idi Aspect100UC Plus User manual

Image Diagnostics Inc
Aspect100UC Plus
Mobile Urology Table
Operator Manual
Made in the USA

Operator Manual Aspect 100UC Plus
L100-3065 REV C www.imagediagnostics.com 1
Table of Contents
PRODUCT DATA ...............................................................................................................................2
CUSTOMER SUPPORT ......................................................................................................................4
SYMBOLS AND DATA PLATE ............................................................................................................5
SPECIFICATIONS ...............................................................................................................................7
ELECTROMAGNETIC COMPATIBILITY STATEMENT .........................................................................8
SETUP ...............................................................................................................................................9
SAFETY HAZARDS...........................................................................................................................11
SAFETY HAZARD ALERTS................................................................................................................11
SAFETY INSTRUCTIONS ..................................................................................................................13
ACCESSORIES..................................................................................................................................15
EMERGENCY STOP SWITCH ...........................................................................................................26
ELECTRIC SYSTEM...........................................................................................................................27
CONTROLLER CONNECTIONS.........................................................................................................28
GENERAL CLEANING.......................................................................................................................29
MAINTENANCE...............................................................................................................................32
USER REPLACEMENT ITEMS...........................................................................................................33
TROUBLE-SHOOTING .....................................................................................................................33
DISPOSAL OF COMPONENTS .........................................................................................................34
WARRANTY ....................................................................................................................................35
Linak documentation can be found at their web site: www.linak-us.com
Select “Products | User manuals” and click on “Actuators & Electronics”.
The text of this manual was originally written, approved
and published by the manufacturer in English.

Operator Manual Aspect 100UC Plus
L100-3065 REV C www.imagediagnostics.com 2
PRODUCT DATA
•Low attenuation carbon fiber tabletop
•Tabletop: 28in x 46-1/2in (71cm x 118cm)
•Radiolucent tabletop extension: 24in x 34in (61cm x 86cm)
•Imaging area, main tabletop: 25in x 20in (63.5cm x 50.8cm)
•Imaging area, tabletop extension: 24in x 34in (61cm x 86cm)
•Longitudinal travel: 10in (25.4cm)
•Trendelenburg: ±15
•Lateral travel: ±3.5in (±88mm)
•Height range: 30in to 40in (76cm to 101cm)
•Patient capacity: 525lbs (238kg) including additional accessories
without tabletop extension.
400lbs (181kg) including additional accessories with
tabletop extension.
•Table weight: ~670lbs (304kg)
•Tabletop extension: 28in to 24in x 34in (71cm to 61cm x 86cm)
•Film/digital cassette tray (optional)
•Locking swivel casters
•Low attenuation table pads
•Foot and hand operator controls
•Accessory package
•Emergency stop switch

Operator Manual Aspect 100UC Plus
L100-3065 REV C www.imagediagnostics.com 3
INTRODUCTION
Overview
This manual is not intended as a substitute for certified training for the use of this
equipment. The operation of this equipment should be limited to qualified medical
personnel who have been trained in the use of medical equipment.
The text ofthis manualwas originally written, approved and published by the manufacturer
in English.
This equipment complieswith applicable FDA performancestandardscontained in 21CFR
at date of manufacture.
Owner Responsibilities
The owner of this equipment is responsible to ensure system compatibility, the
qualifications of operators and maintenance personnel. Operators must be properly
trained and have obtained credentials from the appropriate authorities.
This equipment must be installed in an area provided with the proper electrical power.
The owner of this equipment is responsible for verifying continued compliance with all
applicable regulations and standards. Consult local, state, federal and/or international
agencies regarding specific requirements and regulations applicable to the use of this
equipment.
Image Diagnostics, Inc. certifies only this equipment. Operating practices and safety for
this equipment are the sole responsibility of the owner and operators. Image Diagnostics,
Inc. assumes no liability or responsibility for personal injury or damage resulting from
misuse of this equipment.
Never make modifications or adjustments to this equipment unless directed by a qualified
Image Diagnostics representative. This equipment, when properly manufactured, meets
US federal regulations and international standards. Unauthorized modifications to this
equipment may impact adherence to these standards and make this equipment unsafe to
operate.

Operator Manual Aspect 100UC Plus
L100-3065 REV C www.imagediagnostics.com 4
CUSTOMER SUPPORT
Image Diagnostics, Inc. may provide on request circuit diagrams, component part lists,
calibration instructions, or other information to assist the user’s appropriately qualified
technical personnel to repair those parts of equipment which are designated by the
manufacturer as repairable.
For technical assistance, call IDI at [phone]. Be prepared to give the complete
model and serial number found on the data plate on the table base at the time
of contact.

