Home Styles 88 5527 10N User manual

Part List
K.
Back Panel
2 pcs.
I.
Base
1 pc.
IMPORTANT NOTE
Carefully remove all the parts from the carton and put
them individually on a soft cloth to prevent scratches
or other damages occuring to the wood parts.
We have taken great care in the design of this
product and request that you carefully and strictly
follow our assembly instructions to ensure a
completed product as it was designed.
A.
Top
1 pc.
Casual Attire For Today's Home
88 5527 10N
Entertainment Credenza
Homestead
Home Styles Consumer Assistance Line 888-680-7460 and 877-831-0319
[email protected]
Hardware List
H.
Front Rail
1 pc.
J.
Back Panel
1 pc.
T.
Plinth Support
1 pc.
U.
Plinth
1 pc.
Cam Lock
26 pcs.(+1 extra)
Cam Lock Screw
26 pcs.(+1 extra)
Adjustable Pin
20 pcs.(+1 extra)
Pull Handle
4 pcs.
Machine Screw
4 pcs.
Wood Screw
for Wood Block
4 pcs.(+1 extra)
Wood Screw
for Magnet
8 pcs.(+1 extra)
Magnet
4 pcs.
Wood Block
2 pcs.
Hex Wrench
1 pc.
Head Cap Bolt
3 pcs. (+1 extra)
Wood Screw
for Back Panel
12 pcs.(+1 extra)
B.
Side Panel
.1 pc
C.
Side Panel
1 pc.
D.
Middle Panel
.1 pc
E.
Middle Panel
.1 pc
F.
Fixed Shelf
1 pc.
L.
Shelf
1 pc.
M.
Shelf
4 pcs.
N.
Door
1 pc.
O.
Door
1 pc.
P.
Door
1 pc. Q.
Door
1 pc.
R.
Leg
4 pcs.
S.
Leg
1 pc.
G.
Back Panel
1 pc.
Tools required for assembly : Phillips screwdriver

STEP 2
STEP 1
Assembly Instructions 2/5
A
H
Cam Lock Screw
Wood Screw (long)
Cam Lock
Insert Cam Lock Screws into the pre-drilled holes of Top (A).
Attach Front Rail (H) onto Top (A) with Cam locks (see figure 2).
Wood Block
with Magnet
Attach 2X Magnets to the both Wood Blocks by using
Wood Screws (short) in the pre-drilled holes.
Attach 2X Wood Block with
Magnets to Front Rail (H) by
using Wood Screws (long) in the
pre-drilled holes (See figure 1).
(Figure 1) (Figure 2)
Wood Screw
(short)
Wood Block
IMPORTANT
You should keep Hex Wrench in a safe place as you may need to
tighten up the Head Cap Bolts in the future.

Assembly Instructions 3/5
STEP 3
STEP 4
B
E
D
I
C
Insert Cam Lock Screws into
the pre-drilled holes of
Base (I).
Side Panel (B) and (C),
Middle Panel (D) and (E),
T
U
Cam Lock Screw
Head Cap Bolt
Head Cap Bolt
Cam Lock Screw
(Figure 3)
Hex Wrench
D
E
Cam Lock Screw
Cam Lock
G
F
STEP 5
Attach 2X Magnets to Fixed Shelf (F) by using
Wood Screws (short) in the pre-drilled holes.
Attach Fixed Shelf (F) to Middle Panel (D) with Cam Locks,
to the unit with Cam Locks.
then slide Back Panel (G)
into position.
Attach Middle Panel (E)
Magnet
Attach Support Plinth (T) to Plinth (U)
using Head Cap Bolts. (See figure 3)
Insert Cam Lock Screws into the pre-drilled holes
of Support Plinth (T).

STEP 6
Assembly Instructions 4/5
Cam Lock
Attach Base (I) to the unit with Cam Locks.
Attach Side Panel (B) and (C) to the unit with Cam Locks,
then attach the plinth unit to the unit with Cam Locks.
Tighten up Legs (R) and (S) in the pre-drilled holes of unit as shown.
I
BS
R
R
R
R
C
A
Adjustable Pin
Cam Lock
STEP 7
Slide Back Panels
(J) and (K) into place.
Place Top (A) onto
the unit, using
Cam Locks.
Insert Adjustable Pins into
side panels and middle panels at the desired level. (See figure 4)
Place Shelves (L) and (M) into position.
L
J
K
M
M
M
M
K
(Figure 4)

O
P
Q
Attach Doors (N), (O), (P) and (Q) by sliding
the door lift hinges into the side panels lift hinges. (See figure 5)
Assemble Pull Handles to Doors with Machine Screws. (See figure 6)
STEP 8
STEP 9
Assembly Instructions 5/5
N
(Figure 6)
(Figure 5)
(Figure 7)
Insert 12X Wood Screws from the back of the unit,
tighten up all the Wood Screws. (See figure 7)
Note: Please make sure unit is level before tightening these screws.