Icom IC-V8 User manual

S-13802MZ-C1
© 2001 Icom Inc.
1-1-32, Kamiminami, Hirano-ku, Osaka 547-0003, Japan
Count on us!
iC-v8
iC-v8
VHF TRANSCEIVER

Communication Equipment
Himmelgeister Str. 100, D-40225 Düsseldorf, Germany
Phone:0211 346047 Fax : 0211 333639
URL : http://www.icomeurope.com
Unit 9, Sea St., Herne Bay, Kent, CT6 8LD, U.K.
Phone:01227 741741 Fax : 01227 741742
URL : http://www.icomuk.co.uk
Zac de la Plaine, Rue Brindejonc des Moulinais
BP 5804, 31505 Toulouse Cedex, France
Phone:561 36 03 03 Fax : 561 36 03 00
URL : http://www.icom-france.com
Crta. de Gracia a Manresa Km.14,750
08190 Sant Cugat del Valles Barcelona, SPAIN
Phone : (93)590 26 70 Fax : (93)589 04 46
URL : http://www.icomspain.com
<
Corporate Headquarters
>
2380 116th Avenue N.E., Bellevue, WA 98004, U.S.A.
Phone : (425)454-8155 Fax : (425)454-1509
URL : http://www.icomamerica.com
<
Customer Service
>
Phone : (425)454-7619
Glenwood Centre #150-6165
Highway 17 Delta, B.C., V4K 5B8, Canada
Phone : (604)952-4266 Fax : (604)952-0090
URL : http://www.icomcanada.com
A.B.N.88 006 092 575
290-294 Albert Street, Brunswick, Victoria, 3056, Australia
Phone:03 9387 0666 Fax : 03 9387 0022
URL : http://www.icom.net.au
146A Harris Road, East Tamaki,
Auckland, New Zealand
Phone:09 274 4062 Fax : 09 274 4708
URL : http://www.icom.co.nz 6F No.68, Sec.1 Cheng-Teh Road, Taipei, Taiwan, R.O.C.
Phone:(02) 2559 1899 Fax : (02) 2559 1874
1-1-32, Kamiminami, Hirano-ku, Osaka 547-0003, Japan
Phone : 06 6793 5302
Fax : 06 6793 0013
URL : http://www.icom.co.jp/world/index.html
INTRODUCTION
DANGER
ORDERING PARTS
REPAIR NOTES
This service manual describes the latest service information
for the IC-V8 at the time of publication.
NEVER connect the transceiver to an AC outlet or to a DC
power supply that uses more than 10.3 V. Such a connection
could cause a fire hazard and/or electric shock.
DO NOT expose the transceiver to rain, snow or any liquids.
DO NOT reverse the polarities of the power supply when con-
necting the transceiver.
DO NOT apply an RF signal of more than 20 dBm (100mW)
to the antenna connector. This could damage the transceiv-
er’s front end.
Be sure to include the following four points when ordering
replacement parts:
1. 10-digit order numbers
2. Component part number and name
3. Equipment model name and unit name
4. Quantity required
<SAMPLE ORDER>
0910053802 PCB B-5649B IC-V8 MAIN UNIT 1 pieces
8810009560 Screw BT M2 x 6 ZK IC-V8 Chassis 10 pieces
8810009510 Screw BT 2 x 4 NI IC-V8 Chassis 10 pieces
Addresses are provided on the inside back cover for your
convenience.
1. Make sure a problem is internal before disassembling the transceiver.
2. DO NOT open the transceiver until the transceiver is disconnected from its power source.
3. DO NOT force any of the variable components. Turn them slowly and smoothly.
4. DO NOT short any circuits or electronic parts. An insulated turning tool MUST be used for all adjustments.
5. DO NOT keep power ON for a long time when the transceiver is defective.
6. DO NOT transmit power into a signal generator or a sweep generator.
7. ALWAYS connect a 40 dB to 50 dB attenuator between the transceiver and a deviation meter or spectrum analyzer when
using such test equipment.
8. READ the instructions of test equipment thoroughly before connecting equipment to the transceiver.
To upgrade quality, all electrical or mechanical parts and
internal circuits are subject to change without notice or oblig-
ation.

TABLE OF CONTENTS
SECTION 1 SPECIFICATIONS
SECTION 2 INSIDE VIEWS
SECTION 3 DISASSEMBLY INSTRUCTIONS
SECTION 4 CIRCUIT DESCRIPTION
4 - 1 RECEIVER CIRCUITS ................................................................................................... 4 - 1
4 - 2 TRANSMITTER CIRCUITS ............................................................................................ 4 - 2
4 - 3 PLL CIRCUIT................................................................................................................... 4 - 3
4 - 4 OTHER CIRCUITS.......................................................................................................... 4 - 3
4 - 5 POWER SUPPLY CIRCUITS ......................................................................................... 4 - 3
4 - 6 CPU PORT ALLOCATIONS ........................................................................................... 4 - 4
SECTION 5 ADJUSTMENT PROCEDURES
5 - 1 PREPARATION................................................................................................................ 5 - 1
5 - 2 PLL ADJUSTMENT.......................................................................................................... 5 - 2
SECTION 6 PARTS LIST
SECTION 7 MECHANICAL PARTS AND DISASSEMBLY
SECTION 8 SEMI-CONDUCTOR INFORMATION
SECTION 9 BOARD LAYOUTS
9 - 1 MAIN UNIT....................................................................................................................... 9 - 1
SECTION 10 BC-146 OPTIONAL DESKTOP CHARGER INFORMATION
10 - 1 PARTS LIST................................................................................................................... 10 - 1
10 - 2 DISASSEMBLY INFORMATION.................................................................................... 10 - 1
10 - 3 VOLTAGE DIAGRAM..................................................................................................... 10 - 2
10 - 4 BOARD LAYOUT........................................................................................................... 10 - 2
SECTION 11 BLOCK DIAGRAM
SECTION 12 VOLTAGE DIAGRAM

SECTION 1 SPECIFICATIONS
1 - 1
‘‘GENERAL
• Frequency coverage :
*Specifications Guaranteed: 144–148 MHz only
• Type of emission : F2D/ F3E
• Frequency stability : ± 10 ppm
(–10˚C to +60˚C; +14˚F to +140˚F)
• Tuning steps : 5, 10, 12.5, 15, 20, 25, 30 or 50 kHz
• Antnna connector : BNC (50 Ω)
• Power supply requirement : 7.2 V DC (Operable voltage range: 6.0 to 10.3 V)
(negative ground)
• Number of memory channel : 100 channels
• Call channel : 1 channel
• Scanning mode : Program, Memory, Skip, Priority or Tone
• Current drain (approx.) : Transmit at High (5.5 W) 2.0 A
at Low (0.5 W) 0.7 A
Receive Max. audio 250 mA
stand-by 70 mA
power saved 20 mA
• Usable temperature range : –10˚C to +60˚C; +14˚F to +140˚F
• Dimensions (projections not included) : 54(W) × 132(H) × 35(D) mm; 2 1⁄8(W) × 5 3⁄16(H) × 1 3⁄8(D) in.
•Weight (with ant., BP-222) : 350 g; 12.3 oz.
‘‘TRANSMITTER
•RF output power (at 7.2 V DC) : 5.5 W / 0.5 W (High / Low)
(with supplied battery pack)
•Modulation system : Variable reactance frequency modulation
•Maximum frequency deviation : ±5.0 kHz
•Spurious emissions : Less than –60 dB
•Ext. microphone connector : 3-conductor 2.5(d) mm (1⁄10”)/2.2 kΩ
‘‘RECEIVER
•Receive system : Double conversion superheterodyne system
•Intermediate frequencies : 1st 21.7 MHz
2nd 450 kHz
•Sensitivity : 0.16 µV at 12 dB SINAD (typical)
•Squelch sensitivity : 0.1 µV at threshold (typical)
•Adjacent channel selectivity : 65 dB (typical)
•Spurious response rejection : 75 dB (typical)
•Intermodulation rejection ratio : 65 dB (typical)
•Audio output power (at 7.2 V DC) : More than 300 mW at 10% distortion with an 8 Ωload
•Ext. speaker connector : 3-conductor 3.5(d) mm (1⁄8”)/8 Ω
All stated specifications are subject to change without notice or obligation.
Receive
136.000–174.000 MHz*
Transmit
144.000–148.000 MHz
136.000–174.000 MHz*
Version
[USA]
[GEN]

2-1
SECTION 2 INSIDE VIEWS
Power amplifier
(Q1: 2SK3476)
Antenna swtching circuit
(D2, D8: MA77)
Antenna swtching circuit
(D1: MA77)
TOP VIEW BOTTOMVIEW
RF amplifier
(Q12: 3SK274)
VCO circuit
1st mixer
(Q13: 3SK274)
TX/RX switch
(D3, D4: MA77)
APC
IC3A: NJM12902V
Q37: DTA144EU
FM IF IC
(IC2:TA31136FN)
CPU
(IC8: HD6473877H)
EEPROM
(IC7: BR24C16FV)
D/A converter
(IC10: M62363FP)
PLL reference oscillator
(X1: CR-659 21.25 MHz)
Crystal filter
FI1, Fl3:FL-298
21.700 MHz
PLL IC
(IC1:LV2105V)
IF amplifier
(Q14: 2SC4406)
( )
( )

3-1
SECTION 3 DISASSEMBLY INSTRUCTIONS
3-1 DISASSEMBLY INSTRUCTION
• REMOVING THE CHASSIS PANEL
1Unscrew 1 nut A, and remove 1 knob B.
2Unscrew 2 screws C.
3Take off the chassis in the direction of the arrow.
4Unplug J6 to separate front panel and chassis.
• REMOVING THE MAIN UNIT
1
2Unsolder 3 points D, and unscrew 1 nut E.
3Unscrew 2 screws F, 2 screws H, and 6 screws G (silver, 2 mm) to separate the chassis and the MAIN unit.
(black, 2 mm) x 2
Front panel
Chassis
J6 (Speaker connector)
B
C
A
H(black, 2 mm) x 2
(silver, 2 mm) x 6
Shield cover
Guide holes
MAIN unit
Chassis
DDG
D
E
G
G
F(black, 2 mm) x 2
Take off the MAIN unit in the direction of the arrow.