Operator Manual Aspect 100UC Plus
L100-3065 REV C www.imagediagnostics.com 5
SYMBOLS AND DATA PLATE
Intertek Testing Service
Attention! Consult accompanying documents.
Failure to follow these instructions can cause accidents
resulting in serious personal injury or damage to equipment.
CD ROMs containing file copies of all relevant drawings,
BOMs, and documentation are included with this manual, one
for general operators and one for the BIOMED department.
Type B equipment
Alternating current
Data Plate
Maximum Patient Weight
Equipotential Terminal (Featured on some models)
Indicates the Equipotential terminal of the table. Provides for a
connection between the table and the equipotential bus bar of
the facility.
Emergency Stop Button

Operator Manual Aspect 100UC Plus
L100-3065 REV C www.imagediagnostics.com 6
LATEX
Recycle
Some of the material can be recycled rather than discarded.
Not for Patient Transport
The table must not be relocated with a patient on it, nor shall it
be used to move a patient.
Do Not Sit
This label is found on parts that are not designed to support the
sitting weight of a patient.
Not made with natural rubber latex
Single Use Item
This symbol, when used in this manual, indicates the potential
of exposure to harmful x-rays. Be sure to read and comply with
all warnings.
European
Authorized
Representative
Warning! Information or instructions shown near this symbol
must be adhered to in order to prevent a potentially hazardous
situation which if not avoided, could result in death, personal
injury or damage to the equipment.
Protective Ground
This is the common tie point between the AC cord ground,
frame ground, and controller ground.
CPR (Cardiopulmonary Resuscitation)
2
EC
REP
Advena Ltd. Tower Business Centre, 2nd Flr.,
Tower Street, Swatar, BKR 4013 Malta

Operator Manual Aspect 100UC Plus
L100-3065 REV C www.imagediagnostics.com 7
SPECIFICATIONS
Mode of Operation:
For continuous operation with short time loading
Duty Cycle: 10% (6 min/hr)
Type of Equipment:
Class I Type B (as defined by IEC 60601-1, UL 60601-1,
EN 60601-1, CSA 601.1, IEC 60601-2-32:1994 and IEC 60601-2-46)
Type B protection against electrical shock
Complies with FDA standards per 21CFR
Electrical:
Supply Voltage: 120±5% Vac 60Hz or 23010% Vac 50Hz
Duty Cycle: 10% (6 min/hr)
Current Rating: Less than 10 Amps
Internally Battery Powered
Environmental:
Operating Temperature Range: -10C to +40C
Operating Humidity Range: 30% to 75% relative humidity, noncondensing
Operating Pressure Range: 700hPa to 1060 hPa
Transport & Storage Temperature Range: -40C to +60C
Transport & Storage Humidity Range: 30% to 75% relative humidity,
noncondensing
Transport & Storage Pressure Range: 500hPa to 1060 hPa
Rated IPX4 (Protected against splashing water)
Meets EMC requirements of EN 60601-2 (1993)
Tabletop:
The tabletop is made of carbon fiber and is certified to meet all the requirements
of 21 CFR Subchapter J

Operator Manual Aspect 100UC Plus
L100-3065 REV C www.imagediagnostics.com 8
ELECTROMAGNETIC COMPATIBILITY STATEMENT
This equipment may generate and use radio frequency energy. The equipment
must be installed and used according to the manufacturer’s instructions in order
to avoid radio frequency interference.
If this equipment generates or receives interference:
•Verify that the equipment is the cause by turning the system off and on.
•In the event of unintended motor actuation, immediately remove power to the
equipment.
•Use only cables supplied by Image Diagnostics, Inc.

Operator Manual Aspect 100UC Plus
L100-3065 REV C www.imagediagnostics.com 9
SETUP
Unpack
No special handling is required for unpacking this equipment at the site. Conventional
shipping materials are used.
To remove the table from the shipping pallet, first remove the shipping brackets that
secure the table to the wooden pallet using a 9/16” wrench. Then roll the table down a
temporary ramp or lift off pallet with a forklift. When using a forklift, pad the forks to
protect the paint. Lift from under the metal base. When rolling the table off the pallet by
hand, use the long metal rails attached to the tabletop to guide the table after releasing
the caster brakes.
Upon receipt of product and before placing table into service, table condition and
functionality should be reviewed by a Biomed or equivalent in-house support/service
resource.
Install
Mobile tables are equipped with four locking caster brakes. Unlock brakes while
positioning.
Hand and foot controls are standard with this table. The operator should become familiar
with the controls before using.
The table operates on 110Vac (or 230Vac) or on internal battery backup. Plug the AC
power cord into a properly grounded hospital grade outlet. The green indicator on the
control box with illuminate, however, the hinged cover will need to be opened to see the
green indicator.
The outlet used should be visible and accessible to the user. The cord should be routed
where it will not be subject to damage or be a hazard. Check that the power cord ground
Recycle or dispose of shipping
material per local regulations.

