Infinity IT- 8000 Series User manual

Massage Chair 8000 Series
USER MANUAL
INFINITE THERAPEUTICS
68 Route 125
Kingston, New Hampshire 03848
U.S.A.
ph: [phone] Fx: [phone]

21
TECHNICAL SPECIFICATIONS
Product name: Massage Chair
Product Model: 8000 Series
Rated voltage: 220-240V~
Rated frequency: 50/60 Hz
Rated power: 260W
Safety design: Class I
Thank you for your purchase of this product. Before using, please read
this USER MANUAL carefully, and pay special attention to the safety
precaution to ensure proper o peration and use.
Please keep this USER MANUAL properly for further reference.
CONTENTS
SAFETY PRECAUTIONS--------------------------------------------------- 1
NAME AND FUNCTION OF EACH COMPONENT----------------------- 3
Exterior structure------------------------------------------------------- 3
Interior structure--------------------------------------------------------- 3
Power supply box------------------------------------------------------- 4
Instruction on each component of main controller---------------5
Function description on buttons------------------------------------- 5
Description on VFD displayer----------------------------------------- 8
Functions and features ------------------------------------------------ 10
PREPARATION BEFORE USING------------------------------------------- 11
Installation position---------------------------------------------------- 11
Installation method----------------------------------------------------- 12
Move method------------------------------------------------------------- 18
Turn on power supply--------------------------------------------------- 18
Chair adjustment-------------------------------------------------------- 18
Before sitting down----------------------------------------------------- 18
User selection------------------------------------------------------------ 18
PRODUCT STORAGE AND MAINTENANCE----------------------------- 19
TROUBLESHOOTING------------------------------------------------------ 20
TECHNICAL SPECIFICATIONS-------------------------------------------- 21

1
1
2
3
4
5
6
7
8
20
SAFETY PRECAUTIONS
Safety Precautions
Before using, please readthisSAFETY PRECAUTIONScarefully to
ensure proper operation.
The followingSAFETY PRECAUTIONSis of great help to your correctly
use of this massage chair.
To clearly indicate the degrees of danger and damage, the classes of
accidents caused by incorrectuse are classied intoWARNINGand
CAUTION , instructions marked as followings should be strictly
followed:
WARNING
Improper operation may cause injury to users.
CAUTION
Improper operation may cause users injury or
product damage.
Forbidden. Specic instruction will be indicated in the diagram
drawings.(e.g, the left drawings means disassembly is not allowed.)
Compulsory Specic instruction will be indicated in the diagram
drawings.(e.g, the left drawings means to disconnect the power plug)
WARNING
COMPULSARY
We recommend that those with any of the following
conditions should consult a doctor beforeusing.
1. Those whoare using electronic
medical instrument imbeddedin
the body, such as cardiac
pacemaker etc.
2. Those thatare being treated by
doctors, especially those who feel
uncomfortable.
3. Those whoare malignant tumor
patients, heart disease patients,
acute patients.
4. Womenwho are pregnant
or menstruating.
5. Those withosteoporosis o r
fracture spine.
6. Those withskin disease or
those whose skins are
injured.
7. Those whosebody
temperature isover 100
degrees F. (Febrile Phase).
Do not allow the mentallydisabled to use the chair alone. (It is
OK under supervision)
Do not allow children play on massage chair.
Do not allow more than one person to use this massage chair at a time.
If the powercord or power plug becomes damaged inany way
you must disconnect from themain supply immediately and
consult an authorized service engineerfor repair orreplacement.
Do not damage, process, excessively bend, pull hard, twist or knot power cord.
Juveniles are not allowed to use this product.
PROHIBITED
Anyone else, except maintenance personnel specied by our company,
should not disassemble, maintain, or remodel this massage chair. If any
problem, please contact local dealer immediately.
NO DISASSEMBLY
TROUBLESHOOTING
No.ProblemPossible CauseSolution
You hear a whiring
The machine can
or rubbing sound.
not be started up.
Some music can not
be played normally
Alarm sound is
heard when
pressing the music
control button.
No sound from
the speaker or
earphone
It is anormal sound made
by the working motor or
the sound isproduced when
the massage ballis rubbed
against the cloth cover.
The power supply plug is
detached.
The power supply switch is
not turned on.
The fuse of massage chair
blew out.
To checkwhether the format
of music is MP3.
The U-disk isnot connected
well.
The U-disk isinitializing
The format of music les in
U-disk is notunmatched.
The volume is turned to lowest.
The waiting time of the
massage chair is over 2 hours.
It is normaland no
need for treatment.
Insert the power supply
plug into the socket again.
Turn on the switch
Replace a new one
with the same mode
Replace theMP3
music le
Insert the U-disk again.
Wait 5-10 seconds
Tocheck MP3 music les
with the help of computer.
Turn thevolume up
Press the button again
Reduce the pressure
on backrest or legrest.
To clear the airtube
Cut o the powersupply
and start up themachine
again to check whetherit
can return to normal,if
not, please send it to the
professional maintenance
center for repairand
maintenance.
If abnormal phenomenon still remains after above measureshave been
taken to the massage chair, please contact local distributor for repair and
maintenance.
Note: Do not dismantle the product by yourself, and our company shall
shoulder no responsibility to the damage of the product or the injury of
people caused by improper use! Thank you for your cooperation.
Backrest or legrest
can not ascend or
descend.
Over pressureis put on
backrest or legrest.
The airbag installed
at seat cushion or
legrest can not work.
Some fault code (
E0-E7 ) is displayed
while the main
controller is buzzing.
The massage chair has
automatically detected
some exception.
To check whether there is air
tube blockage.

