IDTECK SR30 User manual

User’s Manual
13.56MHz Contactless Smart Card Reader
13.56MHz Contactless Universal Smart Card Reader
Fingerprint-Stored Smart Card ID-Only Reader

Table of Contents
1. Important Safety Instructions...................................................................3
2. General........................................................................................................4
3. Features......................................................................................................4
4. Identifying Supplied Parts.........................................................................5
5. Specification...............................................................................................6
6. Installation..................................................................................................8
7. Wire Color Table.........................................................................................9
8. Output Format..........................................................................................10
9. Wire Connection toAccess Controller...................................................11
11.Appendix.................................................................................................12
12. FCC Registration Information...............................................................13
13. Warranty Policy and Limitation of Liability..........................................14
2

1. Important Safety Instructions
When using the 13.56MHz [MIFARE] Contactless Smart Card Reader (SR30) / 13.56MHz
Contactless Universal Smart Card Reader (SR30U) / Fingerprint Stored Smart Card ID Only
Reader (SR30B), basic safety precautions should always be followed to reduce the risk of fire, electrical
shock, and injury to persons.
1. Fully read and understand all instructions and follow them completely.
2. Follow all warnings and instructions marked on the product.
3. Do not use liquid or aerosol cleaners. Use a damp cloth for cleaning. If necessary, use mild soap.
4. Do not use this product near water.
5. Only operate this product using the type of power source indicated. If you are not sure of the type
of power supplied to your installation site, consult your dealer of local power company.
6. Never insert objects of any kind into the product or through the cabinet slots as they may touch
voltage points and/or short circuit parts possibly resulting in fire or electric shock.
Never spill liquid of any kind on the product.
7. Never disassemble this product by yourself; take the unit to a qualified service center whenever
service or repair is required. Opening or removing the covers may expose you to dangerous
voltages or other risks. Also, incorrect reassembly can cause electric shock when the unit is
subsequently used.
8. Unplug this product from the Direct Current (DC) power source and refer to qualified service
personnel under these conditions:
zWhen the power supply cord or plug is damaged or frayed.
zIf liquid has been spilled on the product.
zIf the product does not operate normally after following the operating instructions in this
manual.
Adjust only those controls that are covered by the operating instructions in this manual.
Improper adjustment of other controls that are not covered by this manual may damage
the unit and will often require extensive work by a qualified technician to restore normal
operation.
zIf the product exhibits a distinct change in performance.
3

2. General
The IDTECK SR30/SR30U/SR30B Smart Card Reader is a proximity reader with the read range of
up to 4 inches (10cm) and can be installed on any doorframe or mounted on any wall.
IDTECK SR30 reads the serial number stored on the Philips Mifare™ card (ISO14443 Type A) and
transmits the data to the controller in various formats.
IDTECK SR30U reads the serial number stored on the ISO14443 Type A/B card and transmits the data
to the controller in various formats.
IDTECK SR30B reads the IDs stored on the user cards that have been issued using the PRG2000B
and transmits the data to the controller in various formats.
Seven 2-color LED indicators (red and green) and a built-in Piezo buzzer will guarantee you accurate
and reliable system operations.
3. Features
9Common
- 13.56MHz [MIFARE] Contactless Smart Card Reader
- Read Range: Up to 4 inches (10cm)
- 7-Array LED Indicators (Red and Green) and a Buzzer
- External LED Control
- External Buzzer Control
- Easy to install on Mullion Mounting suitable
- Reverse Polarity Protection
9SR30
- ISO 14443 type A compatible
- Serial Number Read only
- 34bit Wiegand (default) / RS232, ABA Track II (optional) Output Format
- Compatible Controller: iCON100SR, iTDC-SR, Third Party Controller
9SR30U
- ISO 14443 type A/B compatible
- Serial Number Read only
- 34bit Wiegand (default) / RS232, ABA Track II (optional) Output Format
- Compatible Controller: iCON100SR, iTDC-SR, Third Party Controller
4

9SR30B
- Read Encrypted ID of Smart Card that is written by PRG2000B
- 26bit Wiegand (default) / RS232, ABA Track II (optional) Output Format
- Compatible Controller: iCON100, iTDC, FINGER007SRB, Third Party Controller.
- Compatible Reader: SR10B, SRK101B, FGR006SRB, FINGER006SRB
4. Identifying Supplied Parts
Please unpack and check the contents of the box:
ReaderModule SR30/SR30U/SR30B Bezel
UserManual
(1ea) (1ea) (1 copy)
3.5*40screw 3.5*25screw AnchorBolt
(2ea) (2ea) (2ea)
5

