Innovative Technology NV200S Spectral User manual

Doc: User Manual NV200
Spectral Version: 2.1

User Manual –NV200 Spectral
<< Back to Contents
Copyright © Innovative Technology Ltd 2019 Doc: User Manual NV200 Spectral
Version: 2.1
Page 1 of 95
Document Name:
User Manual –NV200 Spectral
Document Version:
2.1
Date of Release:
07/03/2019
TABLE OF CONTENTS
1DOCUMENT INTRODUCTION ..................................................................................................................5
1.1 RELATED DOCUMENTS ..............................................................................................................................5
1.2 MANUAL AMENDMENTS ...........................................................................................................................5
1.3 COPYRIGHT ............................................................................................................................................5
1.4 LIMITED WARRANTY ................................................................................................................................5
1.5 PRODUCT SAFETY INFORMATION .................................................................................................................6
1.6 DISCLAIMER ...........................................................................................................................................6
2PRODUCT INTRODUCTION ......................................................................................................................9
2.1 GENERAL DESCRIPTION .............................................................................................................................9
2.2 KEY FEATURES ........................................................................................................................................9
2.3 TYPICAL APPLICATIONS .............................................................................................................................9
2.4 COMPONENT OVERVIEW .........................................................................................................................10
2.4.1 NV200 Spectral Options ...........................................................................................................10
2.4.2 Bezel Options...........................................................................................................................11
2.4.3 Cashbox Options......................................................................................................................11
2.4.4 Module Options.......................................................................................................................11
2.4.5 Consumables ...........................................................................................................................11
3TECHNICAL DATA ..................................................................................................................................12
3.1 DIMENSIONS ........................................................................................................................................12
3.2 WEIGHT..............................................................................................................................................12
3.2.1 Standard Unit –No Cashbox ....................................................................................................12
3.2.2 Cashbox Options......................................................................................................................12
3.2.3 Module Options.......................................................................................................................13
3.3 ENVIRONMENTAL REQUIREMENTS .............................................................................................................13
3.4 POWER REQUIREMENTS ..........................................................................................................................13
3.4.1 Supply Voltages .......................................................................................................................13
3.4.2 Supply Currents........................................................................................................................13
3.4.3 Power Supply Guidance............................................................................................................14
3.5 INTERFACE LOGIC LEVELS.........................................................................................................................14
3.5.1 Opto-Isolated Inputs ................................................................................................................14
3.6 RELIABILITY DATA ..................................................................................................................................15
3.7 MEDIA REQUIREMENTS...........................................................................................................................15
4MECHANICAL INSTALLATION ................................................................................................................16
4.1 COMPATIBILITY .....................................................................................................................................16
4.1.1 Hardware Compatibility...........................................................................................................16
4.1.1.1 Machine Mounting .......................................................................................................................16
4.1.1.2 Machine Interfacing......................................................................................................................16
4.1.1.3 Power Supply................................................................................................................................16
4.1.2 Software Compatibility ............................................................................................................17
4.1.2.1 Interface Protocols........................................................................................................................17
4.1.2.2 Re-programming...........................................................................................................................17
4.2 BEZEL MOUNTING .................................................................................................................................18
4.2.1 Bezel Fitting.............................................................................................................................18
4.3 CASHBOX REMOVAL &OPENING...............................................................................................................19
4.3.1 500 Note Cashbox....................................................................................................................19
4.3.2 2200 Note Cashbox..................................................................................................................22

