IDTECK Star RFK101 User manual

Quick Installation Guide
PIN & Proximity Card Reader

1
Quick Installation Guide
Table of Contents
1. Identifying Supplied Parts..................................................................................................... 2
2. Installation............................................................................................................................ 3
3. Wire Color Table of the Reader............................................................................................ 4
4. Wire Connection toAccess Controller.................................................................................. 5
5. Product Manual Download Information................................................................................ 6

2
Quick Installation Guide
1. Identifying Supplied Parts
Please unpack and check the contents of the box.
Main unit Wall Mount O-ring Quick Manual
(1ea) (1ea) (5ea) (1copy)
3.5*40mmScrew 3.5*12mmScrew 6.0*30mmAnchorBolt
(4ea) (4ea) (4ea)
2PINCable 6PINCable 8PINCable
(1ea) (1ea) (1ea)

3
Quick Installation Guide
2. Installation
2-1. Using two 6-32 or M3 screws, install wall mount to the wall.
2-2. Insert 5 O-rings to the wall mount as indicated, then route the cable of the main unit through the
center hole and push the main unit to wall mount to lock the main unit and make sure that the main
unit is locked with wall mount.

4
Quick Installation Guide
3. Wire Color Table of the Reader
IO PINs Signal Wire Color
2PIN (J1)
Main Power (+12V) DC +12V Red
Power Ground GND Black
6PIN (J2)
Wiegand Data 0 Out WIK_DATA0 Green
Wiegand Data 1 Out WIK_DATA1 White
Not Connect Not Connect Orange
RS-232-TX TX OUT Purple
Not Connect Not Connect Brown
RS-232-GND GND Black
8PIN (J3)
Tamper Out (INPUT) Tamper Switch-IN Green with White stripe
Tamper Out (GND) Tamper Switch-GND Gray
LED Control In RED Control White with Red stripe
LED Control In GRN Control Yellow
LED Control In YELControl Blue with White stripe
Buzzer Control In Buzzer Control Blue
Not Connect Not Connect Pink
Not Connect Not Connect Cyan

5
Quick Installation Guide
4. Wire Connection to Access Controller
Connection Parts Connection Method
Main Power (+12V) Connect DC+12V wire of Power to Red wire of RFK101 / IPK101.
Connect GND wire of Power to Black wire of RFK101 / IPK101.
Wiegand Data Out
Connect Green wire of RFK101 / IPK101 to Wiegand D0 input port of the
Controller.
Connect White wire of RFK101 / IPK101 to Wiegand D1 input port of the
Controller.
LED Control In
If you want to control LEDs, connect each LED Control wire (White with
red stripe, Yellow, Blue with White stripe wire) of RFK101 / IPK101 to GND
of controller. (In case of using a relay, connect NO to the LED Control wire
and COM to GND)
Buzzer Control In If you want to control the buzzer, connect Blue wire of RFK101 / IPK101 to
GND of controller.(In case of using a relay, connect the NO to the Blue
wire and COM to GND)
RS-232-GND Connect to the COM port of the PC. (Connect pin #2 of the DB-9
connector to the purple wire; connect the black wire of the 6-pin connector
to pin #5 of the DB-9 connector).
PC RS232 TX
RS232 GND
Access Controller
Main Power (+12V)
Power Ground (GND)
Wiegand Data 0
Wiegand Data1
Tamper Switch (INPUT)
Tamper Switch (COM)
Buzzer Control
LED Control (Red)
LED Control (Green)
LED Control (Yellow)
Red
Black
Green
White
Green with White stripe
Gray
Blue
White with Red stripe
Yellow
Blue with White stripe
Black
Purple

6
Quick Installation Guide
5. Product Manual Download Information
This Quick Installation Guide is a manual that provides the Basic Installation Information of Product. If you need
detailed information of the product, please download detailed manual following the steps specified below.
For Registered Users of our Homepage:
1. Visit IDTECK’s homepage (www.idteck.com).
2. Click the Sign in button at the top of the Homepage and log in using your registered
ID and P/W.
3. Click the ‘PRODUCT’ menu at the main page of our website and select the product that you wish to download
a manual for.
4. At the bottom part of the product’s page you selected, click “DOWNLOAD” button and download the manual.
For Un-Registered Users of our Homepage:
1. Visit IDTECK’s homepage (www.idteck.com).
2. Please click “Member Join” menu at the top of our Homepage and register your details following the
registration process.
3. You can use your ID and P/W after web administrator approves. Once approved, then please refer to “For
registered users of our homepage” above.
Please contact us as below if you have any inquiries or issues.
IDTECK Headquarter
5F, Ace Techno Tower B/D, 468, Gangseo-Ro,
Gangseo-Gu, Seoul, 07573, Korea
Tel: [phone]
Fax: [phone]
E-mail: [email protected]
Website: www.idteck.com
E-Training Center: http://www.idtecktraining.com

Jul. 2016 Copyright ©2016 IDTECK Co., Ltd.
Quick Installation Guide
The specifications contained in this manual are subject to change without notice at any time.
5F, Ace Techno Tower B/D, 468, Gangseo-Ro,
Gangseo-Gu, Seoul, 07573, Korea
Tel : [phone]
Fax : [phone]
E-mail : [email protected]