Hytera BP36X User manual

AP32X Two-way Radio
BP36X Digital Portable Radio
QUICK REFERENCE GUIDE

Product Layout
AP32X
BP36X
NOTE
• To assignotherfeaturestoprogrammablekeys,contact
yourdealer.
• Figuresinthisguideareonlyforreference.
Belt Clip
Audio Jack
USB Type-C Port
OLED Display
Back/On-Off Key
Down Key
Channel
Selector Knob
Speaker
Microphone
Strap Hole
P2 Key
(Programmable)
Up Key
Top Key (TK)
(Programmable)
Push-to-Talk
(PTT) Key
Volume Up Key
(Programmable)
Volume Down Key
(Programmable)
Antenna
LED Indicator
OK/Menu Key
P1 Key
(Programmable)
Belt Clip
Audio Jack
USB Type-C Port
Strap Hole
Channel
Selector Knob
On/Off Key
Speaker
Microphone
Push-to-Talk (PTT) Key
Volume Up Key
(Programmable)
Antenna
LED Indicator
Volume Down Key
(Programmable)

Select a Channel
Rotate the Channel Selector knob.
Call Services
To ensure optimal voice quality on the receiving radio, keep the
microphone 2.5 cm to 5 cm from your mouth during speaking.
Make a Digital Call (BP36X Only)
Through Preset Contact
1. Rotate the Channel Selector knob to select a digital channel.
2. Press and hold the PTT key.
Through Contact List
1. In the contact list, select a contact.
2. Press and hold the PTT key.
Make an Analog Call Without Signaling
1. Rotate the Channel Selector knob to select an analog channel.
2. Press and hold the PTT key.
Status Indications
LED Indicator
LED Indicator Radio Status
Flashes green The radio is being turned on.
Glows red The radio is transmitting.
Glows green The radio is receiving.
Flashes red
once every
minute
The battery power is low.
Flashes orange The radio is scanning.
Glows orange Call hang time: No voice is being transmitted
or received during a call.
Flashes blue
Every 3s
BT is enabled,
and no accessory
is connected.
Every 1.5s A BT accessory is
connected.
Every 0.1s BT is being
disabled.
Basic Operations
Charge the Radio
CAUTION
• ReadtheSafety Information Booklet beforecharging.
• Theremaininglithium-ionbatterypowerislimitedto30%
pursuanttothenewlithiumbatteryshipmentregulation
approvedbytheInternationalAirTransportAssociation(IATA).
Connect the radio to a power adapter, power bank, or PC through the
USB Type-C data cable.
During charging, check the charging status through the LED indicator.
LED Indicator Charging Status
Glows red Charging
Flashes red once every 1s Charging fault
Glows green Fully charged
Turn On or O󽗈 the Radio
Long press the On/O󽗈 key.
Check the Battery Level (AP32X Only)
LED Indicator Battery Level
Glows green for 2s High
Glows orange for 2s Medium
Glows red for 2s Low
Adjust the Volume
Press the Volume Up key to increase or the Volume Down key to
decrease the volume.
Select a Zone
Through Programmable Key
Press the preprogrammed Zone Up key or Zone Down key.
Through Zone List (BP36X Only)
1. On the home screen, press the OK/Menu key.
2. Press the Up key or Down key to select Zone, and then press the
OK/Menu key.
3. Select the zone, and then press the OK/Menu key.

For details, please visit our website at: https://www.hytera.com/en/
download-center.html, or scan the QR code to download the relevant
User Manual.
LCD Icon Radio Status
More bars indicate more remaining battery power.
The battery runs out.
The battery is being charged.
The BT is enabled.
A BT accessory is connected.
The radio detects no signal.
More bars indicate stronger signal.
In analog mode, the radio transmits when the PTT
key is pressed.
The radio operates in low TX power.
The radio operates in high TX power.
The radio is scanning.
The radio stays on an active channel.
Direct Mode: The radio transmits and receives
directly.
Repeater Mode: The radio transmits and receives
through a repeater.
Voice Activated Transmit (VOX) is enabled.
The speaker is turned on.
The radio operates in Silent Mode.
An accessory is connected.
Monitor is enabled.
Scrambler is enabled.
Squelch O󽗈 is enabled.
D
R
AP32X BP36X
Status Icons (BP36X Only)