5. Specification
Model SR30 SR30U SR30B
Type A ISK50 / IMC135: Up to 2 inches (5cm)
ISC80: Up to 4 inches (10cm)
Read Range
Type B N/A ISC80B: Up to 2
inches (5cm) N/A
Card Reading Time 30ms
Power / Current DC 12V / Max. 150mA
Input Port 2 Input Ports (External LED Control, External Buzzer Control)
34bit Wiegand (Default) 26bit Wiegand
(Default)
Output Format
RS232,ABA Track II (Selectable)
LED Indicator / Buzzer 3 Array LED Indicator(Red, Green) / Piezo Buzzer
Operating Temperature -35°~ +65℃(-31°~ +149℉)
Operating Humidity 10% ~ 90% Relative Humidity non-condensing
Color / Material Dark Peal Gray / Polycarbonate
Dimensions (W x H x T) 47mm X 115mm X 22 mm (1.8’’ X 4.5’’ X 0.88’’)
Weight 150g (0.33lbs)
Index of Protection IP65 / IP66
Certification FCC, CE, MIC
6

Card Read Range of each Contactless Smart[Mifare] Reader
Model ISC80 ISC80B ISK50 IMC135 IHC80
SR10 /
SR30 /
SRK101
Up to 4
inches
(10cm)
Up to 2 inches (5cm)
SR10B /
SR30B /
SRK101B
Up to 4
inches
(10cm)
Up to 2 inches (5cm)
SR10U /
SR30U /
SRK101U
Up to 4
inches
(10cm)
Up to 2 inches (5cm)
SR10RW /
SR30RW /
SRK101RW
Up to 4
inches
(10cm)
Up to 2 inches (5cm)
FINGER007SR(B)
FINGER006SR(B)
FGR006SR(B)
Up to 4
inches
(10cm)
Up to 2 inches (5cm)
SR505
Up to 4
inches
(10cm)
Up to 2 inches (5cm)
Read
Range
FACE007SR
FACE006SR
Up to 4
inches
(10cm)
Up to 2 inches (5cm)
7

6. Installation
6-1. Drilling Screw Holes
Drill two 6-32 or M3 screw holes 3.3" (8.38cm) apart vertically, and drill one 1/2" hole for the
reader cable between the two holes (see the diagram below).
6-2. Installing the Reader Module
Put the reader cable into the center hole and hold the reader module using two 6-32 or M3 screws.
6-3. Snapping the Bezel into Place
Put the bezel on the reader module, then press it until it clicks into place.
6-4. Installation Considerations
1. When installing a reader on a metal wall
The read range may get reduced if the reader is installed on a metal surface. To prevent
such a read range reduction, install a Spacer between the metal surface and the reader.
8

2. When installing more than two readers side by side or back to back
The read range may get reduce if more than two readers are installed side by side or back to
back. Also, when a card is presented to one of the readers, the other reader may wrongly
recognize the card as well. To prevent such interference, make sure the distance between
readers is at least 20cm.
7. Wire Color Table
Signal Color
Main Power (+12V) Red
Power Ground (GND) Black
ABA Track II CP Out Orange
Wiegand Data 0 Out /
ABA Track II Data Out Green
Wiegand Data 1 Out /
ABA Track II Clock Out White
Buzzer Control In Blue
LED Control In Yellow
†34/26bit Wiegand Select In Gray
RS232 (TX) Purple
RS232 (RX) Brown
* Cut out the tail connector before installation.
†Applicable to SR30 only.
9

8. Output Format
8-1. Wiegand Output Format
Data Format (34-bit /26-bit)
Bit 1 / Bit 1 : Even Parity Bit of Bit 2 to Bit 17 / Bit 2 to Bit 13
Bit 2 to Bit 33 / Bit 2 to Bit 25 : 4-byte ID number / 3-byte ID number
Bit 34 / Bit 26 : Odd Parity Bit of Bit 18 to Bit 33 / Bit 14 to Bit 25
Timing Diagram
8-2 RS-232C(Option) Data Format
START(0x02H) DATA(10 or 8 char’s) END(0x03H) LRC
Baud Rate: 9600bps
DATA: With 4 bytes(34bits), 10 characters,
With 3 bytes(26bits), 8 characters.
LRC: One single value of XOR from ‘START’ to ‘END’.
10