User Manual –NV200 Spectral
<< Back to Contents
Copyright © Innovative Technology Ltd 2019 Doc: User Manual NV200 Spectral
Version: 2.1
Page 2 of 95
4.4 TEBS CASH BAG REMOVAL &REPLACEMENT ...............................................................................................23
4.5 LOCK MOUNTING ..................................................................................................................................24
4.5.1 Lock Fitting..............................................................................................................................24
4.5.2 Lock fitting –Standard Cashbox ...............................................................................................27
4.5.3 Lock Fitting - TEBS Cashbox......................................................................................................28
4.5.4 Lock Specifications...................................................................................................................28
4.5.5 Lock Cam.................................................................................................................................28
4.6 DOCKING PLATE MOUNTING ....................................................................................................................29
4.7 SPECTRAL PAYOUT MOUNTING .................................................................................................................31
4.8 LOADING PAPER INTO THE SMART TICKET ....................................................................................................33
4.8.1 Roll..........................................................................................................................................33
4.8.1.1 Top...............................................................................................................................................33
4.9 SAFE INTERFACE MOUNTING ....................................................................................................................33
4.10 MACHINE MOUNTING .......................................................................................................................36
4.10.1 Machine Mounting –Standard Cashbox ..............................................................................36
4.10.2 Machine Mounting –TEBS...................................................................................................36
4.10.3 Machine Mounting –2200 Note Cashbox ............................................................................37
4.10.4 Machine Mounting –Safe Interface.....................................................................................37
4.10.5 Earth Bonding .....................................................................................................................38
4.10.6 Screw Specifications ............................................................................................................39
4.10.7 Things to consider ...............................................................................................................39
5SOFTWARE INSTALLATION AND CONFIGURATION................................................................................40
5.1 INTRODUCTION .....................................................................................................................................40
5.2 SOFTWARE DOWNLOADS ........................................................................................................................40
5.3 DRIVERS..............................................................................................................................................40
5.4 DATASET/FIRMWARE PROGRAMMING ........................................................................................................40
5.4.1 Validator Manager ..................................................................................................................40
5.4.1.1 General Description ......................................................................................................................40
5.4.1.2 System Requirements ...................................................................................................................40
5.4.1.3 Hardware Setup............................................................................................................................41
5.4.1.4 Switching to Programming Mode (SSP)..........................................................................................41
5.4.1.5 Programming the device ...............................................................................................................41
5.4.2 SD Card ...................................................................................................................................42
5.4.2.1 General Description ......................................................................................................................42
5.4.2.2 Hardware Requirements ...............................................................................................................42
5.4.2.3 Re-programming via SD Card.........................................................................................................42
5.4.3 Remote Updates......................................................................................................................43
5.4.3.1 General Description ......................................................................................................................43
6PROTOCOLS AND INTERFACING............................................................................................................44
6.1 INTRODUCTION .....................................................................................................................................44
6.2 INTERFACE CONNECTORS.........................................................................................................................44
6.3 USER INTERFACES ..................................................................................................................................45
6.3.1.1 Dip Switches on the NV200 Spectral ..............................................................................................45
6.3.1.2 Smart Ticket Button ......................................................................................................................46
6.3.1.3 Smart Ticket Dip Switches .............................................................................................................46
6.4 SSP AND ESSP .....................................................................................................................................48
6.4.1 General Description .................................................................................................................48
6.4.2 Pin Assignments.......................................................................................................................48
6.4.3 Setup Examples .......................................................................................................................49
6.4.3.1 NV200 Spectral .............................................................................................................................49
6.4.3.2 NV200 Spectral and Smart Coin System .........................................................................................50
6.5 CCTALK®..............................................................................................................................................51
6.5.1 General Description .................................................................................................................51
6.5.2 Pin Assignments.......................................................................................................................51
6.5.3 ccTalk®DES Encryption.............................................................................................................52
6.5.4 Setup Example Drawings..........................................................................................................52
6.5.4.1 NV200 Spectral .............................................................................................................................52
6.5.4.2 NV200 Spectral with Spectral Payout Module ................................................................................52

