates
□ Flip the assembled unit around at its front edges. Fasten the middle crossbar (S) to the middle stiles (T) by attaching
two metal plates (PP) at the joints, using two short wood screws (HH) in each, as shown.
14
Attaching the back panels
□ Pick up the upper back panel (R) and align the pre-drilled holes against the upper long edge with the pilot holes on
the back stretcher of the top panel (A). Attach the back panel (R) in place using the provided washer head screws (II).
□ Align and attach the left and right lower back panels (L and V) to the lower side panels and partition panels (F, G, H and
I) with the provided washer head screws (II), using the pilot holes as a guide.
R
V
L
UP II
II
H
I
S
PP
HH

12
Assembly (continued)
15 Attaching the adjustable shelves and cam lock
covers
□ Stand the unit upright.
□ Insert four shelf pins (MM) into the desired holes inside each side compartment. Tilt and rest the adjustable shelves
(Q) onto the shelf pins (MM) and secure in place with the short wood screws (HH).
□ Plug the cam lock covers (LL) onto the visible cam locks to conceal the cams.
16 Installing the doors
□ Attach two knobs (NN) to the front side of left door (J) with the knob bolts (OO).
□ Pick up the left door (J) and attach the extended hinge arms to the hinge bases installed on the left side panel (F).
Loosen the bolt on the back of the hinge base for an easy fit. Align and insert the “U” slot on the hinge arm under the
bolt head on the back of the hinge base. Make sure that both door hinges engage and function properly. Tighten the
bolt on the hinge base to lock the hinges in place.
□ Repeat the same procedure to attach the right door (K) at the opposite side.
□ Open and close the doors to make sure they are aligned and shut correctly. If necessary, adjust the screws for a good
fit. Refer to the hinge sticker on the door for adjustment.
LL
HH
MM
MM
Q
Q
1
OO
NN
F
G
K
J

13 HOMEDEPOT.COM/HOMEDECORATORS
Please contact 1-800-986-3460 for further assistance.
Assembly (continued)
17 Installing the drawers
□ To insert the drawers (U) into the frame, extend the ball bearing slide tracks on the upper side panels (M and N) and
partition panels (O and P) all the way forward (including ball bearing cart). Align the slide runners on the drawers (U)
with the slide tracks, and then push the drawer carefully inside until it stops.
NOTE: If a drawer does not go in smoothly, please take it out and repeat the step. If you need to remove the drawer,
please pull the drawer all the way out, then simultaneously push the plastic release lever of the ball bearing slides up
on one side and down on the other side. Then pull it completely out.
18 Installing the fireplace insert
□ Lift the fireplace insert carefully into the back of the assembled mantel and center it in the opening. DO NOT drag the
insert across the bottom panel (C) as it may scratch the unit.
U
U

14
Assembly (continued)
19
Attaching the L-shaped metal braces
□ Using the pilot holes as a guide, align and attach two
L
-shaped metal braces (FF) to the bottom panel (C) by
screwing one washer head screw (II) in each.
20
Installing the acrylic stopper
□ Remove the paper backing of the acrylic stopper (QQ). Then properly align the acrylic stopper into the cut-out on the
acrylic stopper template on the front of the top panel (A). Press down on the acrylic stopper to help adhesion.
□ At the back of the top panel (A), carefully pull out the thumb tacks to remove the acrylic stopper template.
NOTE: You must install the acrylic TV stopper to prevent TV from tipping when placing your flat panel television
on the top panel.
II
FF

15 HOMEDEPOT.COM/HOMEDECORATORS
Please contact 1-800-986-3460 for further assistance.
Assembly (continued)
21
Installing the tipping restraint hardware
WARNING: Young children can be seriously injured by tipping furniture. You must install the tipping restraint hardware with
the unit to prevent the unit from tipping, causing any accidents or damage. The tipping restraints are intended only as a
deterrent, they are not a substitute for proper adult supervision. The tipping restraints are not earthquake restraints. If you wish
to add the extra security of earthquake restraints, they must be purchased and installed separately.
□ With assistance, position the assembled fireplace at the desired location against a wall. In case of uneven floor, floor
levelers are provided at the bottom of the mantel. If necessary, adjust the floor levelers by hand to correct tilting
and/or level the doors, until the unit is level.
□ Follow the instructions printed on the plastic bag containing the tipping hardware to attach the tip-over restraint to
the unit and the wall.
□ Connect the fireplace to the power transformer. Follow the operating manual for the electric fireplace insert to control
your fireplace.

A Touch-up Pen has been provided to repair any small nicks or scratches that may occur during assembly or shipping.
To clean and care for your furniture:
□ Use a soft, clean cloth that will not scratch the surface when dusting.
□ Use of furniture polishes is not necessary. Should you choose to use polishes, test first in an inconspicuous area.
□ Using solvents of any kind on your furniture may damage the finish.
□ Never use water to clean your furniture as it may cause damage to the finish.
□ Always use coasters under beverage glasses and flowerpots.
□ Liquid spills should be removed immediately. Using a soft clean cloth, blot the spill gently. Avoid rubbing.
□ Always use protective pads under hot dishes and plates. Heat can cause chemical changes that may create spotting
within the furniture finish.
□ Stains or marks from crayons or ink markers will be difficult to remove.
□ In the event that your furniture is stained or otherwise damaged during use, we recommend that you call a professional
to repair your furniture.
□ Check bolts/screws periodically and tighten them if necessary.
CARING FOR WOOD FURNITURE
It is best to keep your furniture in a climate-controlled environment. Extreme temperature and humidity changes can cause
fading, warping, shrinking and splitting of wood. It is advised to keep furniture away from direct sunlight as sun may damage
the finish.
Proper care and cleaning at home will extend the life of your purchase. Following these important and helpful tips will enhance
your furniture as it ages.
CLEANING THE FIREPLACE TRIM
Clean the metal trim using a soft cloth, slightly dampened with citrus oil based product and buff with a clean soft cloth. DO NOT
use brass polish or household cleaners as these products will damage the metal trim. Citrus oil based products can be obtained
at supermarkets or hardware stores.
Questions, problems, missing parts? Before returning to the store,
call Home Decorators Collection Customer Service
8 a.m. - 7 p.m., EST, Monday-Friday
9 a.m. - 6 p.m., EST, Saturday
1-800-986-3460
HOMEDEPOT.COM/HOMEDECORATORS
Retain this manual for future use.
Care and Maintenance