Home Styles 5523-682 User manual

Part List
IMPORTANT
Carefully remove all the parts from the carton and
place them individually on a soft cloth to prevent
scratches or other damage.
Carefully and strictly follow these assembly instructions
to ensure a completed product as designed.
Do not use power tools above 8 volts to assemble.
Tool(s) required for assembly: LevelPhillips screwdriver,
D.
Side Panel
2 Pcs.
L.
Side Panel
1 Pc.
E.
Side Panel
1 Pc.
M.
Side Panel
1 Pc.
N.
Side Panel
1 Pc.
F.
Back Panel
1 Pc.
O.
Back Panel
1 Pc.
I.
Door
1 Pc.
P.
Door
1 Pc.
J.
Door
1 Pc.
Q.
Door
1 Pc.
C.
Side Panel
1 Pc.
K.
Side Panel
1 Pc.
Carton 5523-681 is also needed for assembly.
5523-682
Corner Cabinet
styles Customer Service: www.homestylesfurniture.com,home
[email protected], 888-680-7460

Assembly Instructions 2/7
IMPORTANT
Use a soft cloth between these parts and the floor.
Do not use power tools above 8 volts to assemble.
Do not tighten all the bolts until each part is properly assembled.
The unit must be level to work properly. Use the included adjustable levelers to level.
STEP 1
Insert 34 pcs. of into pre-drilled holes in Top (A),01
Side Panels (C), (E), (K), (M), Fixed Shelf (B) and Base (G), then tighten.
(See Figure 1)
Attach 4 pcs. of to Top (A) and Fixed Shelf (B) with 8 pcs. of into pre-drilled holes.03 04
(See Figure 2)
Figure 1 Figure 2
01
04
03
G
B
C
K
A
M
E

Assembly Instructions 3/7
STEP 3
Attach side unit (C, D) and
side unit (E, D) from Step 2
to Base (G) with 6 pcs. of .02
Attach Back Panel (F) to unit
with 2 pcs. of .02
STEP 2
Attach Side Panel (C) to
Side Panel (D) with 2 pcs. of . (See Figure 3)02
Attach Side Panel (E) to Side Panel (D) with 2 pcs. of .02
Figure 3
D
D
E
C
02
F
DD
G
EC
02

Assembly Instructions 4/7
STEP 5
Insert and 6 pcs. of8 pcs. of 01 02
into pre-drilled holes in unit, then tighten.
STEP 4
Insert 8 pcs. of into side panels05
at desired level. (See Figure 4)
Place Shelves (H) into position.
Attach Doors (I) and (J) to unit
by sliding door hinges
into side panel hinges.
(See Figure 5)
Attach 2 pcs. of to Doors (I)07
and (J) with 2 pcs. of .06
(See Figure 6)
Attach Fixed Shelf (B) to unit
with 2 pcs. of .02
Figure 4 Figure 5 Figure 6
I
J
B
H
H
02
07
06
05
01
02

Assembly Instructions 5/7
STEP 6
Attach Side Panel (K) to Side Panel (L)
with 3 pcs. of .02
Attach Side Panel (M) to Side Panel (N)
with 3 pcs. of .02
STEP 7
Attach side unit (K, L) and side unit (M, N)
from Step 6 to unit from Step 5 with 6 pcs. of .02
Attach Back Panel (O) to unit
with 2 pcs. of .02
L
N
M
K
02
M
K
L
O
N
02

Assembly Instructions 6/7
Figure 7
STEP 8
Insert into side panels8 pcs. of 05
at desired level.
Place Shelves (H) into position.
Attach Doors (P) and (Q) to
unit by sliding door hinges
into side panel hinges.
Attach to Doors (P) and (Q)2 pcs. of 07
with .2 pcs. of 06
Attach Top (A) to unit
with .2 pcs. of 02
STEP 9
Insert into pre-drilled holes6 pcs. of 02
of unit, then tighten.
Level unit by adjusting the adjustable
levelers on bottom of unit.
(See Figure 7)
Note: Unit must be level to work properly.
H
H
A
P
Q
02
07
06
05
02

Assembly Instructions 7/7
STEP 10
Place unit at desired location.
Drill a 3/8” hole in wall in-line with
pre-drilled hole at top of unit.
Move unit.
Insert Anchor into the wall hole
and attach Bracket with Wall Screw.
Attach Bracket at pre-drilled hole
at top of unit with Wood Screw.
Move unit back into place.
Slide Tipover Restraint through
Bracket on wall and Bracket on unit.
(See Figure 8)
Put tie end of Tipover Restraint into lock
end of Tipover Restraint and pull until tight.
Figure 8
IMPORTANT
To help reduce the risk of the unit tipping over, the Tipover Restraint must be installed following these instructions exactly.
Hardware List
Anchor
2 pcs. (+1 extra)
Bracket
4 pcs. (+1 extra)
Tipover Restraint
2 pcs. (+1 extra)
M3.5x40
Wall Screw
2 pcs. (+1 extra)
M3.5x16
Wood Screw
2 pcs. (+1 extra)
Bracket
on wall
Anchor in wall
3/8” wall hole
Tie end
Lock end
Bracket at
top of unit
Tipover
Restraint
Wood Screw
Wall Screw Pre-drilled hole
at top of unit
Drill 3/8” hole in wall
Top of unit

5523-681
Corner Cabinet
IMPORTANT
For assembly see instructions in carton 5523-682.
Carefully remove all the parts from the carton and
place them individually on a soft cloth to prevent
scratches or other damage.
Carefully and strictly follow these assembly instructions
to ensure a completed product as designed.
Do not use power tools above 8 volts to assemble.
Part List
A.
Top
1 Pc.
B.
Fixed Shelf
1 Pc.
G.
Base
1 Pc.
H.
Shelf
4 Pcs.
Hardware List
styles Customer Service: www.homestylesfurniture.com,home
[email protected], 888-680-7460
05
Adjustable Pin
16 pcs. (+1 extra)
03
Magnet
4 pcs.
07
Knob
4 pcs.
Machine Screw
4 pcs.
06
04
Wood Screw
8 pcs. (+1 extra)
01
Cam Lock Screw
42 pcs. (+2 extra)
02
Cam Lock
42 pcs. (+6 extra)

NEVER
use glass cleaners on
finished furniture. Ammonia
chemically attacks the finish.
allow liquids to remain on furniture.
Absorption causes parts to warp
and split and finishes to delaminate.
NEVER
CARE INSTRUCTIONS
Do not use rubber
based placemats.
PREVENT
DISCOLORING
Do not use commercial
waxes and polishes.
PREVENT
YELLOWING
Do not place hot
objects on surface.
PREVENT
FINISH DAMAGE
Do not write
directly on surface.
PREVENT
MARKING
Do not use power tools
above 8 volts to assemble.
PREVENT
CRACKING
Do not place
in direct sunlight.
PREVENT
FADING
with a soft cloth moistened
in lukewarm soap and water.
Buff with a dry clean cloth.
CLEAN
homestyles will provide replacements free of charge for missing or damaged parts within 30 days of purchase.
Digital images of the defective parts may be required. If the product was not purchased from an authorized retailer,
homestyles is under no obligation to provide replacement parts. Parts are not available for fully assembled items nor
are parts available for sale. Replacements for missing or damaged parts may be requested via contact info below.
styles Customer Service: www.homestylesfurniture.com,home
[email protected], 888-680-7460