3 - 2
3-2 OPTIONAL UNIT INSTALLATIONS
1Remove the option cover.
2Remove the bottom protective paper of spoge.
3Connect the UT-108 optional unit to J5.
4Replace the option cover to the chassis-hole.
SPONGE
Parts name : 1556 sponge
Order No. : 8930013545
Option cover
Option unit
J5

SECTION 4 CIRCUIT DESCRIPTION
4 - 1
4-1 RECEIVER CIRCUITS
4-1-1 ANTENNA SWITCHING CIRCUIT
Received signals passed through the low-pass filter (L1, L2,
C1–C5). The filtered signals are applied to the 1/4 λtype
antenna switching circuit (D1, D2, D8, L15, C76).
The antenna swtiching circuit functions as a low-pass filter
while transmitting. However, its impedance becomes very
high while D2 and D8 are turn ON. Thus transmit signals are
blocked from entering the receiver circuits. The antenna
switching circuit employs a 1/4 λtype diode swtiching sys-
tem. The passed signals are then applied to the RF amplifi-
er circuit.
4-1-2 RF CIRCUIT
The RF circuit amplifies signals within the range of frequen-
cy coverage and filters out-of-band signals.
The signals from the antenna switching circuit are applied to
the limitter (D50), and are then passed through the band-
pass filter (D9, L16, C80). The filtered signals are amplified
at the RF amplifier (Q12), then applied to the 1st mixer cir-
cuit after out-of-band signals are suppressed at the band-
pass filter (D11, D12, L19, C91–C97).
D9, D11, D12 employ varactor diodes that track the band-
pass filters and are controlled by the T1–T3 signals from the
D/A convertor (IC10, pins 2, 3, 10). These diodes tune the
center frequency of an RF passband for wide bandwidth
receiving and good image response rejection.
4-1-3 1ST MIXER AND 1ST IF CIRCUITS
The 1st mixer circuit converts the received signal to a fixed
frequency of the 1st IF signal with a PLL output frequency.
By changing the PLL frequency, only the desired frequency
will pass through two crystal filters at the next stage of the
1st mixer.
The signals from the RF circuit are mixed at the 1st mixer
(Q13) with a 1st LO signal coming from the VCO circuit to
produce a 21.70 MHz 1st IF signal.
The 1st IF signal is applied to two crystal filters (FI1 and FI3)
to suppress out-of-band signals. The filtered 1st IF signal is
applied to the IF amplifier (Q14), then applied to the 2nd
mixer circuit (IC1, pin 16).
4-1-4 2ND IF AND DEMODULATOR CIRCUITS
The 2nd mixer circuit converts the 1st IF signal to a 2nd IF
signal. A double conversion superheterodyne system (which
converts receive signal twice) improves the image rejection
ratio and obtain stable receiver gain.
The 1st IF signal from the IF amplifier is applied to the 2nd
mixer section of the FM IF IC (IC2, pin 16), and is mixed with
the 2nd LO signal to be converted to a 450 kHz 2nd IF sig-
nal.
The FM IF IC contains the 2nd mixer, limiter amplifier, quad-
rature detector and active filter circuits.A21.25 MHz 2nd LO
signal is produced at the PLL circuit.
The 2nd IF signal from the 2nd mixer (IC2, pin 3) passes
through a ceramic filter (FI2) to remove unwanted hetero-
dyned frequencies. It is then amplified at the limiter amplifi-
er (IC2, pin 5) and applied to the quadrature detector (IC2,
pins 10, 11) to demodulate the 2nd IF signal into AF signals.
4-1-5 AF CIRCUIT
The AF amplifier circuit amplifies the demodulated AF sig-
nals to drive a speaker.
AF signals from the FM IF IC (IC2, pin 9) are applied to the
analog swtich (IC4, pin 1) via the AF filter circuit (IC3b, pins
6, 7). The output signals from pin 2, 3 are passed through
the low-pass filter (IC3d, pins 13, 14), and are then applied
to the analog swtich (IC4, pin 9, 10) again. The signals from
the IC4, pin 11 are applied to the AF power amplifier (IC5,
pin 4) after passing through the D/A convertor (IC10, pins
12, 11).
Mixer
16
Limiter
amp.
2nd IF filter
450 kHz PLL IC
IC1
X1
21.25 MHz
IC2 TA31136F
12 1st IF from the IF amplifier (Q14)
"SD" signal to the CPU pin 98
11109
87 5 3
AF signal "DET"
R5
X3
R86
C122 C121
R88R87
R83
"SQLIN" signal from the
D/A convertor (IC10, pin 23)
R82
C112 C113
C116
2
16 1
Active
filter
FI2
Noise
detector
FM
detector
13
"NOIS" signal to the CPU pin 19
RSSI
Noise
comp.
R84
LPF
• 2ND IF AND DEMODULATOR CIRCUITS

4 - 2
The AF signals are applied to the AF power amplifier circuit
(IC5, pin 4) to obtain the specified audio level. The amplified
AF signals, output from pin 10, are applied to the internal
speaker (SP1) via the speaker jack (CHASSIS unit; J3)
when no plug is connected to the jack.
4-1-6 SQUELCH CIRCUIT
Asquelch circuit cuts outAF signals when no RF signals are
received. By detecting noise components in the AF signals,
the squelch switches the analog swtich.
Aportion of theAF signals from the FM IF IC (IC2, pin 9) are
applied to the active filter section (IC2, pin 8) where noise
components are amplified and detected with an internal
noise detector.
The trigger circuit converts the detected signals to a HIGH
or LOW signal and applies this (from pin 13) to the CPU
(IC8, pin 19) as the NOIS signal. When the CPU receives a
HIGH level NOIS signal, the CPU controls the RMUT line to
cut theAF signals at the analog swtich IC (IC4).At the same
time, the AFON line controls the AF regulator circuit (Q15,
Q16) to cut out the VCC power source for the AF power
amplifier (IC5).
4-2 TRANSMITTER CIRCUITS
4-2-1 MICROPHONE AMPLIFIER CIRCUIT
The microphone amplifier circuit amplifies audio signals with
+6 dB/octave pre-emphasis from the microphone to a level
needed for the modulation circuit.
The AF signals from the microphone are applied to the
microphone amplifier circuit (IC3c, pin 10). The amplifiedAF
signals are passed through the low-pass filter circuit (IC3d,
pins 13, 14) via the analog swtich (IC4, pins 4, 3). The fil-
tered AF signals are applied to the modulator circuit after
passing through the analog swtich (IC4, pins 8, 9).
4-2-2 MODULATION CIRCUIT
The modulation circuit modulates the VCO oscillating signal
(RF signal) using the microphone audio signals.
The audio signals (SHIFT) change the reactance of D37 to
modulate an oscillated signal at the VCO (Q50, D38). The
oscillated signal is amplified at the LO (Q6) and buffer (Q4)
amplifiers, then applied to the TX/RX switch circuit (D3, D4).
4-2-3 DRIVE/POWER AMPLIFIER CIRCUITS
The signal from the VCO circuit passes through the TX/RX
swtiching circuit (D3) and is amplified at the pre-drive (Q3),
drive (Q2) and power (Q1) amplifiers to obtain 5.5 W of RF
power (at 7.2 V DC/typical). The amplified signal passes
through the low-pass filter (L4, C278, C287), and then
applied to the antenna swtiching circuit (D1). The signal is
applied to the antenna connector (J1) after being passed
through the low-pass filter (L1, L2, C1–C5).
The bias current of the drive (Q2) and power (Q1) amplifiers
is controlled by the APC circuit to stabilize the output power.
4-2-4 APC CIRCUIT
The APC (Automatic Power Control) circuit (IC3a, Q37) pro-
tects drive and power amplifiers from excessive currents
and selects HIGH or LOW output power.
The output voltage from the power detector circuit (D32,
D33) is applied to the differential amplifier (IC3a, pin 2), and
the “T3”signal from the D/A convertor (IC10, pin 10) is
applied to the other input for reference.
When the driving current increases, the input voltage of the
differential amplifier (IC3a, pin 2) will be increased. In such
cases, the differential amplifier output voltage (pin 1) is
decreased to reduce the drive current.
Q37 is controlled by the TXC signal from the CPU (IC8, pin
55) to select HIGH or LOW output power.
Q1
Power
amp.
Q2
Driver
amp.
IC3a
+
VCC
Q3
Pre drive
RF signal from
PLL IC (IC1) to antenna
T3
TXC Q37
PS5
APC control circuit
Power detector
circuit (D32, D33)
D33 D32
L4, C278, C287
LPF
T5
2
31
•APC CIRCUIT