Operator Manual Aspect 100UC Plus
L100-3065 REV C www.imagediagnostics.com 10
pin is in good condition. Check that the cord ground wire is securely connected to the
ground stud inside the unit.
During an AC failure, the table will automatically run on battery backup without any
manual switching required. It is recommended that power be applied at all times, even
when not in use, to keep a proper charge on the batteries and achieve maximum battery
life. (Batteries are being charged during normal use).
Where the integrity of the external protective earth conductor is in doubt, this equipment
shall be operated from its internal electrical power source by unplugging the power cord
from the mains.
Preparation for Patient Use
New Installation:
This equipment will need to be properly cleaned before patient use as it will inevitably come in
contact with contaminants during shipping, unpacking, storage, and installation.
After Installation:
This equipment will need to be properly cleaned between patient use as it will inevitably come
into contact with contaminants during procedures.
Preparation for Performing CPR
Return table to level position, lower table to a comfortable height and
verify that patients head is located at handle end before performing
CPR on a patient. Image Diagnostics recommends prior to placing
table into service, facility/operators create a procedure for positioning the
table for possible CPR events. CPR should not be performed on the 100UC
Tabletop Extension.
Review the SAFETY INSTRUCTIONS before
operating table

Operator Manual Aspect 100UC Plus
L100-3065 REV C www.imagediagnostics.com 11
SAFETY HAZARDS
Operators using this equipment should understand the safety issues,
emergency procedures, and operating instructions provided.
Comments and questions regarding safety should be addressed to:
Customer Support
Image Diagnostics, Inc.
310 Authority Drive
Fitchburg, MA 01420
USA
Or call IDI at [phone]
SAFETY HAZARD ALERTS
Alert
Circumstances for Use
DANGER
Indicates an imminently hazardous situation
which, if not avoided, will result in death or serious
injury.
WARNING
Indicates a potentially hazardous situation which,
if not avoided, could result in death or serious
injury.
CAUTION
Indicates a potentiallyhazardous situation which,
if not avoided, may result in minor or moderate
injury or equipment damage.
WARNING!
This equipment has not been tested for use with high
frequency surgical equipment, cardiac defibrillators, or
cardiac defibrillator monitors.
WARNING!
If an antistatic path is required, use the equipment on an
antistatic floor. Use only the tabletop pad (patient mattress)
supplied with the table.

Operator Manual Aspect 100UC Plus
L100-3065 REV C www.imagediagnostics.com 12
WARNING!
This product may be used in conjunction with x-ray
equipment. This constitutes potential expose to harmful x-rays
for both the patient and operator. Be sure to use proper
radiation shielding.
CAUTION
Secure power cord when in use so that it does not get
entangled with other equipment and/or compromise
the safety of the operator and/or staff.
CAUTION
Do not modify this equipment without authorization of the
manufacturer.

Operator Manual Aspect 100UC Plus
L100-3065 REV C www.imagediagnostics.com 13
SAFETY INSTRUCTIONS
This manual should be accessible to all personnel installing, operating, or
servicing this equipment.
Only a qualified technician may install or maintain this equipment.
Only qualified persons may operate this equipment.
Failure to follow safety precautions may result in serious injury to patient or user
or damage to equipment.
This symbol, when found marked on the equipment
means:
”Attention, consult accompanying documentation.”
WARNING!
Move tabletop to central cross travel position when loading or
unloading patient. Always safely position and secure patient
on table
WARNING!
Do not exceed patient weight of 400lbs (181kg) when the
tabletop extension IS attached to the table.
Do not exceed patient weight of 525lbs (238kg) when the
tabletop extension is not attached to the table.
CAUTION
Do not leave patient on table unattended
CAUTION
Patient must be restrained at all times. The restraining straps
are not intended to restrain an uncontrollable patient.
CAUTION
The carbon fiber top is subject to damage or possible damage
from impact from other objects. Take caution when using
power driven diagnostic equipment around table. Regular
inspection of the tabletop is necessary for the safety of patient
and operator.

