Huawei HG659 User manual

Quickstart Guide
Origin Home Gateway

Your Origin Home Gateway
What do all the
lights, buttons
and ports mean?
Please wait until you have
received an SMS or email
advising that your Origin
broadband service is active.
Once you have received this
follow our step-by-step guide.
Off Steady green Blinking green
Power The power is
switched off
Your gateway
is powered on -
WAN -
Your gateway
is synced to
nbn™ or ADSL
Your gateway
is syncing to
nbn™ or ADSL
Internet
Your gateway is
not connected
to the internet
Your gateway is
connected to the
Internet
Data is being
transmitted
WLAN WiFi is off WiFi is enabled WiFi data is being
transmitted
VolP No Origin Home
Phone connected
Your Origin Home
Phone service is
connected
Your Origin Home
Phone service is in
use
LAN1-LAN4 No device connected
to the LAN port
The LAN port has
a device connected
Data is being
transmitted

HUAWEI TECHNOLOGIES CO., LTD.
MAC: XXXXXXXXXX
S/N: XXXXXXXXXXXXXXXXXXXX XXXX
WLAN Key: XXXXXXXX
SSID(5G): HUAWEI-XXXXXX-5G
SSID: HUAWEI-XXXXXX
MADE IN CHINA
What’s on the back?
All the important connection
ports and details are on the back
of your Origin Home Gateway.
Power
DSL Phone2 Phone1 LAN4 LAN3 LAN2 LAN1 WAN USB
Reset
Power connection
The power adaptor
connects here
Voice port
For your Origin Home
Phone service
Power button
Turn the gateway on
or off
WAN Port
Blue port for
some nbn™
connection
types
WLAN
Turn your
WiFi on
or off
LAN ports
Yellow ports to
connect your
Ethernet devices
Factory reset
Hold the button for 10
seconds to perform a
factory reset
nbn™
DSL
Phone
Line
nbn™
DSL
Phone
Line
nbn™
DSL
Phone
Line
nbn™
DSL
Phone
Line
nbn™
DSL
Phone
Line
nbn™
DSL
Phone
Line
nbn™
DSL
Phone
Line
nbn™
DSL
Phone
Line
nbn™
DSL
Phone
Line
nbn™
DSL
Phone
Line
DSL port
For ADSL or
some nbn™
connection
types
Gateway Information
Serial number and
other information about
your gateway
WPS
WiFi
protected
setup

Power
DSL Phone2 Phone1 LAN4 LAN3 LAN2 LAN1 WAN USB
Reset
HUAWEI TECHNOLOGIES CO., LTD.
MAC: XXXXXXXXXX
S/N: XXXXXXXXXXXXXXXXXXXX XXXX
WLAN Key: XXXXXXXX
SSID(5G): HUAWEI-XXXXXX-5G
SSID: HUAWEI-XXXXXX
MADE IN CHINA
Set up your nbn™
Broadband connection
12
Connect one end of the power adaptor to
your Origin Home Gateway and the other
end into a power point and switch it on.
Ready to get online?
Start by powering
up your new Origin
Home Gateway.
If you have an ADSL connection
then go to step 3.
If nbn™ has installed a device at your
premises:
• Check the nbn™ connection box is
powered on.
• Take the yellow Ethernet cable and
plug one end into the blue WAN port
of your Origin Home Gateway and the
other end into the UNI-D port on your
nbn™ connection box.
nbn™
DSL
Phone
Line
Power
DSL Phone2 Phone1 LAN4 LAN3 LAN2 LAN1 WAN USB
Reset
Power
DSL Phone2 Phone1 LAN4 LAN3 LAN2 LAN1 WAN USB
Reset
Power
DSL Phone2 Phone1 LAN4 LAN3 LAN2 LAN1 WAN USB
Reset
Power
DSL Phone2 Phone1 LAN4 LAN3 LAN2 LAN1 WAN USB
Reset
nbn™
DSL
Phone
Line
If nbn™ has not supplied any equipment:
• Connect one end of the grey
telephone cable directly into your
telephone wall socket, and the other
end into the grey DSL port on your
Origin Home Gateway.
Telephone
wall socket
nbn™
UNI-D port