User Manual –NV200 Spectral
<< Back to Contents
Copyright © Innovative Technology Ltd 2019 Doc: User Manual NV200 Spectral
Version: 2.1
Page 3 of 95
7ROUTINE MAINTENANCE ......................................................................................................................53
7.1 INTRODUCTION .....................................................................................................................................53
7.2 RECOMMENDED CLEANING INTERVALS........................................................................................................53
7.3 CLEANING THE NV200 SPECTRAL..............................................................................................................53
7.3.1 Cleaning the Validator .............................................................................................................53
7.3.2 Cleaning the TEBS Cashbox ......................................................................................................54
7.3.3 Cleaning the Ticket Module......................................................................................................56
7.4 CLEANING THE BUNCH NOTE FEEDER .........................................................................................................59
8FIRST LEVEL SUPPORT ...........................................................................................................................61
8.1 BEZEL/STATUS LED FLASH CODES .............................................................................................................61
8.2 NV200 SPECTRAL MODULE FLASH CODES ..................................................................................................63
8.2.1 TEBS Lock Flash Codes..............................................................................................................63
8.2.2 Spectral Payout Flash Codes.....................................................................................................63
8.2.3 Ticket Module Flash Codes .......................................................................................................64
8.2.4 Bunch Note Feeder (BNF) Flash Codes ......................................................................................64
8.3 CHECKING POWER CONNECTIONS TO THE UNIT ..............................................................................................65
8.3.1 NV200 Spectral Connections ....................................................................................................66
8.3.2 TEBS Connections.....................................................................................................................66
8.3.3 Spectral Payout Connection .....................................................................................................67
8.3.4 Smart Ticket Connection ..........................................................................................................67
8.3.5 Checking the Supply Voltage ....................................................................................................67
8.4 COMMUNICATION WITH THE HOST ............................................................................................................67
9SECOND LEVEL SUPPORT ......................................................................................................................69
9.1 OBTAINING LOGS USING SD CARD .............................................................................................................69
9.2 CLEARING A JAM FROM THE NV200 SPECTRAL .............................................................................................69
9.2.1 Note is in the note path............................................................................................................69
9.2.2 Note is visible once the NV200 Spectral has been removed .......................................................69
9.2.3 Note isn’t visible once the NV200 Spectral has been removed ...................................................70
9.3 CLEARING A JAM FROM THE TEBS CASHBOX ...............................................................................................71
9.4 CLEARING A JAM FROM THE SPECTRAL PAYOUT MODULE ................................................................................72
9.5 CLEARING A JAM FROM THE BUNCH NOTE FEEDER.........................................................................................74
9.6 CLEARING A JAM FROM THE TICKET MODULE ...............................................................................................76
9.7 CLEARING A JAM FROM THE SAFE INTERFACE MODULE ...................................................................................76
9.8 TESTING AFTER AN ERROR HAS BEEN CLEARED ...............................................................................................77
10 COMPLIANCES AND APPROVALS ..........................................................................................................78
10.1 EC DECLARATION OF CONFORMITY .......................................................................................................78
10.2 FCC APPROVAL ................................................................................................................................78
10.3 CENTRAL BANK APPROVALS.................................................................................................................78
11 APPENDIX .............................................................................................................................................79
11.1 CABLE DRAWINGS .............................................................................................................................79
11.1.1 CN00214 .............................................................................................................................79
11.1.2 CN00292 .............................................................................................................................80
11.1.3 CN00414 .............................................................................................................................81
11.1.4 CN00487 .............................................................................................................................82
11.2 DIMENSIONAL DRAWINGS...................................................................................................................83
11.2.1 GA02146 –NV200S + BNF + 80mm Safe Interface + 2200 Cashbox.......................................83
11.2.2 GA02147 –NV200S + BNF + 27mm Safe Interface + 2200 Cashbox.......................................84
11.2.3 GA02150 –NV200S + BNF + 2200 Cashbox ..........................................................................85
11.2.4 GA02151 –NV200S + BNF + 80mm Safe Interface + 500 Cashbox.........................................86
11.2.5 GA02152 –NV200S + BNF + 27mm Safe Interface + 500 Cashbox.........................................87
11.2.6 GA02982 –80mm Safe Interface .........................................................................................88
11.2.7 GA03007 –27mm Safe Interface .........................................................................................89
11.3 LOCK SPECIFICATION..........................................................................................................................90
11.3.1 Keyless Locking Cam............................................................................................................91

