Indiana Furniture Isla Series User manual

www.Indianafurniture.com
Isla Table Installation Instructions 2298-37801 Page 1
Parts List:
Table Leg
L-Bracket, 8.95"L X1"X1", Alloy
Screw #6 X 1/2 PPH DT Zinc
Screw #10 X 7/8 PPH Zinc
Lag Screw 7MM x 40MM BW Joint Connector
Screw #8 X 2 PPH DT Black
Black Levelers
Isla Table Installation
Step 1: Screw 2 L-Brackets to back panel with ½” screws using pre-drilled locations.
Step 2: Screw 2 L-Brackets to back panel with ½” screws…Flush to bottom edge on back
side for mounting to Chair later
L-Brackets(Step 1)
L-Brackets Flush to bottom edge Back side(Step 2)

www.Indianafurniture.com
Isla Table Installation Instructions 2298-37801 Page 2
Step 3: Screw in Levelers and attach Legs using 7/8” Screws to underside of top in pre-
drilled locations
Step 4: Screw Top onto the brackets installed on back panel with ½” screws
Step 5: Attach back to chair using 2” Screws to underside Chair
Step 6: Predrill chair then attach back to chair using 40mm Lag Screws Thru Pre drilled
holes in back panel to back of Chair.
Attach top to back (Step 4) Predrill and Fasten to Chair With Lag Screws (Step 6)
2” Screws to bottom of chair (Step 5)