In-situ Aqua Troll 400 User manual

Aqua TROLL 400 Quickstart Guide
51-970-498-1500 2019-03-22 | 0090340
Getting Started
1 Install the sensors.
Twist the restrictor o the
probe.
Remove the orange plug
from the pH/ORP sensor
port.
Twist the restrictor back
onto the probe.
Use the alignment marks
to properly align the
pH/ORP sensor with the
port connection, and
press rmly into place.
Push until the sensor is
completely inserted into
the port.
Locate the RDO sensor
cap container and
remove the cap.
Remove the dust cap
from the RDO sensor.
Align the slotted edge of
the RDO cap with the at
edge of the RDO sensor.
Press the cap rmly into
position.
Required Components
1 Aqua TROLL 400 instrument
2 Wireless TROLL Com
3 Rugged Twist-Lock Cable
4 Bluetooth-enabled mobile device

61-970-498-1500 www.in-situ.com
2 Connect to the communication device.
Connect Rugged Cable to
the Wireless TROLL Com
and instrument.
Instrument is ready to
pair with software. Turn
on the Wireless TROLL
Com.
3 Connect to the software.
Download and install the VuSitu mobile app from the Google Play store. Visit play.google.com
on your Android device.
Turn on the Wireless
TROLL Com and open
VuSitu mobile app.
Select Choose or Add a
Device.
Select Add New Device
when connecting for the
rst time.
Locate the serial number
under the yellow lid on
the Wireless TROLL Com.
From device's Bluetooth
Settings screen, tap
serial number of Wireless
TROLL COM.
Tap mobile device's back
button and tap serial
number from list.
Tap mobile device’s
Back button to view
Connected Instrument
screen.

71-970-498-1500 www.in-situ.com
VuSitu’s on-screen instructions will guide you through instrument calibration, livereadings, log
setup and data sharing.
4 Learn more.
Get complete instructions about calibration, logging and working with data in the product manual.
Download it from www.in-situ.com.