User Manual –NV200 Spectral
<< Back to Contents
Copyright © Innovative Technology Ltd 2019 Doc: User Manual NV200 Spectral
Version: 2.1
Page 4 of 95
11.3.2 TEBS Locking Cam ...............................................................................................................92
11.4 CONNECTOR SPECIFICATIONS ...............................................................................................................93
11.5 SWITCHING TO PROGRAMMING MODE (SSP) ..........................................................................................93
11.6 FREE FALL CASHBOX ADVICE................................................................................................................93
11.7 CCTALK DES ENCRYPTION –TRUSTED MODE...........................................................................................93
11.8 ESCROW .........................................................................................................................................93
11.9 ESCROW CONTROL ............................................................................................................................94
11.10 FILE NAMING CONVENTION.................................................................................................................95

User Manual –NV200 Spectral
<< Back to Contents
Copyright © Innovative Technology Ltd 2019 Doc: User Manual NV200 Spectral
Version: 2.1
Page 5 of 95
1DOCUMENT INTRODUCTION
1.1 Related Documents
This document should be read together with the following:
For SSP/eSSP:
Protocol Manual –SSP (GA138): SSP Interface Protocol Specification for integration
SSP Implementation Guide (GA973): Information for programmers and integrators
For CCTalk:
ITL BNV CCTalk Specification (GA966): CCTalk Integration Guide
CC2 Manual (GA863): CC2 Interface Protocol Specification for Integration
For Software:
Software Manual (GA2037) –ITL Software Guide
For other third-party interface protocols contact support@innovative-
technology.co.uk
1.2 Manual Amendments
Rev.
Date
Amendment Details
Issued by
1.0
27/04/2018
First Issue
CW
2.0
07/03/2019
Add new modules –BNF/Safe Interface / Spectral Payout
Remove Smart Payout
CW
2.1
27/03/2019
Fixed Spectral Payout Flash Codes
CW
1.3 Copyright
This manual set is Copyright © Innovative Technology Ltd. 2019. No part of this
publication may be reproduced in any form or by any means used to make any
derivative such as translation, transformation, or adaptation without permission from
Innovative Technology Ltd. The contents of this manual set may be subject to
change without prior notice.
1.4 Limited Warranty
Innovative Technology Ltd warrants each of its hardware products to be free from
defects in workmanship and materials under normal use and service for a period
commencing on the date of purchase from Innovative Technology Ltd or its
Authorized Reseller, and extending for the length of time stipulated by Innovative
Technology Ltd.
A list of Innovative Technology Ltd offices can be found in every section of this
manual set. If the product proves defective within the applicable warranty period,
Innovative Technology Ltd will repair or replace the product. Innovative Technology

User Manual –NV200 Spectral
<< Back to Contents
Copyright © Innovative Technology Ltd 2019 Doc: User Manual NV200 Spectral
Version: 2.1
Page 6 of 95
Ltd shall have the sole discretion whether to repair or replace, and any replacement
product supplied may be new or reconditioned.
The foregoing warranties and remedies are exclusive and are in lieu of all other
warranties, expressed or implied, either in fact or by operation of law, statutory or
otherwise, including warranties of merchantability and fitness for a particular
purpose.
Innovative Technology Ltd shall not be liable under this warranty if it’s testing and
examination disclose that the alleged defect in the product does not exist or was
caused by the customer's or any third person's misuse, neglect, improper installation
or testing, unauthorized attempts to repair, or any other cause beyond the range of
the intended use. In no event will Innovative Technology Ltd be liable for any
damages, including loss of profits, cost of cover or other incidental, consequential or
indirect damages arising out the installation, maintenance, use, performance, failure
or interruption of an Innovative Technology Ltd product, however caused.
1.5 Product Safety Information
Throughout this user manual, we may draw your attention to key safety points that
you should be aware of when using or maintaining the product.
These safety points will be highlighted in a box, like this:
Caution!
This is an example text.
This user manual and the information it contains is only applicable to the model
stated on the front cover and must not be used with any other make or model.
1.6 Disclaimer
Innovative Technology Ltd is not responsible for any loss, harm, or damage caused
by the installation and use of this product. This does not affect your local statutory
rights. If in doubt contact Innovative Technology for details of any changes.
Innovative Technology Ltd has a policy of continual product improvement. As a
result, the products supplied may vary from the specification described here.
Innovative Technology Ltd does not accept liability for any errors or omissions
contained within this document. Innovative Technology Ltd shall not incur any
penalties arising out of the adherence to, interpretation of, or reliance on, this
standard.