4 - 3
4-3 PLL CIRCUITS
A PLL circuit provides stable oscillation of the transmit fre-
quency and receive 1st LO frequency. The PLL output com-
pares the phase of the divided VCO frequency to the refer-
ence frequency. The PLL output frequency is controlled by
the divided ratio (N-data) of a programmable divider.
The PLL circuit contains the VCO circuit (Q50, D38). The
oscillated signal is amplified at the LO (Q6) and buffer (Q5)
amplifiers and then applied to the PLL IC (IC1, pin 6).
The PLL IC contains a prescaler, programmable counter,
programmable divider, phase detector, charge pump, etc.
The entered signal is divided at the prescaler and program-
mable counter section by the N-data ratio from the CPU.
The divided signal is detected on phase at the phase detec-
tor using the reference frequency.
If the oscillated signal drifts, its phase changes from the ref-
erence frequency, causing a lock voltage change to com-
pensate for the drift in the oscillated frequency.
A portion of the VCO circuit is amplified at the LO (Q6) and
buffer (Q4) amplifiers and is then applied to the receive 1st
mixer or transmit pre-drive amplifier circuit via the TX/RX
swtiching diode (D3, D4).
4-4 OTHER CIRCUITS
4-4-1 TONE SQUELCH CIRCUIT
A portion of the detected audio signals from the “DET”line
are passed through the tone filter (Q53). The filtered signal
is then applied to the CPU (IC1, pin 94) via the “CTCIN”sig-
nal, and is compared with the programmed tone signal. The
CPU (IC1) outputs control signals as “CTCC”signal to the
AF mute and AF regulator circuits to open the squelch when
a matched tone signal is received.
The programmed subaudible tone signal is output from the
CPU (IC1, pin 91) directly when transmitting with a tone.
Shift register
Prescaler
Phase
detector
Loop
filter
Programmable
counter
Programmable
divider
X1
21.25 MHz
21.25 MHz signal
to the FM IF IC
"DEV" signal from the D/A
convertor (IC10, pin 22)
when transmitting
1
Q50, D38
VCO circuit LO
amp. Buffer
Buffer
2
3
4PLCK
SO
PLST
to transmitter circuit
to 1st mixer circuit
D4
D3
16
96
Q6 Q4
Q5
IC1 LV2105V
VCO SHIFT
R5
Q51, D37
•PLL CIRCUIT
LINE
VCC
CPU5
SW5V
VCO5
PS5
R5
T5
DESCRIPTION
The voltage from the attached battery pack.
Common 5 V converted from the VCC line by the
CPU5 regulator (IC12). The output voltage is
applied to the CPU (IC8), EEPROM (IC7) and
reset IC (IC11).
Common 5 V converted from the VCC line by the
SW5 regulator circuit (Q55, Q57, D39). The out-
put voltage is applied to the T5, R5, PS5 and
VCO5 regulator circuits, D/Aconvertor (IC10, pin
16), etc.
Common 5 V converted from the SW5V line by
the VCO5 regulator circuit (Q11) using the LO
(Q6) and buffer (Q4, Q5) amplifiers. The VCO5
regulator circuit is controlled by the PSVCO line
from the CPU (IC8, pin 62).
Common 5 V converted from the SW5V line by
the PS5 regulator circuit (Q54) using the analog
switch (IC14, pin 14) and APC controller (Q37).
The PS5 regulator circuit is controlled by the
PS5C line from the CPU (IC8, pin 63).
5 V for receiver circuits converted from the
SW5V line by the R5 regulator circuit (Q21)
using the 2nd IF IC (IC2, pin 4), RF (Q12) and IF
(Q14) amplifiers, etc. The R5 regulator circuit is
controlled by the R5C line from the CPU (IC8,
pin 53).
5 V for the transmitter circuit converted from the
SW5V line by the T5 regulator circuit (Q22) using
the pre-drive amplifier (Q3). The T5 regulator cir-
cuit is controlled by the T5C line from the CPU
(IC8, pin 54).
4-5 POWER SUPPLY CIRCUITS
VOLTAGE LINE

Pin Port Description
number name Pin Port Description
number name
4 - 4
4-6 PORT ALLOCATIONS
4-6-1 CPU (IC8)
1
9
11
12
14
16
17
19
21
23–25
26
28–30
32–35
44–47
48
49
50
51
52
53
54
55
DICK
RESET
CSIFT
SCK
SO
CLIN
CLOUT
NOIS
S1
OPV1–
OPV3
CONT
V3–V1
COM4–
COM1
KR3–
KR0
UNLK
RMUT
MMUT
DUSE
PCON
R5C
T5C
TXC
Input port for the clock signal from the
[DIAL] (S801).
Input port for reset signal.
Outputs reference oscillator for the
CPU control signal.
Outputs serial clock signal to the PLL
IC (IC1, pin 2), D/Aconvertor IC (IC10,
pin 7) and optional unit.
Outputs serial signals to the PLL IC
(IC1, pin 3), D/A convertor IC (IC10,
pin 8) and optional unit.
Input port for the cloning signal.
Outputs the cloning signal.
Input port for noise signals (pulse
type).
Input port for the power switch.
Low : While POWER switch is
pushed.
I/O ports for optional unit detection
signals from/to J5.
Outputs LCD contrast control signal.
Input port for the bias signals for the
LCD.
Outputs LCD common signals.
Input port for initial matrix.
Low : While keys are pushing.
Input port for PLL unlock signal from
the PLL IC (IC1, pin 14).
Low : During lock.
•Outputs RX mute control signal.
•Input port for the RX mute signal
from the optional unit.
•Outputs TX mute control signal.
•Input port for the TX mute signal
from the optional unit.
Outputs low-pass filter cut-off frequen-
cy control signal when DTCS is acti-
vated.
Outputs SW5 regulator (Q55, Q57,
Q39) control signal.
Low : While power is ON.
Outputs R5 regulator (Q21) control
signal.
Low : While receiving.
Outputs T5 regulator (Q22) control
signal.
Low : While transmitting.
Outputs APC circuit (Q37, IC3) control
signal.
High : While transmitting.
56
57
58
59
60
61
62
63
64–87
90
91
94
95
96
97
98
99
100
Outputs control signal for the regulator
circuit of AF power amplifier.
High : When squelch is open, etc.
Outputs LCD backlight control signal.
High : Lights ON.
Outputs EEPROM (IC7, pin 6) clock
signal.
I/O port for the data signals from/to the
EEPROM (IC7, pin 5).
I/O port for strobe signals from/to the
D/A convertor IC (IC10, pin 6).
Outputs strobe signals to the PLL IC
(IC1, pin 4).
Outputs VCO5 regulator (Q11) control
signal.
Low : While power is ON.
Outputs PS5 regulator (Q54) control
signal.
Low : While power is ON.
Output LCD driver signals.
Outputs CTCSS and DTCS tone sig-
nal.
Outputs DTMF, BEEP and 1750 Hz
tone signal.
Input port for CTCSS and DTCS
decoded signals.
Input port for the [PTT] switch.
High : While [PTT] switch is pushed.
Input port for the UP/DOWN signal
from the [DIAL] (S801).
Input port for the remote signals from
an optional microphone (HM-75A) via
the [MIC] jack.
Input port for the RSSI detection.
Input port for the PLL lock voltage.
Input port for the transceiver’s internal
tempareture detection.
AFON
LIGT
ESCK
ESDA
DAST
PLST
PSVCO
PS5C
SEG1–
SEG23
CTCC
TONE
CTCIN
PTT
DIUD
REMO
SD
LVIN
TEMP

4 - 5
Pin Port Description
number name
2, 3
10
11
14
15
22
23
T1, T2
T3
VOLOUT
DTC
FC
DEV
SQLIN
Output tunable bandpass filter control
signals.
•Outputs tunable bandpass filter con-
trol signal while receiving.
•Outputs TX power control signal
while transmitting.
Outputs AF volume control signal.
Outputs DTCS’s gradient control sig-
nal.
Outputs reference frequency control
signal to X1.
Outputs transmit devetion control sig-
nal.
Outputs squelch control signal.
4-6-2 D/A CONVERTOR IC (IC10)

5-1 PREPARATION
■REQUIRED TEST EQUIPMENT
5 - 1
SECTION 5 ADJUSTMENT PROCEDURES
EQUIPMENT
DC power supply
GRADE AND RANGE
Output voltage : 7.2 V DC
Current capacity : 5 A or more
EQUIPMENT
Digital multimeter
GRADE AND RANGE
Input impedance : 10 MΩ/V DC or better
Top view
Soldering
DC cable here
—
+
DC POWER
SUPPLY
•DC POWER CABLE CONNECTION

5 - 2
5-2 PLL ADJUSTMENT
PLL LOCK
VOLTAGE 1•Operating frequency : 145.000 MHz
•Receiving
MAIN Connect a digital multi
meter to check point
LV.
2.7 V MAIN L33
ADJUSTMENT ADJUSTMENT CONDITIONS UNIT LOCATION VALUE UNIT ADJUST
MEASUREMENT ADJUSTMENT
L33
PLL lock voltage
adjustment
LV
PLL lock voltage
check point
Bottom view

