ICP DAS USA UA-5231 User manual

1
UA-5200 Series Quick Start
In addition to this guide, the package includes the following items:
UA-5231 or
UA-5231M、
UA-5231M-3GWA
Software
Utility CD
CA-0910
Cable
MicroSD
Card
Screw
Driver
Pin Terminal
x 16
(UA-5231M、
UA-5231M-3GWA Only)
M3x6L Screw x 4
44mm DIN-Rail Clip x 1
GSM Antenna
(ANT-421-04)
Only for UA-
5231M-3GWA
Technical Support
UA-5200 User Manual:
CD:\ua-5000\user_manual
http://ftp.icpdas.com/pub/cd/ua-5000/user_manual/
ICP DAS Website: http://www.icpdas.com
Technical Support E-Mail: [email protected]
What’s in the box?
UA-5200 Series Quick Start
English / v1.2 / Mar. 2018

2
UA-5200 Series Quick Start
1. Power Supply: +12 ~ +48 VDC (Ex: DP-665)
2. Ethernet Hub or Switch (Ex: NS-205)
3. PC/NB: Can connect to the network and set the network
Connect the UA-5200 with the RJ-45 Ethernet port to an
Ethernet hub/switch and PC. You can also link directly the
UA-5200 to PC with an Ethernet cable.
After power is connected, please【wait 1 minute】for UA-5200
start-up procedure. When the "RUN/PWR" light starts flashing,
it represents the boot is complete.
Preparations for Devices
Hardware Connection
Power Supply
(12 ~ 48 VDC)
VS+
GND
Ethernet
Cable
Ethernet
Cable
Hub/Switch
P.GND
PWR

3
UA-5200 Series Quick Start
Factory Default Settings of UA-5200
Network
IP
192.168.255.1
Assign UA-5200
a new IP setting
according to your
case.
Netmask
255.255.0.0
Gateway
192.168.1.1
OS
Account
Username
root
After login,
change your
password ASAP.
(Refer User
Manual)
Password
icpdas
Web UI
Account
Username
root
Password
root
1. Change the PC’s IP setting as following.
(Write down the PC original network settings before modify.)
IP
192.168.255.10
Subnet mask
255.255.0.0
Gateway address
192.168.1.1
2. Make sure the PC and UA-5200 is connecting through
Ethernet. And then open a PC side browser. (Ex: Chrome,
IE…)
Network Connection

4
UA-5200 Series Quick Start
3. Type http://192.168.255.1 in the URL address. Use default
Web UI username/password root/root to login the system.
4. Click【System Setting】【Network Setting】【Network
Setting(LAN1)】to change the IP setting by user network.
5. Save the IP setting, restore the PC original IP settings, and
type the new IP in the browser as step-3 to login the Web UI
of UA-5200. And then configure user’s UA project.