219
SAFETY PRECAUTIONS
CAUTION
Please do notcontinuously use the massage chair over20 minutes,
or limit a massageto a particular partof body for more than 5 minutes.
Please put the massage chairon at ground for use.
When adjusting thelegrest or backrest, please donot exert
excessive force onit; in addition,keep children and pets wellclear.
When removing power plug, please hold theinsulation plug, do
not pull power cord.
Please do not use the power supply that is beyond the specied electric
voltage, as this may cause re disaster or damage massage chair.
Before using, please uncover the back cushion to check whether backrest
or fabric is damaged; if damaged, please stop using this massage chair
immediately, and contact franchiser for repair immediately.
Please do not operate the controller with damp hands, and do not
put heavy objects on controller.
Weight limit is 264 lbs.
Please do not use other therapeutic equipments togetherwith
this massage chair.
During use, if you feel uncomfortable,please stop use immediately
and consult your doctor.
This massage chair is designed and intended for non commercial
household use only, do not use the massage chair for medical treatment.
The massage chair isequipped with heating function,so people who
are insensitive to heat must use itcarefully.
Always switch o power and removethe plug from themains socket
immediately after useand before cleaning.
COMPULSARY
PROHIBITED
To avoid causing discomfort, do not use the massage chair immediately after meals.
Do not fall into sleep on massage chair,when the massage chair is working.
Do not use the massage chair whenyou are drunk or feel bad.
If the upholstery becomes dirty, please use onlyknown good quality
leather cleaner, do not usechemical cleaners, petrolor detergents
etc, and do notspray pesticide onit.
Do not sit on backrest, legrest, or armrest to avoid accidental injury or machine fault.
Please do not smoke while using themassage chair.
REMOVE PLUG
Before maintenance,please pull out power plug. Inaddition, please
do not insertor unplug the power plug withdamp hands, toavoid
electric shock.
When the massagechair is notin use, pleaseswitch o power and
remove the plugfrom socket. When power is o, please cuto
power supply immediately and pullout the powerplug from socket.
PRODUCT STORAGE AND MAINTENANCE
Please twist the cottoncloth which has been dipped in neutral detergent
before wiping the back cover, hand rest, legrest, airtube and some other
plastic components,then use a dry cotton clothto wipe them again.
Use dry cloth to wipe the controller,DVD, and power supply box.
Use a piece of cloth that has been dipped with neutral detergentto wipe
the back cushion and pillow,then use a piece of wet cloth to wipe them,
and nally putthem to a well-ventilatedplace for natural drying.
Maintenance
Make sure to pull out the power supply plug before
maintenance. Do not use wet hands to pull out the plug to avoid
electric shock. When cleaning the back cover, please be cautious of
detergent enteringinto the power supply box!
Do not use abrasive cleaning agents like benzene or thinner to
clean the product, otherwise, the color of upholstery may fade or
the massage chair may crack or be eroded.
Do not iron the upholstery.
Caution
Storage method
Wipe o dust and dirt from the product after use, if the product is not to
be used for a long period of time, please coverthe product with a dust
cover (selfprovided).
Caution
Do not store the product under direct sunlight or in places of high
temperature. Thismay cause the color of the upholstery to fade.
Gentle reminder
During daily use, please check whether the following symptoms exist:
Scorched smell exists.
When handling the power cord, the power does not cycle on then o.
The power supply cord is hot.
Any otherther abnormal symptoms
Caution
Please stop using the massage chair to avoid breakdowns and
accidents from occurring, if anyof the above symptoms exists.
Immediately turn o the power supply switch and pull out the power
supply plug, then contact the local distributors or headquarters for
repair and maintenance.
Except for normal operation and maintenance as mentioned above,
all other repairs and maintenance must be diagnosed and performed by our
authorized dealeror service agent.

