In-situ ChemScan RDO-X User manual

Install the RDO cap and attach the instrument to a
Wireless Rugged TROLL Com.
The RDO-X is factory calibrated, but you can
perform a calibration at any time with VuSitu. Select
Calibrations from VuSitu’s menu. Follow the on-
screen instructions.
Use the VuSitu mobile app to pair your Wireless
TROLL Com with your mobile device.
Select Live Readings to view real-time readings from
the instrument.
Part numbers: 200036 (RDO-X with 10m cable); 200035 (RDO-X with 5m cable) 2021-09-17 | 2000382

1-970-498-1500
2
www.in-situ.com
Kit #200036
1 RDO-X with 10 meter cable
Kit #200035
1 RDO-X with 5 meter cable

1-970-498-1500
3
www.in-situ.com
Flat
Install the RDO cap.
Align the RDO cap so the flat edge on the inside
matches up with the flat edge on the sensor. Slide
the RDO cap into place.
Slide the nose guard into place and thread it
clockwise to install.
Connect the instrument to a Wireless TROLL Com.
Attach the RDO-X’s twist-
lock connector to the end
of the Wireless TROLL
Com.
Make sure the flat edges
of the connectors align,
and then push and twist.
You will hear a click when
the cable is connected
properly.
Press the power button
on the Wireless TROLL
Com.

1-970-498-1500
4
www.in-situ.com
Pair the Wireless TROLL Com with your mobile device.
An iOS device
automatically connects
to the closest In-Situ
instrument.
To connect to another
instrument, press
Disconnect and then
Choose or Add Device .
VuSitu displays a list of
available connections.
Connect .
The app locates and
displays nearby In-Situ
devices.
Configure and deploy the RDO-X.
Tap the serial number
of the instrument or
Wireless TROLL Com.
VuSitu displays the
Connected Instrument
screen when pairing is
complete.
Rio Refugio 9648 - Parque de Negocios ENEA, Pudahuel, Santiago ~ CHILE
Tel. [phone] • www.yalitech.cl
from the menu to get started.