S.=Surface mount
IC1 1130008350 S.IC LV2105V-TLM
IC2 1110003490 S.IC TA31136FN (D,EL)
IC3 1110005340 S.IC NJM12902V-TE1
IC4 1130008090 S.IC BU4066BCFV-E1
IC5 1110001810 S.IC TA7368F (TP1)
IC7 1130010490 S.IC BR24C16FV-E2
IC8 1140009920 S.IC HD6433876B49H
IC10 1190000350 S.IC M62363FP-650C
IC11 1130009110 S.IC S-80942ANMP-DD6-T2
IC12 1180000800 S.IC S-81350HG-KD-T1
Q1 1560001150 S.FET 2SK3476 (TE12L)
Q2 1560001160 S.FET 2SK3475 (TE12L)
Q3 1530003230 S.TRANSISTOR 2SC5085-Y (TE85R)
Q4 1530003220 S.TRANSISTOR 2SC4406-4-TL
Q5 1530003220 S.TRANSISTOR 2SC4406-4-TL
Q6 1530003220 S.TRANSISTOR 2SC4406-4-TL
Q11 1590001650 S.TRANSISTOR XP4601 (TX)
Q12 1580000710 S.FET 3SK274 (TE85R)
Q13 1580000710 S.FET 3SK274 (TE85R)
Q14 1530003220 S.TRANSISTOR 2SC4406-4-TL
Q15 1520000450 S.TRANSISTOR 2SB1132 T100 Q
Q16 1590001190 S.TRANSISTOR XP6501-(TX) .AB
Q17 1590001920 S.TRANSISTOR UN911F (TX)
Q21 1510000510 S.TRANSISTOR 2SA1576A T106R
Q22 1510000510 S.TRANSISTOR 2SA1576A T106R
Q25 1530002690 S.TRANSISTOR 2SC4116-GR (TE85R)
Q31 1590000660 S.TRANSISTOR DTC144TU T107
Q34 1560000810 S.FET 2SK1069-4-TL
Q37 1590000720 S.TRANSISTOR DTA144EUA T106
Q38 1590000430 S.TRANSISTOR DTC144EUA T106
Q43 1590000430 S.TRANSISTOR DTC144EUA T106
Q50 1590001530 S.TRANSISTOR UMX5 TL
Q51 1590000430 S.TRANSISTOR DTC144EUA T106
Q53 1590001650 S.TRANSISTOR XP4601 (TX)
Q54 1510000510 S.TRANSISTOR 2SA1576A T106R
Q55 1520000450 S.TRANSISTOR 2SB1132 T100 Q
Q56 1590001470 S.TRANSISTOR UN9213 (TX)
Q57 1590001170 S.TRANSISTOR XP1501-(TX) .AB
Q58 1590001650 S.TRANSISTOR XP4601 (TX)
Q59 1530002690 S.TRANSISTOR 2SC4116-GR (TE85R)
D1 1790000620 S.DIODE MA77 (TX)
D2 1790000620 S.DIODE MA77 (TX)
D3 1790000620 S.DIODE MA77 (TX)
D4 1790000620 S.DIODE MA77 (TX)
D7 1750000770 S.VARICAP HVC376BTRF
D8 1790000620 S.DIODE MA77 (TX)
D9 1720000780 S.VARICAP HVU350B TRF
D11 1720000780 S.VARICAP HVU350B TRF
D12 1720000780 S.VARICAP HVU350B TRF
D27 1790001670 S.DIODE RB706F-40T106
D32 1790001670 S.DIODE RB706F-40T106
D33 1790001670 S.DIODE RB706F-40T106
D34 1790000950 S.ZENER MA8056-M (TX)
D37 1790001260 S.DIODE MA2S077-(TX)
D38 1720000780 S.VARICAP HVU350B TRF
D39 1790001250 S.DIODE MA2S111-(TX)
D40 1790001250 S.DIODE MA2S111-(TX)
D41 1790001250 S.DIODE MA2S111-(TX)
D42 1790001250 S.DIODE MA2S111-(TX)
D43 1790001250 S.DIODE MA2S111-(TX)
D44 1790001250 S.DIODE MA2S111-(TX)
D45 1790001250 S.DIODE MA2S111-(TX) [USA] only
D46 1790001250 S.DIODE MA2S111-(TX) [USA] only
D48 1790001250 S.DIODE MA2S111-(TX) [USA] only
D50 1790000660 S.DIODE MA728 (TX)
FI1 2010002330 MONOLITH FL-298 (21.700 MHz)
FI2 2020001490 S.CERAMIC SFPC450E-TC01
FI3 2010002330 MONOLITH FL-298 (21.700 MHz)
X1 6050010800 S.XTAL CR-659 (21.25 MHz)
X2 6050010870 S.XTAL CR-663 (9.200 MHz)
X3 6070000210
S.DISCRIMINATOR
CDBCA450CX24
L1 6200008260 S.COIL 0.30-1.7-8TL 60N
L2 6200008280 S.COIL 0.30-1.7-7TL 50N
L4 6200008280 S.COIL 0.30-1.7-7TL 50N
L5 6200008250 S.COIL 0.30-0.9-7TL 21N
L6 6200007710 S.COIL LQN21A 27NJ04
L7 6200005260 S.COIL LL1608-F68NK
L8 6200006980 S.COIL ELJRE R10G-F
L14 6200007000 S.COIL ELJRE 82NG-F
L15 6200008170 S.COIL 0.35-1.6-8TL 54N
L16 6200008260 S.COIL 0.30-1.7-8TL 60N
L18 6200008090 S.COIL LQN21A 68NJ04
L19 6200002380 S.COIL LQN 1A 56NJ04
L20 6200003280 S.COIL NL 252018T-2R2J
L21 6200005740 S.COIL ELJRE 47NG-F
L24 6200003090 S.COIL NL 322522T-2R7J-3
L26 6200003590 S.COIL EXCCL3225U1
L29 6200006670 S.COIL ELJRE 68NG-F
L32 6200008700 S.COIL 0.30-0.9-6TR 17.5N
L33 6130002480 S.COIL LB-277
L34 6200003710 S.COIL NL 252018T-2R7J
L36 6200004920 S.COIL MLF1608A 2R2K-T
R1 7030003670 S.RESISTOR ERJ3GEYJ 823 V (82 kΩ)
R2 7030003480 S.RESISTOR ERJ3GEYJ 222 V (2.2 kΩ)
R3 7030003480 S.RESISTOR ERJ3GEYJ 222 V (2.2 kΩ)
R5 7030003240 S.RESISTOR ERJ3GEYJ 220 V (22 Ω)
R7 7030003360 S.RESISTOR ERJ3GEYJ 221 V (220 Ω)
R10 7030003260 S.RESISTOR ERJ3GEYJ 330 V (33 Ω)
R11 7030003500 S.RESISTOR ERJ3GEYJ 332 V (3.3 kΩ)
R12 7030003500 S.RESISTOR ERJ3GEYJ 332 V (3.3 kΩ)
R13 7030003260 S.RESISTOR ERJ3GEYJ 330 V (33 Ω)
R14 7030003520 S.RESISTOR ERJ3GEYJ 472 V (4.7 kΩ)
R15 7030003320 S.RESISTOR ERJ3GEYJ 101 V (100 Ω)
R16 7030003220 S.RESISTOR ERJ3GEYJ 150 V (15 Ω)
R17 7030003440 S.RESISTOR ERJ3GEYJ 102 V (1 kΩ)
R18 7030003630 S.RESISTOR ERJ3GEYJ 393 V (39 kΩ)
R19 7030003380 S.RESISTOR ERJ3GEYJ 331 V (330 Ω)
R20 7030003710 S.RESISTOR ERJ3GEYJ 184 V (180 kΩ)
R21 7030003440 S.RESISTOR ERJ3GEYJ 102 V (1 kΩ)
R22 7030003660 S.RESISTOR ERJ3GEYJ 683 V (68 kΩ)
R23 7030003420 S.RESISTOR ERJ3GEYJ 681 V (680 Ω)
R30 7030003520 S.RESISTOR ERJ3GEYJ 472 V (4.7 kΩ)
R32 7030003390 S.RESISTOR ERJ3GEYJ 391 V (390 Ω)
R33 7030003380 S.RESISTOR ERJ3GEYJ 331 V (330 Ω)
R35 7030003320 S.RESISTOR ERJ3GEYJ 101 V (100 Ω)
R41 7030003320 S.RESISTOR ERJ3GEYJ 101 V (100 Ω)
R44 7030003560 S.RESISTOR ERJ3GEYJ 103 V (10 kΩ)
R48 7030003560 S.RESISTOR ERJ3GEYJ 103 V (10 kΩ)
R49 7030003640 S.RESISTOR ERJ3GEYJ 473 V (47 kΩ)
R50 7030003760 S.RESISTOR ERJ3GEYJ 474 V (470 kΩ)
R52 7030003680 S.RESISTOR ERJ3GEYJ 104 V (100 kΩ)
R53 7030003560 S.RESISTOR ERJ3GEYJ 103 V (10 kΩ)
R54 7030003710 S.RESISTOR ERJ3GEYJ 184 V (180 kΩ)
R57 7030003680 S.RESISTOR ERJ3GEYJ 104 V (100 kΩ)
R58 7030003680 S.RESISTOR ERJ3GEYJ 104 V (100 kΩ)
R59 7030003330 S.RESISTOR ERJ3GEYJ 121 V (120 Ω)
R61 7030003280 S.RESISTOR ERJ3GEYJ 470 V (47 Ω)
R64 7030003680 S.RESISTOR ERJ3GEYJ 104 V (100 kΩ)
R65 7030003680 S.RESISTOR ERJ3GEYJ 104 V (100 kΩ)
R66 7030003680 S.RESISTOR ERJ3GEYJ 104 V (100 kΩ)
R67 7030003680 S.RESISTOR ERJ3GEYJ 104 V (100 kΩ)
R68 7030003520 S.RESISTOR ERJ3GEYJ 472 V (4.7 kΩ)
R69 7030003320 S.RESISTOR ERJ3GEYJ 101 V (100 Ω)
R70 7030003680 S.RESISTOR ERJ3GEYJ 104 V (100 kΩ)
R72 7030003560 S.RESISTOR ERJ3GEYJ 103 V (10 kΩ)
R75 7030003360 S.RESISTOR ERJ3GEYJ 221 V (220 Ω)
R77 7030003320 S.RESISTOR ERJ3GEYJ 101 V (100 Ω)
R79 7030003440 S.RESISTOR ERJ3GEYJ 102 V (1 kΩ)
R80 7030003670 S.RESISTOR ERJ3GEYJ 823 V (82 kΩ)
6 - 1
REF ORDER DESCRIPTION
NO. NO.
[MAIN UNIT] REF ORDER DESCRIPTION
NO. NO.
[MAIN UNIT]
SECTION 6 PARTS LIST

