Home Styles Nantucket Hutch User manual

Home Styles ConsumerAssistance: www.homestyles-furniture.com,
[email protected], 888-680-7460, 877-831-0319
Tools required for assembly : Phillips screwdriver Tools recommended for assembly : Level
IMPORTANT NOTE
Carefully remove all the parts from the carton and put
them individually on a soft cloth to prevent scratches
or other damages occuring to the wood parts.
We have taken great care in the design of this
product and request that you carefully and strictly
follow our assembly instructions to ensure a
completed product as it was designed.
88 5022 307
Nantucket
Hutch
Hardware List
Part List
Adjustable Pin
12 pcs. (+1 extra)
Key Wrench
1 pc.
Small
Key Wrench
1 pc.
Pull Handle
2 pcs.
Cam Lock
16 pcs. (+1 extra)
Machine Screw
2 pcs.
Cam Lock Screw
16 pcs. (+1 extra) Steel Plate
Connector
2 pcs.
Wood Screw
20 pcs. (+2 extra)
A.
Top
1 pc.
D.
Side Panel
1 pc.
B.
Shelf
1 pc.
C.
Side Panel
1 pc.
E.
Middle Panel
1 pc.
F.
Middle Panel
1 pc.
G.
Front Rail
1 pc.
I.
Shelf
2 pcs.
H.
Shelf
1 pc.
J.
Back Rail
1 pc.
K.
Door
1 pc.
L.
Door
1 pc.
M.
Back Post
2 pcs.
N.
Back Panel
1 pc. P.
Back Panel
3 pcs.
O.
Back Rail
1 pc.
B.
Sh
el
f
G.
ro
nt R
a
il
pc.
1 pc.
J
.
B
ac
k R
a
il
1pc.
O
.
B
ac
k R
a
il
A.
To
p
1 pc.

P
P
O
O
STEP 2
Attach Back Rail (O) to Side Panel (D)
using Cam Lock. (see Figure 2)
Slide Back Panel (P) into grooves in
Side Panel (D) and Back Rail (O).
Attach Back Posts (M) and (N) to Back
Rail (O), then slide Back Panel (P) into
position and attach Back Rail (J) to unit
with Cam Lock.
Cam Lock
IMPORTANT
* Do not tighten up all the screws until each part is properly assembled.
* You should keep Hex Wrench in a safe place as you may need to tighten up the Head Cap Bolts in the future.
* Use a soft cloth between these parts and the floor.
*After assembly, item must be level to work properly.
Assembly Instruction 2 / 4
STEP 1
Insert Cam Lock Screws into the pre-drilled holes
of Top (A), and Side Panel (C) and (D).
(see Figure 1)
A
A
C
C
D
D
Cam Lock Screw
Figure 1 Figure 2
Cam Lock Screw
Cam Lock
P
P
M
M
N
N
J
J
D
D
P
P

Assembly Instruction 3 / 4
STEP 4
Attach Front Rail (G) to unit using Cam Lock.
Attach Side Panel (C) to unit with Cam Locks.
E
E
Adjustable Pin
Cam Lock
F
F
B
B
K
K
C
C
STEP 5
Place Top (A) onto the unit with Cam Locks.
Insert Adjustable Pins into side panels at the
desired level.
Place Shelves (H) and (I) into position.
Attach Doors (K) and (L) to side panels by sliding
the door lift hinges into the side panel lift hinges.
(see Figure 3)
Assemble Knobs to Door (K) and (L) with
Machine Screws. (see Figure 4)
Figure 3 Figure 4
STEP 3
Attach Shelf (B) to unit using Cam Locks.
Attach Middle Panels (E) and (F) to unit.
Cam Lock
Cam Lock
G
G
H
H
I
I
A
A
L
L
I
I

STEP 6
Insert 12X Wood Screws from the back of the
unit. (see Figure 5)
Note: Please make sure unit is level before
tightening these screws.
STEP 7
Place the Hutch unit onto the Buffet unit.
Attach Steel Plate Connectors with Wood
Screws.
(see Figure 6)
Assembly Instruction 4 / 4
Figure 6
Steel Plate
Connector
Wood Screw
Wood Screw
Figure 5
Wood
S
crew
e
r
Figure
6