ICP DAS USA PDS-5105D-MTCP User manual

The package includes the following items:
1. Power Supply: +10 ~ +30 DC (Ex: DP-665)
http://www.icpdas.com/products/Accessories/power_supply/power_list.htm
2. Ethernet Hub (Ex: NS-205)
http://www.icpdas.com/products/Switch/industrial/industrial_list.htm
3. Make sure your PC has workable network settings.
4. Disable or well configure your Windows firewall and Anti- irus
firewall first, else the “Search Servers” on page 3 may not
work. (Please contact with your system Administrator)
Quick Start Guide
(This Document)
For PDS-5105D-MTCP
English/November 2011/Version 1.0
What’s in
the shipping
package?
Preparations for evice
1
PDS
-
5105D
-
MTCP
Quick Start Guide
PDS-5105D-MTCP
Software CD
CA
-
0910
Cable
Screwdriver

1. Connect both the PDS-5105D-MTCP and your computer to the
same sub network or the same Ethernet Switch.
2. Short the RxD and TxD pins (Pin4 and Pin5) of COM1 for self-
test.
3. Supply +10~+30 DC power to the PDS-5105D-MTCP module.
Install VxComm Utility ( 2.11.03 or later):
The software is located at:
CD: \NAPDOS\Driver\VxComm_Driver
http://ftp.icpdas.com/pub/cd/8000cd/napdos/driver/vxcomm_driver/
Connecting the Power and Host PC
2
PDS
-
5105D
-
MTCP
Quick Start Guide
Installi
ng Software on Your PC

1. Double click the xComm Utility shortcut on the desktop.
2. Click the “Search Servers” button to search your PDS-
5105D-MTCP.
3. Double click the name of PDS-5105D-MTCP to open the
configure server dialog box.
4. Contact your Network Administrator to obtain a correct
network configuration (such as IP/Mask/Gateway). Enter
the network settings and then click “OK” button. The PDS-
5105D-MTCP will use the new setting 2 seconds later.
Configuring Ethernet Setting
s
1. Double-Click
2. Click
3. Double Click
3
PDS
-
5105D
-
MTCP
Quick Start Guide
4
.
Configure the
Ethernet settings
5. Click

5. Wait 2 seconds and then click the “Search Servers” button
again to ensure the PDS-5105D-MTCP is working well with new
configuration.
6. Click the “Add Server[s]” button. Assign a COM Port number
and click “OK” to save your settings.
1. Click
2
.
Click
your PDS
-
5105D
-
MTCP
in the list
3. Click
4
.
Assign a COM
Port
number
5. Click
4
PDS
-
5105D
-
MTCP
Quick Start Guide

7. Click on PDS-5105D-MTCP name and check the virtual COM
port mappings on the PC.
8. Click “Tools” >> “Restart river”, and then click the
“Restart river” button.
8. Click
7. Click
5
PDS
-
5105D
-
MTCP
Quick Start Guide
6. Check the COM Port

1. Right click Port 1 and then choose the “Open COM Port” item.
2. Check that the configuration of the COM Port is correct and
then click the “Open COM” button.
Testing your
P S
-
5105
-
MTCP
6
PDS
-
5105D
-
MTCP
Quick Start Guide
3. Click
1. Right Click
2. Click

3. Type a string in the send field then click the “Send” button. If
a response is received, it will be displayed in the received field.
4. If the test is successful, your COM port program is able to
work with this irtual COM Port now.
Related Information
P S-5105 -MTCP product page
:
http://www.icpdas.com/products/Industrial/pds/PDS_Series_Main_Page.htm
P-665 and NS-205 (optional) product page :
http://www.icpdas.com/products/Accessories/power_supply/power_list.htm
http://www.icpdas.com/products/Switch/industrial/industrial_list.htm
4. Click
5. Response Message
ICP AS Web Site: http://www.icpdas.com
Contact Us (E-Mail): servic[email protected] ,[e-mail]
Copyright @ 201
1
by ICP AS Co., Ltd. All Rights Reserved.
7