S.=Surface mount
R81 7030003400 S.RESISTOR ERJ3GEYJ 471 V (470 Ω)
R82 7030003470 S.RESISTOR ERJ3GEYJ 182 V (1.8 kΩ)
R83 7030003400 S.RESISTOR ERJ3GEYJ 471 V (470 Ω)
R84 7030003390 S.RESISTOR ERJ3GEYJ 391 V (390 Ω)
R85 7030003460 S.RESISTOR ERJ3GEYJ 152 V (1.5 kΩ)
R86 7030003640 S.RESISTOR ERJ3GEYJ 473 V (47 kΩ)
R87 7030003480 S.RESISTOR ERJ3GEYJ 222 V (2.2 kΩ)
R88 7030003620 S.RESISTOR ERJ3GEYJ 333 V (33 kΩ)
R93 7030003610 S.RESISTOR ERJ3GEYJ 273 V (27 kΩ)
R94 7030003800 S.RESISTOR ERJ3GEYJ 105 V (1 MΩ)
R95 7030003820 S.RESISTOR ERJ3GEYJ 155 V (1.5 MΩ)
R97 7030003720 S.RESISTOR ERJ3GEYJ 224 V (220 kΩ)
R98 7030003740 S.RESISTOR ERJ3GEYJ 334 V (330 kΩ)
R99 7030003690 S.RESISTOR ERJ3GEYJ 124 V (120 kΩ)
R100 7030003590 S.RESISTOR ERJ3GEYJ 183 V (18 kΩ)
R101 7030003800 S.RESISTOR ERJ3GEYJ 105 V (1 MΩ)
R102 7030003200 S.RESISTOR ERJ3GEYJ 100 V (10 Ω)
R103 7030003570 S.RESISTOR ERJ3GEYJ 123 V (12 kΩ)
R104 7030003680 S.RESISTOR ERJ3GEYJ 104 V (100 kΩ)
R105 7030003400 S.RESISTOR ERJ3GEYJ 471 V (470 Ω)
R107 7030003700 S.RESISTOR ERJ3GEYJ 154 V (150 kΩ)
R108 7030003700 S.RESISTOR ERJ3GEYJ 154 V (150 kΩ)
R112 7030003800 S.RESISTOR ERJ3GEYJ 105 V (1 MΩ)
R113 7030003660 S.RESISTOR ERJ3GEYJ 683 V (68 kΩ)
R114 7030003590 S.RESISTOR ERJ3GEYJ 183 V (18 kΩ)
R115 7030003690 S.RESISTOR ERJ3GEYJ 124 V (120 kΩ)
R117 7030003460 S.RESISTOR ERJ3GEYJ 152 V (1.5 kΩ)
R120 7030003640 S.RESISTOR ERJ3GEYJ 473 V (47 kΩ)
R121 7030003440 S.RESISTOR ERJ3GEYJ 102 V (1 kΩ)
R122 7030003490 S.RESISTOR ERJ3GEYJ 272 V (2.7 kΩ)
R123 7030003540 S.RESISTOR ERJ3GEYJ 682 V (6.8 kΩ)
R126 7030003640 S.RESISTOR ERJ3GEYJ 473 V (47 kΩ)
R127 7030003260 S.RESISTOR ERJ3GEYJ 330 V (33 Ω)
R128 7030003200 S.RESISTOR ERJ3GEYJ 100 V (10 Ω)
R130 7030003680 S.RESISTOR ERJ3GEYJ 104 V (100 kΩ)
R131 7030003400 S.RESISTOR ERJ3GEYJ 471 V (470 Ω)
R132 7030003400 S.RESISTOR ERJ3GEYJ 471 V (470 Ω)
R136 7030003320 S.RESISTOR ERJ3GEYJ 101 V (100 Ω)
R137 7030003320 S.RESISTOR ERJ3GEYJ 101 V (100 Ω)
R139 7030003560 S.RESISTOR ERJ3GEYJ 103 V (10 kΩ)
R141 7030003520 S.RESISTOR ERJ3GEYJ 472 V (4.7 kΩ)
R144 7030003600 S.RESISTOR ERJ3GEYJ 223 V (22 kΩ)
R145 7030003760 S.RESISTOR ERJ3GEYJ 474 V (470 kΩ)
R148 7030003680 S.RESISTOR ERJ3GEYJ 104 V (100 kΩ)
R150 7030003400 S.RESISTOR ERJ3GEYJ 471 V (470 Ω)
R155 7030003320 S.RESISTOR ERJ3GEYJ 101 V (100 Ω)
R159 7030003680 S.RESISTOR ERJ3GEYJ 104 V (100 kΩ)
R160 7030003340 S.RESISTOR ERJ3GEYJ 151 V (150 Ω)
R161 7030003600 S.RESISTOR ERJ3GEYJ 223 V (22 kΩ)
R162 7030003600 S.RESISTOR ERJ3GEYJ 223 V (22 kΩ)
R163 7030003480 S.RESISTOR ERJ3GEYJ 222 V (2.2 kΩ)
R164 7030003680 S.RESISTOR ERJ3GEYJ 104 V (100 kΩ)
R169 7030003630 S.RESISTOR ERJ3GEYJ 393 V (39 kΩ)
R170 7030003560 S.RESISTOR ERJ3GEYJ 103 V (10 kΩ)
R174 7030003580 S.RESISTOR ERJ3GEYJ 153 V (15 kΩ)
R176 7030003510 S.RESISTOR ERJ3GEYJ 392 V (3.9 kΩ)
R177 7030003440 S.RESISTOR ERJ3GEYJ 102 V (1 kΩ)
R178 7030003630 S.RESISTOR ERJ3GEYJ 393 V (39 kΩ)
R181 7030003940 S.RESISTOR ERJ3GEYF 104 V (100 kΩ)
R182 7510001280 S.THERMISTOR NTCCM20124AG473J-T
R184 7030003560 S.RESISTOR ERJ3GEYJ 103 V (10 kΩ)
R185 7030003440 S.RESISTOR ERJ3GEYJ 102 V (1 kΩ)
R186 7030003640 S.RESISTOR ERJ3GEYJ 473 V (47 kΩ)
R187 7030003680 S.RESISTOR ERJ3GEYJ 104 V (100 kΩ)
R193 7030003650 S.RESISTOR ERJ3GEYJ 563 V (56 kΩ)
R194 7030003650 S.RESISTOR ERJ3GEYJ 563 V (56 kΩ)
R195 7030003650 S.RESISTOR ERJ3GEYJ 563 V (56 kΩ)
R196 7030003670 S.RESISTOR ERJ3GEYJ 823 V (82 kΩ)
R204 7030003500 S.RESISTOR ERJ3GEYJ 332 V (3.3 kΩ)
R205 7030003460 S.RESISTOR ERJ3GEYJ 152 V (1.5 kΩ)
R210 7030003510 S.RESISTOR ERJ3GEYJ 392 V (3.9 kΩ)
R222 7030003590 S.RESISTOR ERJ3GEYJ 183 V (18 kΩ)
R224 7030003690 S.RESISTOR ERJ3GEYJ 124 V (120 kΩ)
R225 7030003680 S.RESISTOR ERJ3GEYJ 104 V (100 kΩ)
R226 7410000950 S.ARRAY EXB-V8V 102JV
R227 7030003570 S.RESISTOR ERJ3GEYJ 123 V (12 kΩ)
R228 7030003580 S.RESISTOR ERJ3GEYJ 153 V (15 kΩ)
R232 7030003440 S.RESISTOR ERJ3GEYJ 102 V (1 kΩ)
R235 7030003840 S.RESISTOR ERJ3GEYJ 225 V (2.2 MΩ)
R236 7410000950 S.ARRAY EXB-V8V 102JV
R237 7410000950 S.ARRAY EXB-V8V 102JV
R238 7410000950 S.ARRAY EXB-V8V 102JV
R239 7030003440 S.RESISTOR ERJ3GEYJ 102 V (1 kΩ)
R240 7030003440 S.RESISTOR ERJ3GEYJ 102 V (1 kΩ)
R241 7030003800 S.RESISTOR ERJ3GEYJ 105 V (1 MΩ)
R242 7030003800 S.RESISTOR ERJ3GEYJ 105 V (1 MΩ)
R243 7030003800 S.RESISTOR ERJ3GEYJ 105 V (1 MΩ)
R244 7030003680 S.RESISTOR ERJ3GEYJ 104 V (100 kΩ)
R245 7030003680 S.RESISTOR ERJ3GEYJ 104 V (100 kΩ)
R246 7030003680 S.RESISTOR ERJ3GEYJ 104 V (100 kΩ)
R251 7030003740 S.RESISTOR ERJ3GEYJ 334 V (330 kΩ)
R252 7030003560 S.RESISTOR ERJ3GEYJ 103 V (10 kΩ)
R257 7030004050 S.RESISTOR ERJ3GEYJ 1R0 V (1 Ω)
R259 7030003560 S.RESISTOR ERJ3GEYJ 103 V (10 kΩ)
R260 7030003560 S.RESISTOR ERJ3GEYJ 103 V (10 kΩ)
R261 7030003640 S.RESISTOR ERJ3GEYJ 473 V (47 kΩ)
R262 7030003420 S.RESISTOR ERJ3GEYJ 681 V (680 Ω)
R264 7030003660 S.RESISTOR ERJ3GEYJ 683 V (68 kΩ)
R266 7030003580 S.RESISTOR ERJ3GEYJ 153 V (15 kΩ)
R300 7030003560 S.RESISTOR ERJ3GEYJ 103 V (10 kΩ)
R301 7030003420 S.RESISTOR ERJ3GEYJ 681 V (680 Ω)
R302 7030003560 S.RESISTOR ERJ3GEYJ 103 V (10 kΩ)
R303 7030003360 S.RESISTOR ERJ3GEYJ 221 V (220 Ω)
R304 7030003360 S.RESISTOR ERJ3GEYJ 221 V (220 Ω)
R305 7030003320 S.RESISTOR ERJ3GEYJ 101 V (100 Ω)
R306 7030003380 S.RESISTOR ERJ3GEYJ 331 V (330 Ω)
R307 7030003390 S.RESISTOR ERJ3GEYJ 391 V (390 Ω)
R308 7030003640 S.RESISTOR ERJ3GEYJ 473 V (47 kΩ)
R309 7030003550 S.RESISTOR ERJ3GEYJ 822 V (8.2 kΩ)
R310 7030003640 S.RESISTOR ERJ3GEYJ 473 V (47 kΩ)
R311 7030003640 S.RESISTOR ERJ3GEYJ 473 V (47 kΩ)
R313 7030003440 S.RESISTOR ERJ3GEYJ 102 V (1 kΩ)
R314 7030003520 S.RESISTOR ERJ3GEYJ 472 V (4.7 kΩ)
R315 7030003550 S.RESISTOR ERJ3GEYJ 822 V (8.2 kΩ)
R316 7030003520 S.RESISTOR ERJ3GEYJ 472 V (4.7 kΩ)
R318 7030003660 S.RESISTOR ERJ3GEYJ 683 V (68 kΩ)
R319 7030003660 S.RESISTOR ERJ3GEYJ 683 V (68 kΩ)
R320 7030003580 S.RESISTOR ERJ3GEYJ 153 V (15 kΩ)
R321 7030003560 S.RESISTOR ERJ3GEYJ 103 V (10 kΩ)
R323 7030003560 S.RESISTOR ERJ3GEYJ 103 V (10 kΩ)
R324 7030003450 S.RESISTOR ERJ3GEYJ 122 V (1.2 kΩ)
R325 7030003660 S.RESISTOR ERJ3GEYJ 683 V (68 kΩ)
R326 7030003660 S.RESISTOR ERJ3GEYJ 683 V (68 kΩ)
R327 7030003680 S.RESISTOR ERJ3GEYJ 104 V (100 kΩ)
R328 7030003680 S.RESISTOR ERJ3GEYJ 104 V (100 kΩ)
R329 7030003640 S.RESISTOR ERJ3GEYJ 473 V (47 kΩ)
R330 7030003560 S.RESISTOR ERJ3GEYJ 103 V (10 kΩ)
R331 7030003560 S.RESISTOR ERJ3GEYJ 103 V (10 kΩ)
R332 7030003520 S.RESISTOR ERJ3GEYJ 472 V (4.7 kΩ)
R333 7030003800 S.RESISTOR ERJ3GEYJ 105 V (1 MΩ)
R334 7030003800 S.RESISTOR ERJ3GEYJ 105 V (1 MΩ)
R335 7030003800 S.RESISTOR ERJ3GEYJ 105 V (1 MΩ)
R336 7030003680 S.RESISTOR ERJ3GEYJ 104 V (100 kΩ)
R337 7030003830 S.RESISTOR ERJ3GEYJ 185 V (1.8 MΩ)
R340 7030003600 S.RESISTOR ERJ3GEYJ 223 V (22 kΩ)
R341 7030003620 S.RESISTOR ERJ3GEYJ 333 V (33 kΩ)
R346 7030003680 S.RESISTOR ERJ3GEYJ 104 V (100 kΩ)
R348 7030003440 S.RESISTOR ERJ3GEYJ 102 V (1 kΩ)
R349 7030003680 S.RESISTOR ERJ3GEYJ 104 V (100 kΩ)
[USA] only
R350 7030003800 S.RESISTOR ERJ3GEYJ 105 V (1 MΩ)
R351 7030003310 S.RESISTOR ERJ3GEYJ 820 V (82 Ω)
R352 7030003730 S.RESISTOR ERJ3GEYJ 274 V (270 kΩ)
R353 7030003560 S.RESISTOR ERJ3GEYJ 103 V (10 kΩ)
R354 7030003480 S.RESISTOR ERJ3GEYJ 222 V (2.2 kΩ)
R355 7030003720 S.RESISTOR ERJ3GEYJ 224 V (220 kΩ)
R356 7030003320 S.RESISTOR ERJ3GEYJ 101 V (100 Ω)
R357 7030003620 S.RESISTOR ERJ3GEYJ 333 V (33 kΩ)
R358 7030003620 S.RESISTOR ERJ3GEYJ 333 V (33 kΩ)
R359 7030003800 S.RESISTOR ERJ3GEYJ 105 V (1 MΩ)
R360 7030003490 S.RESISTOR ERJ3GEYJ 272 V (2.7 kΩ)
R361 7030003800 S.RESISTOR ERJ3GEYJ 105 V (1 MΩ)
R362 7030003560 S.RESISTOR ERJ3GEYJ 103 V (10 kΩ)
C1 4030007020 S.CERAMIC C1608 CH 1H 120J-T-A
C2 4030009550 S.CERAMIC C1608 CH 1H 2R5B-T-A
C3 4030007060 S.CERAMIC C1608 CH 1H 270J-T-A
C4 4030006970 S.CERAMIC C1608 CH 1H 060D-T-A
C5 4030007050 S.CERAMIC C1608 CH 1H 220J-T-A
C8 4030006860 S.CERAMIC C1608 JB 1H 102K-T-A
C10 4030006860 S.CERAMIC C1608 JB 1H 102K-T-A
6 - 2
REF ORDER DESCRIPTION
NO. NO.
[MAIN UNIT] REF ORDER DESCRIPTION
NO. NO.
[MAIN UNIT]