3
18
PREPARATION BEFORE USING
Machine Adjustment
Put the backrest to a limiting position, raise the legrest to the highest
position and stretch it out to the longest position with the controller,
meanwhile, pleasemake sure sucient space is left for the massage
chair.
After testingeach function, please reset the chair, and turn o the
power supply switch.(Please refer to Buttons function on Page 5 and
VFD display on Page 8 while you are choosing massage program)
Based on your physical condition and the massage time you require,
you can choose any of the following automatic procedures toenjoy
targeted service.
Before sitting down
Make sure the leg massager is well connected with the main chair.
Before sitting down, make sure all the components are back to their
original position, if not, pleaseturn on the power supply switch and
reset the components.
Caution
Do not sit on the massage chair when the legrest is raising.
Do not put heavy burden onto the legrest suddenly,otherwise, the
mechanical structure may be damaged.
User selection
Recovery: It is suitable for doing it after work or one hour later after
supper to help people recover theirspirit.
Extend: It is suitable for oce workers or drivers.
Relax: It isa kind of leisure massage; especially suit for morning or
noon relaxation.
RefreshIt is suitable for alleviating the sore or pain at back, waist or
neck. It can massage at a particular sore or pain part of body
with semiautomatic functions.
NAME AND FUNCTION OF EACH COMPONENT
Exterior structure
Sound box
Armrest cover
Caster
Controller
Controller holder
Seat cushion
Leg rest
Pillow Cushion
Back cushion
Interior structure
Heating on
the back
Massage mechanism
Seat twisting
unit
Airbag massage unit for head
Airbag massage unit for shoulder
Airbag massage
unit for arms
Airbag massage
unit for buttocks
Airbag massage
unit for Leg
Rolling massage
unit for Sole
Airbag massage
unit for waists
Airbag massage
unit for feet

417
NAME AND FUNCTION OF EACH COMPONENT
Power supply box
Power on/o
Safety fuse
Power supply socket
Controller port
Caution:
Do not let children play on the chair in of accident happens
due to the power supply box.
Please powero the chair and unplug the chair from the power
supply socket after the massage nishes
Do not use the chair during thunderstorms.
Please powero the chair and unplug the chair from the power
supply socket when the chair is not in use, so that children won't
accidentally get the chair started.
Please storethe chair if it is not in use for a long time.
Please do not move the massage chair on easily damaged surfaces,
such as wooden oor andcarpet.
Do not use the massage chair in damp environment to avoid
electric leakage or electric shock.
Do not place the massage chair near stoveor where it will be
exposed to strong sunlight for long periods as this may damage the
leather and bleach the color.
PREPARATION BEFORE USING
Do not move the chair while people are sitting on the chair.
When moving the massage chair, please hold its base and backrest
instead of its armrests (at least 4 people).
Move method
Caution
The equipment can be easily moved with the caster installed at the
bottom of the product.
Ascend the backrest to the highest position.
Turn o the power supply switch and pull outthe plug.
Raise the front part of the chair as shown on the picture below, and
move the chair to a desirable place.
Turn on power supply
Before starting up the machine, please make sure the power
supply cord and exposed electric wire have not been damaged.
Before putting the plug into the power supply socket, please
make sure the power supply switch is turned o.
Put the power supply plug into a well
grounding three-core power supply socket.
Turn on the power supply switch located at
the bottom of backrest.
Caution

