Indiana Furniture One 10 User manual

1
One 10: Full Top Parsons Table
Parts List:
Qty (1) Top
Qty (2) Ends
Qty (1) Trough Assembly
Hardware Included
#6 X 5/8” Pand Head Screws (For attaching L-Brackets to secure Top to the Trough)
#8 x 2” Pan Head Screws (For attaching the Tops to the black metal Suport Brackets)
2” L-Brackets (For Attaching trough to the Top)
Tools Required
(2) People
Drill with phillips screw bit
Level
2298-110PT Full Tops Parsons Table Assembly Instructions

2
Step 1: Remove the metal cord covers off of the bases by unscrewing the two pan head screws on the top and set them aside
Step 2: Using the Post and Cam placement guides, place one end of the Trough into the post located on the top of the End and tighten the Cam with a Phillps Screw Driver
Remove Cord Covers
2298-110PT Full Tops Parsons Table Assembly Instructions

3
Step 3: Repeat Step 2 on the remaining End, while keeping the Trough Assembly and the Ends Square with respect to each other.
Step 4: Place the Top on the assembly and fasten to the black metal Support Brackets using the #8 x 2” Pan Head Screws Note: Be sure to push the top all the way down prior to
fastening) Next, fasten the top to the trough using the supplied 2” L-Brackets and the #6 X 5/8” Pan Head Screws. Next re-install the Metal Cord Covers from Step 1
2298-110PT Full Tops Parsons Table Assembly Instructions