Home Styles 5040-95 User manual

Tool(s) required for assembly: Phillips screwdriver
Hex Wrench
1 pc.
Small Hex Wrench
1 pc.
M6x35
Head Cap Bolt
16 pcs. (+1 extra)
M3.5x25
Wood Screw (long)
8 pcs. (+1 extra)
M4x16
Wood Screw
16 pcs. (+1 extra)
M4x20
Machine Screw
6 pcs.
Wood Plug
6 pcs. (+1 extra)
C.
Side Panel
1 pc.
Caster
2 Locking
2 Non-Locking
4 pcs.
5040 95-
Kitchen Cart
IMPORTANT
A.
Top
1 pc.
B.
Side Panel
1 pc.
D.
Back Rail
1 pc.
E.
Front Rail
1 pc.
F.
Base
1 pc.
G.
Back Rail
1 pc.
H.
Back
Upright
1 pc.
I.
Back Panel
2 pcs.
J.
Arm Handle
2 pcs.
K.
Arm
1 pc.
L.
Drawer
1 pc.
Refer to later page(s) of these
instructions for drawer assembly.
M.
Shelf
1 pc.
N.
Door
1 pc.
O.
Door
1 pc.
Handle
3 pcs.
Adjustable Pin
4 pcs. (+1 extra)
styles Customer Service: www.homestylesfurniture.com,home
[email protected], 888-680-7460
Hardware List
Part List

Assembly Instructions 2/6
STEP 1
Attach Back Rail (D) to Side Panel (C)
with Head Cap Bolt. (See Figure 1)
Slide Back Panel (I) into position.
Attach Back Upright (H) to unit.
Slide Back Panel (I) into position.
Attach Back Rail (G) to unit with Head Cap Bolt.
Attach Front Rail (E) to unit with Head Cap Bolt.
STEP 2
Attach Side Panel (B) to
unit with Head Cap Bolts.
Figure 1
IMPORTANT
Use a soft cloth between these parts and the floor.
Do not use power tools above 8 volts to assemble.
Do not tighten all the bolts until each part is properly assembled.
Keep Hex Wrench as the bolts may need to be tightened in the future.
B
Head Cap Bolt
G
II
E
C
Head Cap Bolt
D
H

Assembly Instructions 3/6
STEP 3
Attach Base (F) to unit with Head Cap Bolts.
Note: Arrow label indicates front of Base (F).
Attach Casters to unit with Wood Screws into
pre-drilled holes, with Locking Casters at front.
(See Figure 2)
Arrow label at front
J
J
M
STEP 4
Turn unit over to its upright
position.
Attach Arm Handles (J) to
unit with Head Cap Bolts.
Slide Arm (K) into
position.
Insert Adjustable Pins
into side panels at
desired level.
Place Shelf (M) into position.
Figure 2
Head Cap Bolt
Adjustable Pin
K
F
Head Cap Bolt
Wood Screw
Non-Locking Caster
Locking Caster

Assembly Instructions 4/6
STEP 5
Attach Doors (N) and (O) to
unit by sliding door hinges
into side panel hinges.
(See Figure 3)
Attach Handles to Doors (N)
and (O) with Machine Screws.
(See Figure )4
STEP 6
Attach Top (A) to unit with Head Cap Bolts.
Note: Arrow label indicates front of unit.
A
N
Handle
Machine Screw
Figure 4
Head Cap Bolt
Arrow label at front
O
Figure 3

Part List
Assembly Instructions 5/6
Drawer (L)
STEP 8
Slide Drawer Bottom (L5) into groove.
L1.
Drawer Front
1 pc.
L2.
Drawer Back
1 pc.
L3.
Drawer Side
1 pc.
L4.
Drawer Side
1 pc.
L5.
Drawer Bottom
1 pc.
STEP 7
Attach Drawer Sides (L3) and
(L4) to Drawer Front (L1) with
Wood Screws (long).
STEP 10
Attach Handle with Machine Screws.
STEP 9
Attach Drawer Back (L2) to unit
with Wood Screws (long).
L1
L3
L4
L5
L2
Wood Screw (long)
Bottom
Machine Screw
Handle
Wood Screw (long)
Bottom Bottom
Bottom Bottom
Bottom Bottom
Roller at back

Assembly Instructions 6/6
STEP 11
Slide Drawer (L) into position.
STEP 12
Cover holes with Wood Plugs.
(See Figure )5
L
Wood Plug
Figure 5

NEVER
use glass cleaners on
finished furniture. Ammonia
chemically attacks the finish.
allow liquids to remain on furniture.
Absorption causes parts to warp
and split and finishes to delaminate.
NEVER
CARE INSTRUCTIONS
Do not use rubber
based placemats.
PREVENT
DISCOLORING
Do not use commercial
waxes and polishes.
PREVENT
YELLOWING
Do not place hot
objects on surface.
PREVENT
FINISH DAMAGE
Do not write
directly on surface.
PREVENT
MARKING
Do not use power tools
above 8 volts to assemble.
PREVENT
CRACKING
Do not place
in direct sunlight.
PREVENT
FADING
with a soft cloth moistened
in lukewarm soap and water.
Buff with a dry clean cloth.
CLEAN
homestyles will provide replacements free of charge for missing or damaged parts within 30 days of purchase.
Digital images of the defective parts may be required. If the product was not purchased from an authorized retailer,
homestyles is under no obligation to provide replacement parts. Parts are not available for fully assembled items nor
are parts available for sale. Replacements for missing or damaged parts may be requested via contact info below.
styles Customer Service: www.homestylesfurniture.com,home
[email protected], 888-680-7460