2
Contents
1 Preliminary note....................................................................................................3
1.1 Symbols used.................................................................................................3
2 Safety instructions ................................................................................................3
3 Functions and features.........................................................................................4
4 Function................................................................................................................4
4.1 Communication, parameter setting and evaluation ........................................4
4.2 Switching function ..........................................................................................5
4.3 Analogue function...........................................................................................5
5 Installation ............................................................................................................7
6 Electrical connection.............................................................................................8
7 Operating and display elements...........................................................................9
8 Menu...................................................................................................................10
8.1 Menu structure .............................................................................................10
8.2 Explanation of the menu............................................................................... 11
9 Parameter setting ...............................................................................................12
9.1 General parameter setting............................................................................12
9.2 Configuration of the display (optional)..........................................................14
9.3. Setting of the output signals for OUT1 ........................................................14
9.3.1 Setting of the output function...............................................................14
9.3.2 Setting of the switching limits ..............................................................14
9.4 Setting of the output signals for OUT2 .........................................................14
9.4.1 Setting of the output function...............................................................14
9.4.2 Scaling of the analogue value .............................................................14
9.5 User settings (optional) ...............................................................................15
9.5.1 Zero point calibration...........................................................................15
9.5.2 Setting of the delay time for OUT1 ......................................................15
9.5.3 Setting of the error behaviour of the outputs .......................................15
9.5.4 Setting of the switching logic for OUT1 ...............................................15
9.6 Service functions ..........................................................................................15
9.6.1 Reading of the min/max values for the system temperature ...............15
9.6.2 Reset of all parameters to factory setting............................................15
