Husky H120N User manual

THANK YOU
We appreciate the trust and condence you have placed in Husky through the purchase of this inator. We strive to
continually create quality products designed to enhance your home. Visit us online to see our full line of products
available for your home improvement needs. Thank you for choosing Husky!
USE AND CARE GUIDE
120-VOLT INFLATOR
Questions, problems, missing parts?
Before returning to the store, call
Husky Customer Service
8 a.m. - 7 p.m., EST, Monday - Friday
9 a.m. - 6 p.m., EST, Saturday
1-888-HD-HUSKY
HUSKYTOOLS.COM
Item #1009 544 671
Model #H120N

2
Table of Contents
Safety Information.....................................................2
Polarized Plug And Outlet.......................................3
Extension Cord.......................................................3
Warranty.....................................................................3
Pre-Operation ............................................................3
Specications ........................................................3
Package Contents ..................................................4
Operation - Inflate Tires ............................................5
Operation - Inflate Toys and Air Mattresses.............6
Maintenance ..............................................................7
Servicing of a Double-Insulated Product ...............7
Care and Cleaning .....................................................7
Troubleshooting .........................................................7
Recommended Pressure ...........................................7
Safety Information
PRECAUTIONS
1. Read all instructions carefully.
2. The safety instructions provided in this manual are
not intended to cover all possible conditions that
may occur during product operation. Always use
common sense and pay attention to all WARNING
and CAUTION statements in this manual.
3. Keep your work area clean and well lit. Cluttered
benches and dark areas increase the possibility of
personal injury or property damage.
4. Do not operate power tools in explosive
atmospheres, such as in the presence of ammable
liquids, gases, or dust.
5. Keep bystanders, children, and visitors away while
operating a power tool. Distractions can cause you
to lose control.
6. To protect against re, electric shock, and injury
to persons do not immerse the cord, plugs, or the
product in water or other liquids.
7. Close supervision is necessary when any appliance
is used by or near children.
8. Unplug from the outlet when not in use and before
cleaning.
9. Do not operate any appliance with a damaged
cord or plug or after the appliance malfunctions,
or has been damaged in any manner. Return the
appliance to the nearest authorized service facility
for examination, repair, or adjustment.
10. The use of accessory attachments not
recommended by the appliance manufacturer may
result in re, electric shock, or injury to persons.
11. Do not let the supply cord hang over the edge of a
table or counter, or touch hot surfaces, such as the
inator head.
12. Do not use the appliance for other than intended
use.
13. This appliance has a polarized plug (one blade
is wider than the other). This plug will t in a
polarized outlet only one way. If the plug does not
t fully in the outlet, reverse the plug. If it still does
not t, contact a qualied electrician to install the
proper outlet. Do not change the plug in any way.
14. Risk of Injury – Do not direct the air stream towards
the body.
15. To reduce the risk of electric shock, do not expose
to rain. Store indoors when not in use.
16. Risk of Bursting – Use only recommended included
accessories.
17. This inator is designed to inate car tires, bike
tires, ATV tires, sports equipment, air mattresses,
beach toys, and other inatables. Do not use for
any purpose other than inating. If you do so, bodily
harm or personal injury can occur.
18. Allow the inator to cool down for 15 minutes after
each 5 minutes of continuous operation.
19. Disconnect the inator from the 120-Volt power
outlet to turn the power off after using the inator.
20. The inator is not a toy. Keep away from children
at all times.
21. Do not carry the inator by the air hose or power
cord as damage may occur.
22. Do not leave the inator unattended while in
operation.
23. Do not over-inate the item you are inating. Follow
the manufacturer’s instructions for your item.

3 HUSKYTOOLS.com
Please contact 1-888-HD-HUSKY for further assistance.
Safety Information (continued)
24. Keep the inator away from ammable areas/
liquids at all times.
25. Do not operate the inator in wet or damp areas.
26. Operate the inator only with the accessories and
or attachments that are included.
27. Always wear safety glasses when operating the
inator.
28. Save these instructions for future reference.
FOR HOUSEHOLD USE ONLY
WARNING: Read and understand all
instructions. Failure to follow the instructions in
this manual can result in electric shock, re and/or
serious personal injury.
WARNING: If your vehicle engine is turned on
and running when you are using your inator,
you must be absolutely sure that your vehicle is
outside or in an open, well-ventilated area and not
inside a conned closed area such as a garage.
Always allow for proper ventilation if you are
running your vehicle engine. If you do not follow
these instructions, bodily harm or asphyxiation
resulting in death could occur.
POLARIZED PLUG AND OUTLET
This appliance has a polarized plug (one blade is wider than the
other). This plug will t in a polarized outlet only one way. If the
plug does not t fully in the outlet, reverse the plug. If it still does
not t, contact a qualied electrician to install the proper outlet.
Do not change the plug in any way.
EXTENSION CORD
Use only a 2‐wire extension cord that has a 2‐blade plug and a 2‐slot receptacle that will accept the plug on the
product. Make sure your extension cord is in good condition. When using an extension cord, be sure to use one
heavy enough to carry the current your product will draw. For lengths less than 6 ft., use No. 18 AWG extension
cords. An undersized cord will cause a drop in line voltage, resulting in loss of power and overheating.
Warranty
If this Husky product fails due to a defect in material or workmanship within 2 years from date of purchase, return
to any Home Depot store for disposition.
Contact the Customer Service Team at 1-888-HD-HUSKY or visit www.HUSKYTOOLS.com.
Pre-Operation
WARNING: Read and understand all
instructions. Failure to follow the instructions in
this manual can result in electric shock, re and/or
serious personal injury.
WARNING: Always operate the inator with
the power cord storage compartment door open.
This allows for proper cooling while the inator
is in use.
SPECIFICATIONS
Voltage 120 VAC
Power Requirement 120 VAC / 60Hz / 1.1A
Max. Pressure 130 PSI
Polarized Outlet
Polarized Plug
(one blade is wider than the other)