S.=Surface mount
C13 4030006860 S.CERAMIC C1608 JB 1H 102K-T-A
C14 4030006900 S.CERAMIC C1608 JB 1E 103K-T-A
C15 4030007150 S.CERAMIC C1608 CH 1H 151J-T-A
C17 4030006860 S.CERAMIC C1608 JB 1H 102K-T-A
C18 4030006860 S.CERAMIC C1608 JB 1H 102K-T-A
C19 4030006900 S.CERAMIC C1608 JB 1E 103K-T-A
C20 4030006860 S.CERAMIC C1608 JB 1H 102K-T-A
C21 4550006480 S.TANTALUM TEMSVA 1C 475M-8L
C22 4030007130 S.CERAMIC C1608 CH 1H 101J-T-A
C23 4030006860 S.CERAMIC C1608 JB 1H 102K-T-A
C24 4030006860 S.CERAMIC C1608 JB 1H 102K-T-A
C25 4030006860 S.CERAMIC C1608 JB 1H 102K-T-A
C26 4030006860 S.CERAMIC C1608 JB 1H 102K-T-A
C27 4030007040 S.CERAMIC C1608 CH 1H 180J-T-A
C28 4030007020 S.CERAMIC C1608 CH 1H 120J-T-A
C29 4030006860 S.CERAMIC C1608 JB 1H 102K-T-A
C30 4030007050 S.CERAMIC C1608 CH 1H 220J-T-A
C31 4030006960 S.CERAMIC C1608 CH 1H 050C-T-A
C32 4030006860 S.CERAMIC C1608 JB 1H 102K-T-A
C33 4030006860 S.CERAMIC C1608 JB 1H 102K-T-A
C47 4550006260 S.TANTALUM TESVSP 1C 474M-8R
C48 4550005980 S.TANTALUM TEMSVA 1A 475M-8L
C50 4550003080 S.TANTALUM TEMSVA 1A 335M-8L
C52 4030007030 S.CERAMIC C1608 CH 1H 150J-T-A
C54 4030006860 S.CERAMIC C1608 JB 1H 102K-T-A
C55 4030006900 S.CERAMIC C1608 JB 1E 103K-T-A
C60 4030006860 S.CERAMIC C1608 JB 1H 102K-T-A
C61 4030007020 S.CERAMIC C1608 CH 1H 120J-T-A
C62 4030007000 S.CERAMIC C1608 CH 1H 090D-T-A
C64 4030006990 S.CERAMIC C1608 CH 1H 080D-T-A
C69 4030007110 S.CERAMIC C1608 CH 1H 680J-T-A
C70 4030006860 S.CERAMIC C1608 JB 1H 102K-T-A
C72 4550000460 S.TANTALUM TESVA 1C 105M1-8L
C73 4030011600 S.CERAMIC C1608 JB 1C 104KT-N
C75 4030011600 S.CERAMIC C1608 JB 1C 104KT-N
C76 4030007040 S.CERAMIC C1608 CH 1H 180J-T-A
C79 4030006960 S.CERAMIC C1608 CH 1H 050C-T-A
C80 4030009510 S.CERAMIC C1608 CH 1H 010B-T-A
C81 4030007130 S.CERAMIC C1608 CH 1H 101J-T-A
C82 4030006860 S.CERAMIC C1608 JB 1H 102K-T-A
C87 4030006900 S.CERAMIC C1608 JB 1E 103K-T-A
C88 4030006860 S.CERAMIC C1608 JB 1H 102K-T-A
C89 4030006860 S.CERAMIC C1608 JB 1H 102K-T-A
C90 4030006860 S.CERAMIC C1608 JB 1H 102K-T-A
C91 4030006930 S.CERAMIC C1608 CH 1H 020C-T-A
C92 4030007130 S.CERAMIC C1608 CH 1H 101J-T-A
C93 4030006860 S.CERAMIC C1608 JB 1H 102K-T-A
C94 4030009500 S.CERAMIC C1608 CH 1H 0R5B-T-A
C95 4030006860 S.CERAMIC C1608 JB 1H 102K-T-A
C96 4030007130 S.CERAMIC C1608 CH 1H 101J-T-A
C97 4030006960 S.CERAMIC C1608 CH 1H 050C-T-A
C98 4030006960 S.CERAMIC C1608 CH 1H 050C-T-A
C99 4030006860 S.CERAMIC C1608 JB 1H 102K-T-A
C100 4030007080 S.CERAMIC C1608 CH 1H 390J-T-A
C101 4030007100 S.CERAMIC C1608 CH 1H 560J-T-A
C102 4030007100 S.CERAMIC C1608 CH 1H 560J-T-A
C104 4030006860 S.CERAMIC C1608 JB 1H 102K-T-A
C105 4030006900 S.CERAMIC C1608 JB 1E 103K-T-A
C106 4030007050 S.CERAMIC C1608 CH 1H 220J-T-A
C107 4030006860 S.CERAMIC C1608 JB 1H 102K-T-A
C108 4030006900 S.CERAMIC C1608 JB 1E 103K-T-A
C110 4030006960 S.CERAMIC C1608 CH 1H 050C-T-A
C111 4030006900 S.CERAMIC C1608 JB 1E 103K-T-A
C112 4030006860 S.CERAMIC C1608 JB 1H 102K-T-A
C113 4030006860 S.CERAMIC C1608 JB 1H 102K-T-A
C114 4030008900 S.CERAMIC C1608 JB 1C 333K-T-A
C115 4030006900 S.CERAMIC C1608 JB 1E 103K-T-A
C116 4030007120 S.CERAMIC C1608 CH 1H 820J-T-A
C117 4030006860 S.CERAMIC C1608 JB 1H 102K-T-A
C118 4030006900 S.CERAMIC C1608 JB 1E 103K-T-A
C119 4030008680 S.CERAMIC C2012 JF 1C 105Z-T-A
C120 4030011600 S.CERAMIC C1608 JB 1C 104KT-N
C121 4030007170 S.CERAMIC C1608 CH 1H 221J-T-A
C122 4030007170 S.CERAMIC C1608 CH 1H 221J-T-A
C123 4030006860 S.CERAMIC C1608 JB 1H 102K-T-A
C124 4030006900 S.CERAMIC C1608 JB 1E 103K-T-A
C125 4030006870 S.CERAMIC C1608 JB 1H 222K-T-A
C126 4030008470 S.CERAMIC C1608 JB 1H 272K-T-A
C128 4030011600 S.CERAMIC C1608 JB 1C 104KT-N
C129 4550002960 S.TANTALUM TESVA 1C 155M1-8L
C131 4030006900 S.CERAMIC C1608 JB 1E 103K-T-A
C132 4030008770 S.CERAMIC C1608 JB 1H 562K-T-A
C133 4030011600 S.CERAMIC C1608 JB 1C 104KT-N
C134 4030007170 S.CERAMIC C1608 CH 1H 221J-T-A
C135 4030011280 S.CERAMIC C1608 CH 1H 271J-T-A
C136 4030008770 S.CERAMIC C1608 JB 1H 562K-T-A
C137 4030008900 S.CERAMIC C1608 JB 1C 333K-T-A
C138 4030006860 S.CERAMIC C1608 JB 1H 102K-T-A
C139 4030008680 S.CERAMIC C2012 JF 1C 105Z-T-A
C140 4030011600 S.CERAMIC C1608 JB 1C 104KT-N
C144 4030006860 S.CERAMIC C1608 JB 1H 102K-T-A
C145 4510004630
S.ELECTROLYTIC
ECEV1CA100SR
C147 4030008920 S.CERAMIC C1608 JB 1C 473K-T-A
C149 4030008880 S.CERAMIC C1608 JB 1C 223K-T-A
C150 4550006050 S.TANTALUM TEMSVA 0J 106M8L
C151 4030007090 S.CERAMIC C1608 CH 1H 470J-T-A
C152 4030008920 S.CERAMIC C1608 JB 1C 473K-T-A
C153 4510006940
S.ELECTROLYTIC
EEVFC0J101P
C154 4550006250 S.TANTALUM TEMSVA 1A 106M-8L
C161 4030006900 S.CERAMIC C1608 JB 1E 103K-T-A
C162 4030006900 S.CERAMIC C1608 JB 1E 103K-T-A
C163 4030006860 S.CERAMIC C1608 JB 1H 102K-T-A
C164 4030006860 S.CERAMIC C1608 JB 1H 102K-T-A
C165 4030006860 S.CERAMIC C1608 JB 1H 102K-T-A
C166 4030006860 S.CERAMIC C1608 JB 1H 102K-T-A
C167 4030007090 S.CERAMIC C1608 CH 1H 470J-T-A
C168 4030006860 S.CERAMIC C1608 JB 1H 102K-T-A
C169 4030006860 S.CERAMIC C1608 JB 1H 102K-T-A
C171 4030011600 S.CERAMIC C1608 JB 1C 104KT-N
C173 4510006220
S.ELECTROLYTIC
ECEV1CA101UP
C174 4510005430
S.ELECTROLYTIC
ECEV0JA220SR
C179 4030006900 S.CERAMIC C1608 JB 1E 103K-T-A
C193 4030006990 S.CERAMIC C1608 CH 1H 080D-T-A
C194 4030007030 S.CERAMIC C1608 CH 1H 150J-T-A
C195 4030007100 S.CERAMIC C1608 CH 1H 560J-T-A
C197 4030011600 S.CERAMIC C1608 JB 1C 104KT-N
C199 4030011600 S.CERAMIC C1608 JB 1C 104KT-N
C204 4030006860 S.CERAMIC C1608 JB 1H 102K-T-A
C205 4030006860 S.CERAMIC C1608 JB 1H 102K-T-A
C209 4030011600 S.CERAMIC C1608 JB 1C 104KT-N
C212 4030006900 S.CERAMIC C1608 JB 1E 103K-T-A
C213 4550002890 S.TANTALUM TESVA 1A 225M1-8L
C214 4030008900 S.CERAMIC C1608 JB 1C 333K-T-A
C216 4030008920 S.CERAMIC C1608 JB 1C 473K-T-A
C217 4030011600 S.CERAMIC C1608 JB 1C 104KT-N
C219 4030006900 S.CERAMIC C1608 JB 1E 103K-T-A
C223 4030006900 S.CERAMIC C1608 JB 1E 103K-T-A
C230 4030008890 S.CERAMIC C1608 JB 1C 273K-T-A
C232 4030008630 S.CERAMIC C1608 JF 1C 104Z-T-A
C233 4030006860 S.CERAMIC C1608 JB 1H 102K-T-A
C234 4030006860 S.CERAMIC C1608 JB 1H 102K-T-A
C236 4030006900 S.CERAMIC C1608 JB 1E 103K-T-A
C243 4030006860 S.CERAMIC C1608 JB 1H 102K-T-A
C244 4030006900 S.CERAMIC C1608 JB 1E 103K-T-A
C245 4030006900 S.CERAMIC C1608 JB 1E 103K-T-A
C249 4030006900 S.CERAMIC C1608 JB 1E 103K-T-A
C251 4030006860 S.CERAMIC C1608 JB 1H 102K-T-A
C252 4030006860 S.CERAMIC C1608 JB 1H 102K-T-A
C277 4030006970 S.CERAMIC C1608 CH 1H 060D-T-A
C278 4030007050 S.CERAMIC C1608 CH 1H 220J-T-A
C281 4030006860 S.CERAMIC C1608 JB 1H 102K-T-A
C282 4030006860 S.CERAMIC C1608 JB 1H 102K-T-A
C283 4030006870 S.CERAMIC C1608 JB 1H 222K-T-A
C284 4030007070 S.CERAMIC C1608 CH 1H 330J-T-A
C285 4030007040 S.CERAMIC C1608 CH 1H 180J-T-A
C287 4030007050 S.CERAMIC C1608 CH 1H 220J-T-A
C288 4030006860 S.CERAMIC C1608 JB 1H 102K-T-A
C289 4030006860 S.CERAMIC C1608 JB 1H 102K-T-A
C290 4030006860 S.CERAMIC C1608 JB 1H 102K-T-A
C293 4030011600 S.CERAMIC C1608 JB 1C 104KT-N
C295 4030006860 S.CERAMIC C1608 JB 1H 102K-T-A
C296 4030006860 S.CERAMIC C1608 JB 1H 102K-T-A
C297 4030006860 S.CERAMIC C1608 JB 1H 102K-T-A
C298 4550005980 S.TANTALUM TEMSVA 1A 475M-8L
C299 4030006850 S.CERAMIC C1608 JB 1H 471K-T-A
C300 4030006860 S.CERAMIC C1608 JB 1H 102K-T-A
C301 4030006860 S.CERAMIC C1608 JB 1H 102K-T-A
C303 4030006860 S.CERAMIC C1608 JB 1H 102K-T-A
C304 4030008920 S.CERAMIC C1608 JB 1C 473K-T-A
C305 4030006850 S.CERAMIC C1608 JB 1H 471K-T-A
C356 4030006860 S.CERAMIC C1608 JB 1H 102K-T-A
C357 4030006860 S.CERAMIC C1608 JB 1H 102K-T-A
C358 4030006860 S.CERAMIC C1608 JB 1H 102K-T-A
C360 4030006860 S.CERAMIC C1608 JB 1H 102K-T-A
6 - 3
REF ORDER DESCRIPTION
NO. NO.
[MAIN UNIT] REF ORDER DESCRIPTION
NO. NO.
[MAIN UNIT]

