ICP DAS USA tDS-700 Series User manual

Copyright © 2016 ICP DAS Co., Ltd. All Rights Reserved. E-mail: [e-mail] Page: 1
Q
Qu ui ic ck k S St ta ar rt t
English/ Dec. 2016/ Version 1.3
f
fo or r t tD DS S- -7 70 00 0, , t tD DS S- -7 70 00 0i i, ,
t
tD DS SM M- -7 70 00 0 S Se er ri ie es s
Shipping Package
The package includes the following items:
tDS-700/tDS-700i/tDSM-700 Series x1 Quick Start x1 Software CD x1 CA-002 Cable x1
1
1
1
I
In ns st ta al ll li in ng g S So of ft tw wa ar re e o on n Y Yo ou ur r P PC C
Install VxComm Utility (v2.13.05 or later), which can be obtained
from either the companion CD-ROM or the ICP DAS web site:
CD: \NAPDOS\software\VxComm_Driver\
http://ftp.icpdas.com/pub/cd/tinymodules/napdos/software/vxcomm_driver/
2
2
2
Or

Copyright © 2016 ICP DAS Co., Ltd. All Rights Reserved. E-mail: [e-mail] Page: 2
C
Co on nn ne ec ct ti in ng g t th he e P Po ow we er r a an nd d H Ho os st t P PC C
Make sure your PC has workable network settings.
Disable or well configure your Windows firewall and Anti-Virus firewall first, else the “Search Servers”
on Chapter 5 (page 4) may not work. (Please contact with your system Administrator)
Check Init/Run switch is on “Run”position.
Connect both the tDS/tDSM series and your PC to the same sub network or the same Ethernet
Switch.
Supply power (PoE or +12 ~ +48 VDC ) to the tDS/tDSM series.
3
3
3

Copyright © 2016 ICP DAS Co., Ltd. All Rights Reserved. E-mail: [e-mail] Page: 3
S
Se el lf f- -T Te es st t W Wi ir ri in ng g
RS-232 Wiring: Connect the RxD to the
TxD pins (The tDS-712 is used as an
example.)
RS-422 Wiring: Connect the RxD1- to the
TxD1- pins and connect the RxD1+ to the
TxD1+ pins (The tDS-715 is used as an
example.)
Note: While using RS-485 modules (e.g., tDS-715), you should wire the Data1+ with Data2+
signals, and wire the Data1- with Data2- signals for self-test.
Then open the first two COM Ports, send data to one and receive data from the other.
4
4
4

Copyright © 2016 ICP DAS Co., Ltd. All Rights Reserved. E-mail: [e-mail] Page: 4
C
Co on nf fi ig gu ur ri in ng g N Ne et tw wo or rk k S Se et tt ti in ng gs s
Double click the VxComm Utility shortcut on the desktop.
Click the “Search Servers” button to search your tDS/tDSM.
Double click the name of tDS/tDSM to open the “Configure Server (UDP)” dialog box.
Contact your Network Administrator to obtain a correct network configuration (such as
IP/Mask/Gateway). Enter the network settings and then click “OK”. The tDS/tDSM will use the new
setting 2 seconds later.
5
5
5
Factory Default Settings for the tDS/tDSM:
IP
192.168.255.1
Gateway
192.168.0.1
Mask
255.255.0.0





Copyright © 2016 ICP DAS Co., Ltd. All Rights Reserved. E-mail: [e-mail] Page: 5
C
Co on nf fi ig gu ur ri in ng g V Vi ir rt tu ua al l C CO OM M P Po or rt ts s
Wait 2 seconds and then click the “Search Servers” button again to ensure the tDS/tDSM is
working well with new configuration.
Click the name of the tDS/tDSM to select it.
Click the “Add Server[S]”button.
Assign a COM Port number and click “OK”to save your settings.
6
6
6





Copyright © 2016 ICP DAS Co., Ltd. All Rights Reserved. E-mail: [e-mail] Page: 6
Click on tDS/tDSM name and check the virtual COM Port mappings on the PC.
Click the “Restart Driver”item in the “Tools”menu to display the “VxComm Utility:
Restarting Driver”dialog box, and then click the “Restart Driver”button.

Copyright © 2016 ICP DAS Co., Ltd. All Rights Reserved. E-mail: [e-mail] Page: 7
S
Se el lf f- -T Te es st t
Right click Port1 and then choose the “Open COM Port”item.
Check that the configuration of the COM Port is correct and then click the “Open COM”button.
Type a string in the “Send”field.
Click the “Hex/Text”option in the “Display”section.
Click the “Send” button to send the message.
If a response is received, it will be displayed in the received field.
7
7
7






Success Test

Copyright © 2016 ICP DAS Co., Ltd. All Rights Reserved. E-mail: [e-mail] Page: 8
Note that if you intend to use Internet Explorer to open the tDS-700 series web server,
ensure that the cache function is disabled in order to prevent browser access errors,
please disable your Internet Explorer cache as follow:
Step 1: Click “Tools” >> “Internet Options...” in the menu items.
Step 2: Click the “General” tab and then click the “Settings...” button in Temporary Internet files
frame.
Step 3: Click the “Every visit to the page” and then click the “OK” button in Settings box and Internet
Options box.
For more detail, please refer to “FAQ: How to avoid a browser access error that causes a blank page
to be displayed when using Internet Explorer”
R
Re el la at te ed d I In nf fo or rm ma at ti io on n
tDS/tDSM product page:
http://www.icpdas.com/root/product/solutions/industrial_communication/pds/tds-700.html
Documentation/Firmware:
CD: \Napdos\tDS-700\Document
http://ftp.icpdas.com/pub/cd/tinymodules/napdos/tds-700/document/
Firmware:
CD: \Napdos\tDS-700\Firmware
http://ftp.icpdas.com/pub/cd/tinymodules/napdos/tds-700/firmware/
NS-205 and NS-205PSE product page (optional):
http://www.icpdas.com/root/product/solutions/industrial_ethernet_switch/ns-205.html
http://www.icpdas.com/root/product/solutions/industrial_ethernet_switch/ns-205pse.html