Home Styles Maho 20 05663 0097 User manual

Hardware List
Part List
Home Styles Customer Service: www.homestyles-furniture.com,
[email protected], 888-680-7460, 877-831-0319
Tool(s) required for assembly: Phillips screwdriver
20 05663 0097
Barbecue Cart
IMPORTANT
Carefully remove all the parts from the carton and
place them individually on a soft cloth to prevent
scratches or other damage.
Carefully and strictly follow these assembly instructions
to ensure a completed product as designed.
Do not use power tools above 8 volts to assemble.
Caster
2 Locking
2 Non-Locking
4 pcs.
Wrench
1 pc.
Magnet
2 pcs.
Small Hex Wrench
1 pc.
Pin
4 pcs. (+1 extra)
M6x16
Flat Head Screw
12 pcs. (+1 extra)
M6x16
Wood Screw
4 pcs. (+1 extra)
Dowel
12 pcs. (+1 extra)
M6x60
Head Cap Bolt
18 pcs. (+1 extra)
B.
Side Panel
1 pc.
C.
Side Panel
1 pc.
D.
Shelf
2 pcs.
E.
Shelf
1 pc.
I.
Handle
1 pc.
K.
Handle
1 pc.
G.
Side Bar
1 pc.
J.
Handle
1 pc.
L.
Handle
1 pc.
H.
Side Bar
1 pc.
M.
Rack
1 pc.
Hook
4 pcs.
A.
Top
1 pc.
F.
Door
2 pcs.
Hex Wrench
1 pc.

Assembly Instructions 2/6
STEP 1
Attach Magnets to
Side Panels (B) and (C)
with Wood Screws into
pre-drilled holes, then tighten.
(See Figure 1)
IMPORTANT
Use a soft cloth between these parts and the floor.
Do not use power tools above 8 volts to assemble.
Do not tighten all bolts until each part is properly assembled.
Keep Hex Wrench and Wrench as bolts and casters may need to be tightened in the future.
STEP 2
Insert Dowels into
pre-drilled holes in Side Panel (C).
Attach Shelves (D) and Top (A)
to Side Panel (C) with Head Cap Bolts.
(See Figures 2 and 3)
Figure 1
Wood Screw
Magnet
D
D
A
Figure 3
Figure 2
Head Cap Bolt
Dowel
C
C
B

Assembly Instructions 3/6
STEP 3
Attach Side Panel (B) to unit with Dowels and Head Cap Bolts.
Dowel
Head Cap Bolt
B

Assembly Instructions 4/6
STEP 4
Turn unit upside down and place on a soft cloth.
Insert Casters into pre-drilled holes in unit, then tighten with Wrench.
(See Figure 4)
Non-Locking Caster
Locking Caster
Figure 4

Assembly Instructions 5/6
STEP 5
Turn unit over to its upright position.
Attach Doors (F) to unit with Flat Head Screws.
(See Figure 5)
Insert Pins into side panels at desired level.
(See Figure 6)
Place Shelf (F) into position.
Figure 5
Figure 6
Flat Head Screw
Pin
E
FF

Assembly Instructions 6/6
L
M
I
J
K
STEP 6
Attach Handle (I) to unit with Head Cap Bolt.
Place Side Bar (G) into position, then attach Handle (J)
to unit with Head Cap Bolt.
Attach Rack (M) to unit with Head Cap Bolts.
Attach Handles (K) and (L) to unit with Head Cap Bolts.
Place Side Bar (H) and Hooks into position.
(See Figure 7)
Head Cap Bolt
Hook
Figure 7
G
H

Home Styles will provide replacements free of charge for missing or damaged hardware or parts within 30 days of
purchase. Digital images of the defective parts may be required. If the product was not purchased from an authorized
retail affiliate, Home Styles is under no obligation to provide replacement parts. Parts are not available for fully assembled
items nor are parts available for sale. Replacements for missing or damaged hardware or parts may be requested at:
www.homestyles-furniture.com/customer-service/replacement-parts
Advisory Notes
·Do not use power tools above 8 volts to assemble.
·Periodic structural checks of this furniture should be undertaken. Do not use if there are any
doubts about its’ fitness for purpose.
·Exercise care so as to not trap fingers in any of the hinged parts of this furniture.
·Always use on firm level ground, ensuring that all legs remain in contact with the ground.
·Do not stand on a chair or sit or stand on any other item.
·Do not let children play with this furniture.
·This furniture should be stored under cover during periods of adverse weather (wet or cold)
and during winter. Clean and dry thoroughly before storage.
Tannin Exudation
Tannin is a naturally occurring substance which may exude from the surface of some wood species
and may stain the surface of hard areas such as patios or decks. To clean tannin marks use a
proprietary cleaning product or a water-based wood restorer containing oxalic acid. Stains must be
removed within 1-2 days of them occurring. Care should be exercised to follow the manufacturer's
guidelines of the cleaner used and test a small area first to determine its’ effectiveness. This is
especially important on wooden decking areas where the existing surface finish may be lifted due
to the application of the cleaning agent. If decking has become discolored from the cleaning, it
can be restored with a suitable wood finish.
Maintenance
In order to maintain the appearance of the wood, regular coatings of linseed oil must be applied.
The frequency will depend on the weather conditions experienced.
·Refer to the manufacturer’s guidelines of the linseed oil used.
·Apply the linseed oil with a clean cloth, wiping it directly onto the wood surface.
·Treat all surfaces of the furniture. Ensure that any hidden surfaces, such as those exposed
when the furniture is turned upside down, are adequately treated. Care should be given to
wipe the end grain, to all joints and to crevices that may have been caused by damage.
·Let the surface dry out. This can take 4-12 hours depending on weather conditions.
·Repeat the above steps with at least 2 more coats of oil. Extra coats may leave a semi-gloss
sheen once the oil has dried, but excess oil can be wiped off with a clean cloth.
·IMPORTANT: Cloths with linseed oil may be a fire hazard. Immediately after use, saturate all
cloths used for applying linseed oil with water and dispose of safely outside the home.
If left untreated, this furniture will turn a grayish color. Light sanding can restore the original color
after which linseed oil can be applied. Fine surface cracks may occur over time from weathering,
but these won't affect the structural integrity of the furniture.
CARE INSTRUCTIONS
Home Styles Customer Service: www.homestyles-furniture.com,
[email protected], 888-680-7460, 877-831-0319