5
16
PREPARATION BEFORE USING
Step 6 Installation of back cushion and buering cushion
Zipper Plug of the heater
Step 7 Installation of seat cushion
Place the seat cushion on the seat shelf, and x the air tube .
Connect cloth on the seat cushion with the linking tape.
Step 8 Other accessories
Connect the controller,wire to respective jack on the power
supply box.
Place the controller in the tray.
Connect the power and switch on the chair, use the controller to
return the back rest to normal position.
Air tube
NAME AND FUNCTION OF EACH COMPONENT
Instruction on each component of main controller
Function description on buttons
Press this key to turn on/o heating function on back and
waist.
Keep pressingthis key to adjust backrest and legrest to a
desirable position.
Keep pressingthis key to adjust legrest to a desirable position.
When the massage program is in POINT mode, keep Up or
Down button pressed to pinpoint massage position.
When the body sensing is on and the indicating light for
shoulder adjustment is on, press Up and Down button to
pinpoint shoulder position.
Press this button to turn on or o the waist twist massage, and
the relevanticon will brighten or go out.
When waist twist massage is under working, press this key to
choose proper intensity within 1-3 degree. Under max intensity
degree, pressthis key to stop this function.
(Notice: When the icon is ashing, it is the fault prompt.)
Air tube connector
Fix the buering cushion and back cushion on the backrest with
zipper, and install theheater accessory on the back cushion, connect
the connector of pillow and waist' s air tube as the illustration shows.
Connect the lower part of the cushion with seat cushion by linking
tape.
STRENGTHMODEWIDTHPAR T
ZERO GRAVITYAIR BAGS
UPPER BODY
ARMS & SHOULDERS
SOLES
LEGS & FEET
RECOVER EXTEND
REFRESH
RELAX
UP/DOWN ADJUST
UP/DOWN ADJUST

NAME AND FUNCTION OF EACH COMPONENT
Pause/Play Stop Previous Next Volume- Volume+
Note: press Previous once to return to the beginning of the present episode,
continuously press this button twice to return to previous episode.
When this icon is constant on, Zero Gravity starts. ZeroGravity
includes weak and strong status, which cater for dierent
people needs. Whenyou feel the massage force is weak and
need stronger massage, please press ZeroGravity button again
for strong status. When itreaches strong zero gravity, press
this button againto cancel zero gravity. The chair returns to
original position whenit is inregular massage modeand the
Zero Gravityicon is o.
RecoverRecover autofunction on
When this icon is o, press this button to start thewhole auto
program, which is mainly forstrong massage on big scope.
When the icon is constant on, thechair is inRecover mode.
When this icon is ashing, all massage functions are not available.
Press this button to start massage, and then all massage function
buttons are ashing for choice. Press anyone of these to start
massage, whose defaulted time is 20mins.
When this icon is constant on, press this button to end all
massage functions, the chair goes back to its original position.
When this icon is o, all buttons on the controller are not available.
Power button: Massage chair on/o
RelaxRelax auto functionon
When this icon is o, press this button to start the whole auto
program, which is mainly for moderatestrength massage on
whole body.
When the icon is constant on, the chair is in Relax mode.
Remark: This program has air pressure massage of pillow.)
When this iconis o,and massage function is already on,press
this button to start airbags massage mode.
When this iconis constant on,press this buttonto end airbags
massage.
Remark: In automatic program, the airbags and roller is linked.)
RefreshRefresh autofunction on
When this icon is o, press this button to start the whole auto
program, which is mainly for moderatestrength massage
on big scope.
When the icon is constant on, the chair is in Refresh mode.
Remark: This program has stretch massage.)
615
PREPARATION BEFORE USING
Step 4 Installation of the speaker
Open the screw cap cover on the speaker; insert the line from upper
side of backrest to the line from the speaker, then aim the speaker to
the hole on upper side of the backrest, andfasten them by screws.
(It is the same installationmethod for the other side)
Connecting line
Screw cap cover
Step 5 Installation of controller holder
Take o the small cover on the left armrest
Aim the installation hole of the controller holder to the hole on
armrest, and thenfasten them together by screws, lastly place the
small cover.
ExtendExtend auto functionon
When this icon is o, press this button to start thewhole auto
program, which is mainly forweak massage on big scope.
When the icon is constant on, thechair is inExtend mode.
AIR BAGS