Set up your ADSL
Broadband connection
Powering on your
Origin Home Gateway
3 4
Power
DSL Phone2 Phone1 LAN4 LAN3 LAN2 LAN1 WAN USB
Reset
nbn™
DSL
Phone
Line
Power
Reset
On/Off
Power
DSL Phone2 Phone1 LAN4 LAN3 LAN2 LAN1 WAN USB
Reset
Power
DSL Phone2 Phone1 LAN4 LAN3 LAN2 LAN1 WAN USB
Reset
Switch on the Origin Home Gateway by
pressing the power button on the side.
Your gateway will now automatically
setup - there is no need for you to
configure anything. This process can take
up to 20 minutes to complete, so please
be patient.
The Internet light will turn solid green
once the setup is complete.
When your Origin Broadband service is in
use the Internet light will flash green.
If you have an nbn™ connection
then go to step 4.
Connect one end of the grey telephone
cable directly into your telephone wall
socket, and the other end into the grey
DSL port on your Origin Home Gateway.
If you have an existing home phone you
will need to install an ADSL filter (available
from any computer store) to ensure your
service works correctly. Please note this is
only for ADSL connections.
Telephone
wall socket
Home
phone
Telephone
wall socket
nbn™
DSL
Phone
Line
Connect one end of the grey telephone
cable into the DSL port of the ADSL filter
and the other end into the DSL port of
your Origin Home Gateway. Connect
the other grey telephone cable into the
Line port of the filter and the other end
into your telephone wall socket. Finally,
connect your existing home phone cable
into the Phone port of the filter.
ADSL
filter
Having trouble connecting?
Read our troubleshooting tips after
step 8 if the Internet light does not
turn green.

Set up your Origin
Home Phone service
Connecting
via WiFi
5 6
Power
DSL Phone2 Phone1 LAN4 LAN3 LAN2 LAN1 WAN USB
Reset
Power
DSL Phone2 Phone1 LAN4 LAN3 LAN2 LAN1 WAN USB
Reset
We recommend that you use the
faster 5GHz network.
Your 2.4 GHz network (the non-5G SSID)
has slower speeds but greater range.
If you are experiencing issues in some
areas of your house, or are using an older
device that can only see this network, try
using this one.
Skip this step if you didn’t order
an Origin Home Phone service.
Connect one end of your grey telephone
cable into the grey Phone1 port on your
Origin Home Gateway and the other end
into your telephone handset.
Porting your existing phone number to
Origin?
If you’ve asked us to port your existing
phone number to an Origin Home Phone
service, please allow up to 10 days
after your nbn™ service is active for this
porting process to complete. We’ll send
you an email to confirm when it is ready
to use.
Home
phone
nbn™
DSL
Phone
Line
Your unique WiFi network name (SSID)
and WiFi password will be sent to you
via email and SMS when your service is
active.
1. Make sure that WiFi is enabled on your
computer, tablet, smartphone or other
WiFi device.
2. View the list of available WiFi networks
on your device.
3. Select the network shown in your email
or SMS. It will look similar to:
XXX-XXXXXX-ORIGIN5GHZ or
XXX-XXXXXX-ORIGIN
The X’s will be unique to your Gateway.
4. Enter the WiFi password exactly as
shown in the email or SMS sent to you.

Connecting
via Ethernet
78
Congratulations, you’re now connected!
What are you waiting for? Start surfing.
Troubleshooting tips
If you are unable to successfully connect
to your Origin Home Gateway via WiFi
or directly via an Ethernet cable, follow
these steps that may help you get back
up and running.
• Power off your Origin Home Gateway
and any attached equipment.
• Check that your Origin Home Gateway
has been plugged in correctly.
• If you have an nbn™ connection box,
check that it is switched on.
• Double check you have followed the
correct cabling instructions for your
nbn™ or ADSL connection - it is really
important to ensure the cables are
plugged into the correct ports.
• After 2 minutes, power on your Origin
Home Gateway by pressing the power
button on the side.
• The automated setup and connection
process can take up to 20 minutes to
complete - the Internet light will turn
solid green when it has successfully
connected.
• If you are connecting your device via
WiFi, try ‘forgetting’ the connection
and following step 6 again.
• If you are still experiencing connection
issues please contact us.
nbn™
DSL
Phone
Line
Power
DSL Phone2 Phone1 LAN4 LAN3 LAN2 LAN1 WAN USB
Reset
LAN4 LAN3 LAN2 LAN1 WAN USB
You can connect up to 4 devices directly
to the Origin Home Gateway via Ethernet
cables.
Your
device
You are now
connected!
Connect devices (such as your desktop
comptuer) via an Ethernet cable to any of
the yellow LAN ports on the back of the
Origin Home Gateway and connect the
other end into the Ethernet port on your
device.

Box contents: Need help? Contact us.
originbroadband.com.au
[email protected]
1300 508 830
• Origin Home Gateway
• Power Adaptor
• Yellow Ethernet Cable
• 2 x Grey Telephone Cables
• Quickstart Guide
Box contents: