Honeywell 5005 How to use

ENGLISH
Operation & Installation Guide
Steel Security Safe
with Programmable Digital Lock
Models 5005, 5005B, 5005P, 5005W / 5005G, 5005GB, 5005GP, 5005GW
Read this manual carefully and never store it inside the safe!

Welcome / Package Contents ........................................................................Page 1
Override Access Key / Install Batteries..........................................................Page 2
Testing Digital Lock / Programming New User Code....................................Page 3
Testing New User Code / Secure Lockout Period / Lost or Forgotten
User Codes / Care and Maintenance..............................................................Page 4
Anchoring Your Safe.........................................................................................Page 5
Consumer Assistance..............................................................................Page 6
Ordering Additional Override Access Keys / Safe Identication Record /
Digital User Code Record.........................................................................Page 7
Notes.......................................................................................................Page 8
Warranty Information...............................................................................Page 9
For Your Protection
• Do not remove the Serial Number tag from the safe.
• Never Store Override Access Keys inside safe.
• Record all Safe Identication Numbers on Safe Identication Record (page 7).
• Save this manual and NEVER keep it inside the safe.
Index

The following list outlines the items and quantities of each included with your new safe. Please
carefully check the list to conrm all items have been received. If any item is missing, please contact
Consumer Assistance (See page 6 for contact information).
Operation Manual (1 ea.)
Override Access Keys (2 ea.)
Mounting Hardware (1 set)
Your Honeywell Steel Security Safe will provide years of safe and secure protection for your valuables,
important documents and other personal items. All Honeywell safes are designed and built using the
highest manufacturing standards to ensure maximum user satisfaction under a variety of conditions.
With proper care, your Honeywell safe will provide “Peace of Mind” for many years to come.
Thank you and enjoy!
1
Attention: DO NOT RETURN SAFE TO STORE
If you are missing parts or have diculty operating your safe, please contact our Consumer Assistance
Department by telephone. Store will not accept returned products without prior authorization. You must
rst contact our consumer assistance department. (See page 6 for contact information)
WELCOME
PACKAGE CONTENTS

The batteries must be installed before using your safe. The battery compartment is located inside the
safe on the lock cover panel.
Note:
If both green and red LED’s are on, it is an indicator that the batteries are weak and must be changed
immediately. The User Code will not be erased if power is restored by replacing the batteries within 30
minutes. After 30 minutes, the User Code will be erassed and will need to be reprogrammed. Weak or
dead batteries should be replaced immediately and all 4 batteries should be changed. To replace the
batteries please follow STEPS 1 - 3. Remember to always remove batteries from safe if not using for an
extended period of time. If your batteries are completely dead and you cannot open the safe by using
the digital keypad, use the override access key to open safe and access the battery compartment. The
use of Non-alkaline or rechargeable batteries is NOT RECCOMMENDED.
1. Remove battery compartment cover and insert 4 “AA” batteries. Make sure that the
batteries are installed in the correct direction with regard to polarity (+ and -). (Figure 1 & Figure 2).
2. Replace the battery cover (Figure 3).
3. Proceed to the “Testing Digital Lock” section on next page.
2
INSTALL BATTERIES
OVERRIDE ACCESS KEY
Your safe is equipped with an override access key which allows immediate access in case you forget
your user codes or the batteries need to be installed or replaced.
1. Remove override key cover with small screwdriver (Figure 1).
2. Insert the override access key into the lock until it stops (Figure 2).
3. With the key inserted turn counter clockwise to the left (Figure 3).
4. Turn knob clockwise to the right and pull safe door open (Figure 4).
5. Remove override access key and store it in a safe place away from the safe. Replace the
cover over the key lock and proceed to “Install Batteries”.
Figure 1
Figure 1
Figure 2
Figure 2
Figure 3
Figure 3
Figure 4

3
6
9
E
2
5
8
0
1
4
7
C
5
9
E
3
1. Push the safe door to the closed position and turn the knob counter clockwise to the left (Figure 1).
2. Enter the preset primary factory code “1 5 9” followed by “E” key into the keypad. If the correct code
is entered, the green LED will light up (Figure 2).
3. The knob can then be turned clockwise to the right to open (Figure 3).
NOTE: You have approximately 5 seconds to open the safe. If you wait any longer, the safe will
re-lock and you must re-enter the code to open the safe.
4. To lock, close safe door and turn knob counter clockwies to the left (Figure 4).
PROGRAMMING NEW USER CODE
TESTING DIGITAL LOCK
3
6
9
E
2
5
8
0
1
4
7
C
5
9
E
3
6
9
E
2
5
8
0
1
4
7
C
Figure 1
Figure 1
Figure 2
Figure 2
Figure 3
Figure 3
Figure 4
Green LED
Green LED Yellow LED
Beep
1. Open door using the factory preset code of 159 followed by the “E” key (Figure 1).
2. Remove the battery cover to access the red reset button located on the inside of the battery
compartment. Press the red reset button and the yellow LED will light up (Figure 2).
3. Enter a new 3-8 digit Primary user code followed by the “E” key. Press “C” to clear entry if wrong
digit is entered (Figure 3).
4. Safe will beep and yellow light will turn o (Figure 4).
5. You can now close and lock the safe door and your new User Code is now active.
NOTE: The factory pre-set code will not work after a new pass code is programmed.
Figure 4