Caution:
Every auto programhas lots of massage action on shoulder. The chair
conducts body shape sensing on the initiation of auto program (or after
electric cylinder position is adjusted), so the user has to sit well on the
chair at this momentuntil body shape sensing finishes. (i.e. shoulder
adjustment on VFD display stops flashing).
To better adapt to the environment, the controller of this chair has dynamic
sampling. Within 5 secondsafter the chair powers on, please don't use hand
or other metallic substance to touch controller display; otherwise it will
affect its button sensitivity.
7
14
PREPARATION BEFORE USING
Coupling shaft
Step 3 Installation of leg massage shelf
Insert the leg connection wire plug to its jack.
Connect air tubefrom the leg massage shelf with its port on the seat
shelf.
Aim the coupling shaft port on the legmassage shelf to the coupling
shaft on the seat and fasten them with one screw each side.
Paste the folding PU cover on the leg massage shelf with linking tape
on the cloth of the seat.
Air tube port
Connection wire
plug
Air tube
Connection wire
Screw
Coupling shaft
Press this key to turn on/off rolling massage function on sole
When the indicatorlight is off, press this key,the light will turn to flash
status, then interval rolling massage on sole is started and press twice,
the indicator lightwill be constantly on, then continuous rolling
massage on sole is started, press it the third time, rolling massage on
sole will be turned off. When the indicatoris flashing or constantly on,
the Product is under rolling massage on sole
Remark: In automatic program, the airbag and roller is linked.
When the indicator light is constantly on, press this key to choose
strength among weak, medium and strong.
When the indicator light is off, this key is not operable.
Arms & shoulders, upper body, legs &feet
When massage functionis under manual mode, if the indicator light is off,
press this key to open turn on the corresponding function, then theindicator
light will beon.
When the indicator light is off, if massage function is under working,
press this key to switch to manual mode.
When the indicator light is on, press this key to circularly choose
kneading, pummel, kneading $knocking, knocking, shiatsu and
rhythm massage.
When the massage functions are under manual mode, the indicator
light is constantly on, this key is operable, press it to circularly choose
6 different speeds.
When the indicator light is off, this key is not operable.
When the massage functions are under manual mode,the indicator light
is constantly on, this key is operable, press it to circularly choose narrow,
medium and wide, andwidth of the crank arm correspondingly change.
When the indicator lightis off, this key is not operable.
When the massage functions are under manual mode, theindicator
light is constantly on, this key is operable, press it to circularly choose
full, partial and point, and the back massage mechanism
correspondingly conductfull, partial and point mode massage.
When the indicatorlight is off, this keyis not operable
ARMS & SHOULDERSARMS & SHOULDERS
UPPER BODYUPPER BODY LEGS & FEETLEGS & FEET
When the indicator light is constantly on, press this key
to stop corresponding airbag massage function.
NAME AND FUNCTION OF EACH COMPONENT

813
PREPARATION BEFORE USING
The connection of armrest locks with backrest.
Hold up the rear part of the armrest, pushinward to let the gap of
armrest lock aim at armrest spindle, then push the armrest to fasten
them together.(Press downward the handle of the lock to unlock
armrest and backrest)
Armrest lock Handle of thelock
Make sure the 4 connection sticks completely inserted into the
eccentric joints, then use cross screwdriver to fasten the armrest by
turning 180 clockwise.( The sharppoint on the eccentric joint shall
point downward ) It is the same installation method for the
other armrest.
The connection of
eccentric joints
123456
7
8
9
10
NAME AND FUNCTION OF EACH COMPONENT
1.Time display: It shows working time upon the start of massage with
defaulted time of 20 minutes.
2.Recovery indicator
3.Refresh indicator.
4.Extend indicator
5.Relax indicator
Under the massage modes: Recovery, Refresh,Extend or Relax, the icon
will be on, but not under other modes.
6.Shoulder position adjustment indicator
During body shape sensing, afterit automatically senses on the back part
of shoulder, this area is lighted to remind the user to micro adjust shoulder
poison by Shoulder Up/down adjustment
7.USB Flash diskconnection indicator
8.MP3 Volume indicator
9.Massage modes: to show present massage mode
VFD display description
10.Zero Gravitycylinder performance indicator: lie upwards;return
downwards.
11. Rolling masage on soleindication
12. Body sensing status indication
13. Part of airbag massage dynamical indiction
14. Massage dynamicalindication
Kneading ,tapping ,sync ,knocking ,shiatsu , music
15
16
17
18
19
20
11 12 13 14 22 21