S.=Surface mount
C361 4030006860 S.CERAMIC C1608 JB 1H 102K-T-A
C363 4030006860 S.CERAMIC C1608 JB 1H 102K-T-A
C364 4030007060 S.CERAMIC C1608 CH 1H 270J-T-A
C365 4030009560 S.CERAMIC C1608 CH 1H R75B-T-A
C367 4030009500 S.CERAMIC C1608 CH 1H 0R5B-T-A
C368 4030009500 S.CERAMIC C1608 CH 1H 0R5B-T-A
C369 4030008900 S.CERAMIC C1608 JB 1C 333K-T-A
C370 4030009970 S.CERAMIC C1608 JB 1H 182K-T-A
C372 4030008880 S.CERAMIC C1608 JB 1C 223K-T-A
C373 4030009880 S.CERAMIC C1608 JB 1H 682K-T-A
C374 4030006870 S.CERAMIC C1608 JB 1H 222K-T-A
C375 4030006860 S.CERAMIC C1608 JB 1H 102K-T-A
C376 4030006860 S.CERAMIC C1608 JB 1H 102K-T-A
C377 4550006350 S.TANTALUM TEMSVB2 1A 226M-8L
C378 4030011600 S.CERAMIC C1608 JB 1C 104KT-N
C379 4030006860 S.CERAMIC C1608 JB 1H 102K-T-A
C380 4510005430
S.ELECTROLYTIC
ECEV0JA220SR
C381 4550006250 S.TANTALUM TEMSVA 1A 106M-8L
C385 4030011600 S.CERAMIC C1608 JB 1C 104KT-N
C386 4030007050 S.CERAMIC C1608 CH 1H 220J-T-A
C387 4030007090 S.CERAMIC C1608 CH 1H 470J-T-A
C388 4030007050 S.CERAMIC C1608 CH 1H 220J-T-A
C389 4030006860 S.CERAMIC C1608 JB 1H 102K-T-A
C390 4030007060 S.CERAMIC C1608 CH 1H 270J-T-A
C391 4030007050 S.CERAMIC C1608 CH 1H 220J-T-A
C392 4550006250 S.TANTALUM TEMSVA 1A 106M-8L
C393 4550006760 S.TANTALUM TEMSVB2 1A 336M-8R
C394 4030011600 S.CERAMIC C1608 JB 1C 104KT-N
C395 4030007040 S.CERAMIC C1608 CH 1H 180J-T-A
C396 4030007070 S.CERAMIC C1608 CH 1H 330J-T-A
C397 4030006950 S.CERAMIC C1608 CH 1H 040C-T-A
C398 4550005980 S.TANTALUM TEMSVA 1A 475M-8L
C399 4030008650 S.CERAMIC C1608 JB 1H 332K-T-A
C400 4030006870 S.CERAMIC C1608 JB 1H 222K-T-A
J2 6450001680 CONNECTOR HSJ1122-010010
J3 6450001690 CONNECTOR HSJ1456-01-220
J5 6510018430 S.CONNECTOR AXN330C038P
J6 6510021900 S.CONNECTOR BM02B-ASRS-TF
DS1 5030002000 LCD TTR5515 UPFDHW
DS2 5010000160 S.LED LNJ310M6URA
DS3 5010000160 S.LED LNJ310M6URA
MC1 7700002160 MICROPHON KUC3523-040245
S1 2230001070 S.SWITCH JPM1990-2711R
S2 2230001070 S.SWITCH JPM1990-2711R
S3 2230001070 S.SWITCH JPM1990-2711R
S801 7600000210 ENCODER TP70N00E20-15F-1903
W7 7030003860 S.JUMPER ERJ3GE JPW V
W8 7030003860 S.JUMPER ERJ3GE JPW V
W9 7030003860 S.JUMPER ERJ3GE JPW V
W11 7030003860 S.JUMPER ERJ3GE JPW V
W12 7030003860 S.JUMPER ERJ3GE JPW V
W13 7030003860 S.JUMPER ERJ3GE JPW V
EP1 0910053802 PCB B 5649B
EP2 8930051310 LCD CONTACT SRCN-2251-SP-N-W
EP3 6910012350 S.BEAD MMZ1608Y 102BT
EP4 6910012350 S.BEAD MMZ1608Y 102BT
EP5 6910012350 S.BEAD MMZ1608Y 102BT
6 - 4
REF ORDER DESCRIPTION
NO. NO.
[MAIN UNIT]

