In-situ Aqua TROLL User manual

Aqua TROLL Quickstart Guide
Instrument &Accessories
1. Aqua TROLL 100 or 200 instrument
2. Rugged Twist-Lock Cable
3. Wireless TROLLCom or USBTROLLCom
4. Bluetooth-enabled mobile device or Windows PC
Getting Started
1Connect the instrument to TROLLCom communication device.
Wireless TROLL Com Users USB TROLL Com Users
A. Connect Rugged Cable to
Wireless TROLLCom and
instrument.
B. Instrument is ready to pair with
software. Turn on the Wireless
TROLLCom.
A. Connect Rugged Cable to
TROLLCom and instrument.
B. Plug TROLLCom into PC.
Information subject to change without notice. In-Situ, In-Situ logo, Baro Merge, BaroTROLL, HERMIT, HydroVu™, iSitu, Pocket-Situ, RDO,
RuggedCable, RuggedReader, SmarTROLL™, TROLL, VuSitu, and Win-Situ are trademarks or registered trademarks of In-Situ Inc.©. All
rights reserved. This product may be covered by patents identified at www.in-situ.com/patents
0056102 | 2019-04-30

2
2Connect to the software.
Option 1: Connect to the VuSitu mobile app (recommended)
Download the VuSitu mobile app from the Google Play Store at play.google.com.
A. Turn on the Wireless
TROLLCom and open
VuSitu mobile app. Select
Choose or Add a Device.
B. Select Add New Device
when connecting for the
first time.
C. Locate the serial number
under the yellow lid of the
Wireless TROLLCom.
D. From device's Bluetooth
Settings screen, tap serial
number of TROLLCom to
connect. Tap the back
button.
E. Tap the serial number of
your Wireless TROLLCom.
F. VuSitu will display the
Connected Instrument
screen.
VuSitu's on-screen instructions will guide you through instrument calibration, live
readings, log setup and data sharing.
See next page for additional software options.

3
Option 2: Connect to Win-Situ on a PC via USBTROLLCom
A. Open Win-Situ. Select No
when asked Connect to
device now?
B. Choose Preferences
>Com Settings from menu
bar. Select Serial
Communications radio
button. Click check mark
button.
C. Click the yellow connect
button at the bottom right
of the screen.
D. Click Yes if prompted to
sync device time with local
system.

4
3Learn more.
Before deploying your instrument, calibrate it using the on-screen instructions in VuSitu or Win-Situ. You can then create
sites to associate with your data, set up logs and start recording information.
Download the product manual from www.in-situ.com for complete instructions.
Authorised distributor
In Australia:
For customer service, call 1300-735-292
To email an order, ordersau@thermofisher.com
To order online: thermofisher.com
In New Zealand:
For customer service, call 0800-933-966
To email an order, ordersnz@thermofisher.com
To order online: thermofisher.com