9
12
PREPARATION BEFORE USING
Installation method
Step 1: Take out the components of massage chair
Open the main carton, and take out the quilting product packages,
accessory carton and the main body of the massage chair carefully.
Check whether the components are complete (please check one by
one accordingto the packing list)
Step 2: Install left and right armrests
The connection of armrest and armrest shelf: Aim thethree connection
sticks of armrest to the three eccentric joints on the armrest shelf, then
press downwards on the armrest and fasten it by the eccentric joint.
(If the rear screws are hided by back cover, so they can'tbe fastened,
please power on the chair to raise the back). It is the same installation
method for theother armrest.
Armrest
Armrest shelf
Eccentric
joint
connection
stick
clockwise
fastening
Eccentric joint structure
connect air tube port under the armrest to its corresponding output
air tube. (It is the same way for the other side)
Air tube port
Air tube
15. working indicator of reclining motor for backrest and legrest
16. back massage position mode:
Full back massage: coverthe entire back
Partial back massage: centralized as current massage point,
the massage range takes up one third of the full back
Fixed point massage: under manual mode, choose fixed point
massage to repeat the current massage technique or previous
ones.
17. back massage width indication
3 width adjustable: narrow, medium, wide
18. back massage speed indication
6 degrees adjustable
19. Vibration(twist) strength indication
3 degrees adjustable
20. Airbag intensity indication
5 degrees adjustable
21. back heating indication
22. seat twist indication
narrow, medium, wide
NAME AND FUNCTION OF EACH COMPONENT

50cm40cm
10 11
Massage chair
Carpet
Floor
Surrounding environment
Keep the massage chair away fromdamp places (for example:
bathroom) to avoid electric leakage.
Earthing
This massage chair is a LevelOne electrical appliance, make sure
to use three-core powersupply socket and to guarantee the ground wire
connected to the power supply socket has obtained good ground
connection to avoid electric leakage, electric shock and some other
negative eect during use.
Installation position
Safety distancefor the periphery of massage chair
The horizontal interval of backrest between the highest and lowest
points should be over 50cm.
The horizontal interval of legrest between the highest and lowest
points should be over 40cm.
Floor protection
The oor maybe worn by the massage chair, so it is advised to put
some cushion material (for instance: a carpet) under the massage
chair to protect the oor.
Keep the massage chair away fromhigh temperature sources (for
example: stove)to avoid re or damage to leather material.
PREPARATION BEFORE USING
1.shouler position
shoulder detectingfunction can locate exact position of shoulders of
dierent people, thus to ensure the most eective massage on shoulder
and neck.
2.Zero gravity
Abiding and imitating principle of space capsule, the Product can give
fully relax and most comfortable massage posture, i t conforms to
ergonomics and keep back, buttocks and legs in a weightless status,
thus to ensure people on the Product lay in a most relaxedreclining
angle, then weight of body will fullybe released on the Products,
muscles will also be in a completely relax condition, from which people
can enjoy weightless massage experience.
3.Four-wheel massage mechanism
Innovated design of four wheels massage mechanism and walking
structures, i t conforms to ergonomics.
4.6 massage strengths
Under manual mode & anto mode, 6 massage strengths are optional,
people can choose the most desirable one according to health condition
and massage time.
5.airbag pressure massagefor arms
upper and lower airbags design to realize wavelike massage on arms.
6.Shoulder massage
Side airbags installed on both sides of shoulders, it can give air pressue
massage on shoulders.
7.air pressure massagepillow
Pillow airbags can conduct swinging and kneading massage on neck.
8.Waisttwist and airbag massage on seat
Waist twist function in seat, airbag pressure massage on thigh and
waists.
9.Airbags pressure massageon leg and feet, rolling massage on sole
Multi-layer airbag design to ensure quick and abundant massage on leg
&feet, three rows o f rollers located under sole to conduct shiatsu
massage on sole, arch and hell offeet.
10.Mp3 & DVD (optional)
Mp3 function, DVD is optional as per requirement of customer.
11.Touchkey
Controller is adopt to touch key, it looks more fashional.
FUNCTIONS AND FEATURES