7 - 1
SECTION 7 MECHANICAL PARTS AND DISASSEMBLY
REF. NO. ODER NO. DESCRIPTION QTY.
MP1 8210017981 2251 T-front panel (B)-1 1
J1 6510022460 1
1MP2 8930050890 2251 terminal holder
MP3 8010017990 2251 chassis 1
MP4 8210016570 2251 rear panel 1
MP5 8930050870 2251 release button 1
MP7 8310051450 2251 window plate 1
MP8 8930051350 2251 jack rubber 1
MP9 8210016550 2251 jack panel 1
MP10 8610011080 Knob N-287 1
MP13 8930055520 2251 10key 1
MP14 8930050840 2251 minus terminal 1
MP15 8930050850 2251 plus terminal 1
MP20 8930042350 1922 mic sheet 1
MP21 8930051300 2251 mic sponge 1
MP22 8930051290 2251 opt sheet 1
MP23 8830001340 1903 hex nut 1
MP24 8930050900 2251 window sheet 1
MP25 8930036751 Spring 1
Ant connector- BNC-R162
MP27 8830001250 Ant connector-101 1
MP31 8810009510 Screw BT M2 x 4 NI-ZU 8
MP32 8810009560 Screw BT M2 x 6 ZK 7
MP33 8810000100 Screw M2 x 4 ZK 4
MP37 8930050800 2251 jack cap 1
MP39 8860001210 2251 ANT rug 1
MP41 8510013570 2422 shield plate 1
[CHASSIS PARTS]
REF. NO. ODER NO. DESCRIPTION QTY.
1
EP2 8930051310 LCD contact SRCN-2251-SP-N-W
1
1
DS1 8930051310 LCD TTR-5515
MP1 8510011111 1922 VCO case-1
MP2 8510011101 1922 VCO cover-1 1
MP3 8930050811 2251 LCD holder-1 1
MP4 8210016580 2251 reflector 1
MP5 8410002410 2468 PA heatsink 1
[MAIN UNIT]
Screw abbreviations BT: Self-tapping
NI-ZU: Nickel-Zinc
ZK: Black
REF. NO. ODER NO. DESCRIPTION QTY.
EP1 3310002840 Antenna FA-B2E 1
1
1
EP2 0880000840 Battery BP-208
MP1 8930042040 1922 Belt clip
MP2 8930051290 2251 OPT sheet 1
[ACCESSORIES]
EP1
EP2
MP1 MP2
SP1 2510001120 Speaker SDRS-3650P-008 1

7 - 2
UNIT abbreviation (C): CHASSIS PARTS, (M): MAIN UNIT
MP4 (M) MAIN unit
MP7 (C)
MP1 (C)
MP20 (C)
MP37 (C)
MP21 (C)
MP3 (M)DS1 (M)
EP2 (M)
MP1 (M)
MP13 (C)
MP27 (C)
MP10 (C)
SP1 (C)
MP31 (C)
MP32 (C)
MP31 (C)
MP31 (C)
MP31 (C)
MP41 (C)
MP24 (C)
MP2 (M)
MP5 (M)
MP22 (C)
MP32 (C)
MP23 (C)
MP3 (C)
MP32 (C)
MP4 (C)
MP25 (C)
MP32 (C)
MP5 (C)
MP14 (C)
MP31 (C)
MP31 (C)
MP2 (C)
MP15 (C)
MP39 (C)
MP8 (C) MP9 (C)
MP33 (C)
J1 (C)
MP33 (C)
Other manuals for IC-V8
4
Table of contents
Other Icom Transceiver manuals