User Manual –NV200 Spectral
<< Back to Contents
Copyright © Innovative Technology Ltd 2019 Doc: User Manual NV200 Spectral
Version: 2.1
Page 7 of 95
Safety Notice! Read before using this product!
Safety Notice - Warning. Ensure power is removed before allowing access to the inside of this product.
Ensure any static build up is discharged before allowing access to any part of this product or media
contained. Always earth this product/base plate in accordance with the manual.
For use only in or with complete equipment where the acceptability of the combination is determined by
UL LLC. When installed in an end-product, consideration must be given to the following:
The power supply terminals and/or connectors are: Not investigated for field wiring
The investigated Pollution Degree is: 2
The following end-product enclosures are required: Mechanical, Fire
Equipment not investigated for accessibility to children –to be evaluated in end-user application
Sicherheitshinweis –Warnung: Es muss sichergestellt werden, dass das Gerät von der
Versorgungsspannung getrennt wird, bevor ein Eingriff in das Innere des Gerätes erfolgt. Es muss
sichergestellt werden, dass jegliche statische Aufladung des Gerätes entladen wird, bevor auf das Gerät
oder auf innerhalb des Gerätes befindliche Objekte zugegriffen wird. Die Erdung des Gerätes muss immer
gemäß Handbuch erfolgen.
Nur für die Verwendung in oder mit kompletter Ausstattung, dessen Eignung und Kombination von der UL
LLC ermittelt wurde. Bei der Installation in einem Endproduckt, muss folgendes berücksichtigt werden:
Die Spannungsversorgungsklemmen und/oder Verbinder sind: Feldverkabelung wurde nicht
untersucht
Der untersuchte Verschmutzungsgrad ist: 2
Folgende Anforderungen an die Gehäuse des Endproduktes sind gefordert: Mechanisch, Feuer
Aviso de seguridad: Asegúrese de que la alimentación está desconectada y de que toda la energía
estática es descargada antes de manipular este producto. Conecte a tierra la chapa base de la manera que
se indica en el manual.
Solo para uso con dispositivos con los cuales la compatibilidad ha sido certificada por UL LLC. Tras su
instalación en producto acabado, tener en cuenta lo siguiente:
Los conectores y terminales de alimentación son: No se ha investigado/especificado cableado
externo.
El grado de contaminación determinado es: 2
Los siguientes manuales/certificados de producto final son requeridos: Mecánico, Fuego
Avis de sécurité : Assurez-vous que l'alimentation est coupée et que toute l'énergie statique est
déchargé avant de manipuler ce produit. Connecter à la terre, la plaque de base à la manière indiquée
dans le manuel.
A utiliser Seulement avec les dispositifs dont la compatibilité a été certifiée par UL LLC. Après son
installation dans le produit fini, prendre en considération ce qui suit:-
Les connecteurs et les bornes d'alimentation sont : cela n’a pas été étudié/spécifié câblage
externe.
Le degré de contamination déterminé est : 2
Les manuels suivants / les certificats du produit final sont nécessaires : mécanique, incendie
Bezpečnostní upozornění. Před manipulací uvnitř tohoto produktu se ujistěte, že je produkt odpojen od
zdroje elektrického napětí. Ujistěte se, že jakýkoliv elektrostatický náboj byl vybit před manipulací s
jakoukoliv částí tohoto produktu nebo obsaženým médiem. Vždy uzemněte tento produkt/základovou
desku v souladu s návodem.
Pouze pro použití v nebo s kompletním vybavením, kde je přijatelnost kombinace určena UL LLC. Při
instalaci v konečném produktu je třeba zvážit nasledující:
Napájecí svorky a/nebo konektory: Nejsou sledované pro externí kabeláž
Sledovaný stupeň znečištění je: 2
Následující krytí konečného produktu jsou požadované: Mechanické, Protipožární