Operator Manual Aspect 100UC Plus
L100-3065 REV C www.imagediagnostics.com 14
CAUTION
Ensure that the tabletop does not contact other
equipment as it moves.
CAUTION
During operation, listen for any unusual sounds and watch
for uneven operation.
CAUTION
If using legholder stirrups with this table, use caution.
The boot will drift if the clamp is not securely tightened.
Note: there is a left and a right boot.
CAUTION
Do not sit at the head of the table or on the table
extension.
CAUTION
Do not place or store any containers or large items
underneath the tabletop. As the tabletop is descending,
contact with an obstruction may cause permanent damage
to the table.
CAUTION
Do not use table for patient transport.
CAUTION
Avoid tabletop impacts. Repeated impacts to siderails and
tabletop may damage carbon fiber table structure and
mechanical support components. Reference maintenance
schedule within manual for additional details.
ATTENTION
Use handle at all times when moving the table.

Operator Manual Aspect 100UC Plus
L100-3065 REV C www.imagediagnostics.com 15
-Push down to lock
ACCESSORIES
• Tabletop Extension
This table is equipped with an extension that may be attached to one end
of the tabletop.
Note: Before installing the extension, make sure the end of the table is
free from obstructions. Remove anything hanging over the end, such as
cables, drapes, sheets, patient gowns, and other material.
EXTENSION INSTALLATION
To attach the extension to the tabletop, slide the extension onto the tabletop accessory rails with
the extension held at a slight angle as shown. Bring the end of the extension level as the
extension fully engages. Try to pull the extension straight back after installing to make sure that it
is fully locked in place.
CAUTION
Secure wheel locks by depressing locks on all 4
wheels prior to patient usage and when table is not in motion.
Disengage to reposition.
WARNING!
The extension is rated to support
a maximum weight of 200lbs (90kg). Do not exceed limit.
Never allow the patient to sit on extension.
CAUTION
Verify extension is locked in place before using.
Observe position of extension during table movement
to avoid collisions.

Operator Manual Aspect 100UC Plus
L100-3065 REV C www.imagediagnostics.com 16
EXTENSION REMOVAL
Tilt the far end of the extension up and lift off.
Tabletop Extension
Part Number A100-1400
•Patient Restraint Straps
Hook & loop fasteners
Patient Restraint Strap Set
Part Number C000-0571
(Two straps 3” wide)

Operator Manual Aspect 100UC Plus
L100-3065 REV C www.imagediagnostics.com 17
•Elbow Supports (OPTIONAL ACCESSORY)
Elbow supports are available for use by the doctor. The elbow support weight limit is
75lbs (31kg) each. The right and left supports are not interchangeable.
INSTALLATION
1. Line up the large and small pin to the holes in the mounting block located at
the perineal end of the table.
2. Slide pins into appropriate holes and push down to lock in. Rotate the arm
right and left 180º.
REMOVAL
Pull the elbow support up and out of the block.
Elbow Support
Contact IDI Customer Service for replacement items.
Elbow Supports
Part Number C000-0594 (pair)

Operator Manual Aspect 100UC Plus
L100-3065 REV C www.imagediagnostics.com 18
• STIRRUP EXTENSION KIT (OPTIONAL ACCESSORY)
EXTENSION (qty 2 supplied with kit)
CLAMP (qty 2 supplied with kit)
SLIDE ONE CLAMP ONTO
ACCESSORY RAIL
SLIDE A SECOND CLAMP ONTO THE
EXTENDER AND INSTALL STIRRUP
TABLETOP EXTENSION CAN SLIDE
OFF & ON WITH STIRRUPS IN PLACE
The IDI Stirrup Extension Kit allows
the stirrups to be attached to the table
in an advantageous position that
allows the tabletop extension to slide
on and off without repositioning the
stirrups.
Stirrup extension Kit
Part Number A100-1876
Replacement Accessory Rail
Clamp
Part Number C000-0656
Replacement Extension
Part Number Z100-1858
Tighten all four clamps
before patient use

Operator Manual Aspect 100UC Plus
L100-3065 REV C www.imagediagnostics.com 18
• ANCILLARY TRAY (OPTIONAL ACCESSORY)
The stainless-steel Ancillary Trays provide a convenient way to keep
instruments conveniently close to the doctor. These have pins that drop
into the holes that the elbow supports would use. The trays can’t be used
at the same time as the elbow supports. The trays easily swing to the side
to be out of the way.
Ancillary Tray (Doctor’s Left) Ancillary Tray (Doctor’s Right)
Part Number A100-1968 Part Number A100-1967
LEFT
RIGHT