4
Pre-Installation (continued)
PACKAGE CONTENTS
F
A
H
PQ
R
E
D
C
B
O
K
G
J
I
N
M
L
Part Description Quantity
A Backlit Digital Pressure Gauge 1
BLED Worklight 1
C Air Hose Storage 1
DTire Valve Cap Tray 1
E Target PSI Decrease Button 1
F 120-Volt Power Cord Storage 1
G 120-Volt Power Cord 1
H Carrying Handle 1
I Start/Stop Button 1
J On/Off LED Worklight Button 1
K Target PSI Increase Button 1
LQuick Connect Valve Adapter 1
M Air Hose 1
N Accessories Storage 1
OExtra Tire Valve Caps 1
P Mattress Nozzle 1
Q Sports Needle 1
RPresta Valve Adapter 1

5 HUSKYTOOLS.com
Please contact 1-888-HD-HUSKY for further assistance.
Operation - Inate Tires
1Connecting the Inflator
□Place the inator on a at surface.
□Plug the power cord (G) into a polarized
120-Volt outlet. The inator will automatically
power on.
□Connect the quick connect valve adapter (L) to
the tire air valve by pushing the valve lever on
the valve adapter (L) down until it is securely
attached to the tire air valve.
CAUTION: Do not over-inate the item you are
inating. Follow the manufacturer’s instructions
for the item you are inating.
G
L
2Operating the Inflator
□Press the target PSI button + or – (K or E) to
set a target PSI. The digital display will ash 3
times with the set target PSI. On the 4th ash,
the display will show the current air pressure
for the item being inated. This indicates that
the target PSI has been set and the inator is
ready to begin inating.
□Press the Start/Stop button (I) to start or stop
ination.
NOTE: The inator will shut off automatically
when the target PSI is reached.
□To power off the inator, unplug the power
cord(G) from the polarized 120-Volt outlet.
Allow the inator to cool.
I EK
3Disconnecting the Inflator
□Remove the air hose (M) from the tire by lifting
up on the quick connect valve adapter (L) lever
and remove the valve adapter (L).
□To power off the inator, unplug the power
cord (G) from the polarized 120-Volt outlet.
Allow the inator to cool.
L
M
4Operating the LED Worklight
□Press the LED worklight button (J) to turn on
or turn off.
J

6
Operation - Inate Toys and Air Mattresses
1Connecting the Inflator
□Place the inator on a at surface.
□Plug the power cord (G) into a polarized
120-Volt outlet. The inator will automatically
power on.
□Select the appropriate ination accessory
(P,Q,R) and insert it into the quick connect
valve adapter (L). Make sure the accessory
(P,Q,R) is ush with the end of the quick
connect valve adapter (L) so that the airow to
the accessory is not blocked by the tire valve
pin inside the quick connect valve (L).
CAUTION: Do not over-inate the item you are
inating. Follow the manufacturer’s instructions
for the item you are inating.
L Q
2Disconnecting the Inflator
□Remove the ination accessory (P,Q,R) from
the quick connect valve adapter (L).
□To power off the inator, unplug the power
cord (G) from the polarized 120-Volt outlet.
Allow the inator to cool.
L P

7 HUSKYTOOLS.com
Please contact 1-888-HD-HUSKY for further assistance.
Maintenance
SERVICING OF A DOUBLE-INSULATED PRODUCT
□In a double-insulated product, two systems of insulation are provided instead of grounding. No grounding
means is provided on a double-insulated product, nor should a means for grounding be added to the product.
□Servicing of a double-insulated product requires extreme care and knowledge of the system, and should be
done only by qualied service personnel.
□Replacement parts for a double-insulated product must be identical to those parts in the product.
Care and Cleaning
□Clean the inator with a non-abrasive slightly damp cloth as needed.
□Locate the inator in a clean, dry, and well ventilated area. The inator pump and housing are designed to
allow for proper cooling. The ventilation openings on the inator are necessary to maintain proper operating
temperature. Do not place rags or other materials on or near these openings.
□Wipe plastic parts clean using mild soap and warm water.
□Any other servicing should be done by an authorized service representative.
Troubleshooting
Problem Possible Cause Solution
The unit will not start. The cord is not plugged in. Plug the cord into a working 120-Volt AC power
outlet.
The circuit breaker is tripped. Reset the circuit breaker.
Recommended Pressure
Car Tire 25-35 PSI
SUV Tire 30-45 PSI
Bike Tire 40-110 PSI
Sports Balls 5-15 PSI
WARNING: These pressure ratings are
recommendations only. Always read and follow
manufacturers’ guidelines for specied pressure
settings.

Questions, problems, missing parts? Before returning to the store,
call Husky Customer Service
8 a.m. - 7 p.m., EST, Monday-Friday, 9 a.m. - 6 p.m., EST, Saturday
1-888-HD-HUSKY
HUSKYTOOLS.COM
Retain this manual for future use.