User Manual –NV200 Spectral
<< Back to Contents
Copyright © Innovative Technology Ltd 2019 Doc: User Manual NV200 Spectral
Version: 2.1
Page 8 of 95
Caution! –IR and UV Radiation
• Possible skin or eye damage due to
presence of IR and UV radiation internally
• Disconnect power before servicing.
• Employ appropriate PPE measures
• Follow safety precautions given in IEC
62471

User Manual –NV200 Spectral
<< Back to Contents
Copyright © Innovative Technology Ltd 2019 Doc: User Manual NV200 Spectral
Version: 2.1
Page 9 of 95
2PRODUCT INTRODUCTION
2.1 General Description
The NV200 Spectral is a highly secure and technologically advanced banknote
validator. State of the art spectral sensors offer complete note image capture by
scanning over 4.8 million data points to authenticate the validity of notes. The unit
boasts 99%+ first time acceptance of new and street grade notes with a note to
note processing time of 2 seconds.
The unit contains a number of security features including optical and mechanical
anti-strimming technology that delivers outstanding fraud protection. The NV200
Spectral’s cutting-edge note centring mechanism, together with 4-way barcode
acceptance bring the user exceptional note handling and increased ticket acceptance
rates.
2.2 Key Features
• 100% note image capture - 4.8 million data points
• 99%+ first time acceptance of new & street grade notes
• Stained note detection
• 2 second note to note processing
• Modular design - recycler or ticket printer available
2.3 Typical Applications
The NV200 Spectral validator can be used in a variety of situations where high
security and high-volume bank note acceptance and validation are needed. Some
typical applications are:
AWP and SWP applications
Self-Serve and Retail
Kiosks
Casinos
Parking and Ticketing
Vending
Retail environment.
POS Systems

User Manual –NV200 Spectral
<< Back to Contents
Copyright © Innovative Technology Ltd 2019 Doc: User Manual NV200 Spectral
Version: 2.1
Page 10 of 95
2.4 Component Overview
2.4.1 NV200 Spectral Options
ITL Part Number
Description
PA02158
NV200 Spectral Head
PA03269
NV200 Spectral with UAP

User Manual –NV200 Spectral
<< Back to Contents
Copyright © Innovative Technology Ltd 2019 Doc: User Manual NV200 Spectral
Version: 2.1
Page 11 of 95
2.4.2 Bezel Options
ITL Part Number
Description
PA00610
Standard Bezel (85mm)
PA00639
Metal Bezel
PA01038
Self-Aligning Bezel (White)
PA02053
Self-Aligning Bezel (Black)
2.4.3 Cashbox Options
*2200 note cashbox has a different chassis to the 500 and 1000 note cashbox due to the increased
size
2.4.4 Module Options
*BNF can only be used with the NV200 Spectral and UAP –PA03269.
It cannot be fitted/retrofitted to a standard NV200 Spectral
2.4.5 Consumables
ITL Part Number
Description
PA02738
500 Note Cashbox and Chassis
PA02930
1000 Note Cashbox and Chassis
PA03109
2200 Note Cashbox and Chassis *
PA02198
TEBS –Tamper Evident Bag System
ITL Part Number
Description
PA01062
Roll Top Ticket Module
PA02887
Spectral Payout Module
PA03120
Bunch Note Feeder (BNF) *
PA03007
Safe Interface (27mm)
PA02982
Safe Interface (80mm)
ITL Part Number
Description
PA02196
TEBS Safe Bag (Box of 140 Bags)
LB02012
Roll Tickets (Box of 12 Rolls)