4
SECURE LOCKOUT PERIOD
If a wrong code is entered three times in a row, the digital keypad will begin a ve-minute secure
lockout period. During this secure lockout period the keypad will become disabled. Once the lockout
period has expired, the safe can be unlocked using the correct passcode. You may use the override
key to open safe, but keypad will complete the full lockout period.
LOST OR FORGOTTEN USER CODES
If the user code is lost or forgotten, you may open the safe using the Override Access key and use
the red reset button to reprogram the 3-8 digit user code. The instructions for opening the safe with
the override access key are located on page 2.
CARE AND MAINTENANCE
When properly maintained, your safe will continue to operate for many years. In order to ensure
optimum performance of your safe, please follow these simple precautions:
CLEAN HANDS - Never attempt to operate the digital keypad if your hands have excessive dirt, debris
or liquids on them.
CLEAN SAFE – To clean the surface of your safe, it is recommended that you use a mild cleaner (e.g.,
window cleaner) to avoid scratching or discoloring the surface. Always wipe dry and NEVER use
abrasive cleansers on the safe or digital keypad.
MOISTURE – We recommend that you place delicate items such as pictures or intricate jewelry into an
air-tight container before storing them in your safe. Avoid placing your safe in areas of high humidity.
For optimum performance, the safe should be opened and aired out for at least 20 minutes every two
weeks.
For future reference, store this Operation and Installation Guide in a secure area away from the safe.
DO NOT DISCARD!
TESTING NEW USER CODE
1. Push the safe door to the closed position and turn the knob counter clockwise to the left (Figure 1).
2. Enter the new User Code followed by “E” key into the keypad. If the correct code is entered, the
green LED will light up (Figure 2).
3. The knob can then be turned clockwise to the right to open (Figure 3).
NOTE: You have approximately 5 seconds to open the safe. If you wait any longer, the safe will
re-lock and you must re-enter the code to open the safe.
4. To lock, close safe door and turn knob counter clockwies to the left (Figure 4).
3
6
9
E
2
5
8
0
1
4
7
C
5
9
E
Figure 1 Figure 2 Figure 3 Figure 4
Green LED

5
ANCHORING YOUR SAFE
3
6
9
E
2
5
8
0
1
4
7
C
5
9
E
Figure 1 Figure 2 Figure 3
You may bolt your safe to the wall or oor to added theft protection and resistance to tipping. Your
safe has pre-drilled bolt-down holes in the back panel and in the oor.
To secure your safe to the wall and/or oor:
1. Select a suitable and convenient location for your safe.
2. Empty the safe and remove the carpet.
3. Locate the predrilled holes on the inside of safe.
4. Place your safe in the desired location.
5. Line up the predrilled holes and mark the oor or wall through the holes (Figure 1).
NOTE: It is not recommended to attempt to bolt to both oor and wall.
6. Move the safe aside to clear marked spots for drilling.
7. Drill holes appropriate for hardware being used and the mounting surface (Figure 2).
INCLUDED: (2 each – bolts, washers and masonry anchors).
8. Place the safe back over the holes and install the fasteners as required (Figure 3).
9. Once completed, replace the carpet.
NOTE: Bolting/unbolting of the unit is at the consumer’s expense and discretion. LH Licensed
Products is not responsible for any costs incurred if the unit is to be replaced.
If you have any questions about mounting the safe, please check with your local home center/
hardware retailer or independent contractor.

6
EMAIL: [email protected]
WEBSITE:www.honeywellsafes.com
ADDRESS: Consumer Assistance Dept.
LH Licensed Products, Inc., 860 East Sandhill Avenue Carson, CA 90746 USA
TELEPHONE: US/Canada 1-877-354-5457 (Toll Free)
Mexico 01-800-288-2872 After English voice recording stops you must then enter 800-860-1677
to complete your call. (Toll Free)
Australia 0011-800-5325-7000 (Toll Free)
Germany/New Zealand 00-800-5325-7000 (Toll Free)
Other Countries XX*-310-323-5722 (Toll Charges Apply)
XX*- Dial U.S. Country Code rst
CALL CENTER HOURS: US/Canada 7am – 5pm (Pacic**) Mon – Fri (Subject to change)
CALL BACK HOURS: Other Countries 7am – 8pm (Pacic**) Mon – Fri (Subject to change)
Pacic**- Local time in Los Angeles, CA, USA
* Insert correct Country Code
** Local Time based on Los Angeles California USA
INTERNATIONAL CALL BACK HOURS:
If you need to speak with a consumer assistant and cannot contact us during the Call
Center hours above, please send an email or leave a telephone message, including your Name,
Telephone Number and the best time for us to contact you during the Call Back hours above and we
will make our every eort to contact you and help answer any of your questions or concerns.
CONSUMER ASSISTANCE

7
The following information is required to order keys:
1. PROOF OF OWNERSHIP (1 of 2 Options Below)
A) SALES RECEIPT & IDENTIFICATION – INTERNATIONAL ORDERS ONLY!
• Copy of sales receipt showing Store, Date & Product Description.
• Copy of your picture I.D. (Drivers license, passport, regular I.D.).
B) PRODUCT OWNERSHIP VERIFICATION FORM
If sales receipt is not available, contact us by email or telephone to request a “Product
Ownership Verication Form”.
2. ORDER INFORMATION
CONTACT
• Name & Shipping Address
• E-mail address (If Available)
• Telephone Number
• Best Time to Contact You
3. PLACING AN ORDER
• To begin the order process, contact us by telephone, email, or mail
4. METHOD OF PAYMENT
• Visa, MasterCard, Check or Money Order
NOTE: For pricing please contact Consumer Assistance. Contact information is located on the back
cover of this manual. Payment method and pricing subject to change.
Model Number:
Serial Number:
Override Access Key Number:
User Code:
ORDERING ADDITIONAL OVERRIDE ACCESS KEYS
SAFE IDENTIFICATION RECORD
DIGITAL USER CODE RECORD
PRODUCT
• Model #
• Serial #
• Lock Key #
• Quantity of Keys Ordered

8
NOTES