User Manual –NV200 Spectral
<< Back to Contents
Copyright © Innovative Technology Ltd 2019 Doc: User Manual NV200 Spectral
Version: 2.1
Page 12 of 95
3TECHNICAL DATA
3.1 Dimensions
The dimensions below are for the NV200 Spectral with 500 note cashbox. Other
cashbox / module options will change the dimensions. For dimensional drawings of
other configurations contact [e-mail]
3.2 Weight
The tables below show the weights for the individual components of the product.
For example, and NV200 Spectral with Standard Bezel and 500 Note Cashbox with
Chassis would weigh 3.21Kg (1.20 Kg + 2.01 Kg)
3.2.1 Standard Unit –No Cashbox
Unit
Weight Empty
Weight Full
NV200 Spectral –Standard Bezel
1.20 Kg
N/A
3.2.2 Cashbox Options
Unit
Weight Empty
Weight Full
500 Note Cashbox with Chassis
2.01 Kg
2.46 Kg
1000 Note Cashbox with Chassis
2.19 Kg
3.09 Kg
2200 Note Cashbox with Chassis
3.15 Kg
4.99 Kg
TEBS Cashbox (Tamper Evident Bag System
6.95 Kg
7.75 Kg

User Manual –NV200 Spectral
<< Back to Contents
Copyright © Innovative Technology Ltd 2019 Doc: User Manual NV200 Spectral
Version: 2.1
Page 13 of 95
3.2.3 Module Options
Unit
Weight Empty
Weight Full
Ticket Module
1.34 Kg
2.64 Kg
Spectral Payout Module
2.30 Kg
2.36 Kg
Bunch Note Feeder
1.00Kg
N/A
Safe Interface (27mm)
527g
N/A
Safe Interface (80mm)
602g
N/A
3.3 Environmental Requirements
Environment
Minimum
Maximum
Temperature
+3°C
+50°C
Humidity
5%
95% Non-condensing
3.4 Power Requirements
3.4.1 Supply Voltages
Supply Voltage
Minimum
Nominal
Maximum
Supply Voltage (V DC)
+ 11.8 V DC / +22.6vDC
+ 12 V DC / +24vDC
+ 14.2 V DC / +26.4vDC
Supply Ripple Voltage
0 V
0 V
0.25 V @ 100 Hz
The TEBS cashbox and Ticket module require the unit is run at 24v (±10%).
3.4.2 Supply Currents
The supply current required to run the NV200 Spectral will vary during the phases of
operation and the modules attached, see the tables below for 12vDC and 24vDC

User Manual –NV200 Spectral
<< Back to Contents
Copyright © Innovative Technology Ltd 2019 Doc: User Manual NV200 Spectral
Version: 2.1
Page 14 of 95
3.4.3 Power Supply Guidance
Check the power requirements of the host machine and other peripherals to
dimension a suitable power environment for the machine setup.
The unit shall be supplied from a source specified as Electrical Energy Source Class 1
(ES1) to IEC/UL 62368-1, or specified as SELV according to IEC/UL 60950-1
TDK Lambda manufactures suitable power supplies. See table below for further
details.
Power Supply Unit
Specification
RS Stock Code
Farnell Stock Code
Suitable for use with
TDK Lambda RWS-50B-12
+12 V DC / 4.3 A
839-9626
2452725
NV200 Spectral Standalone
TDK Lambda RWS-150B-24
+24 V DC / 6.3 A
813-9103
2444003
NV200 Spectral with TEBS or
Spectral Payout Module
TDK Lambda RWS-300B-24
+24 V DC / 12.5A
813-9128
2419997
NV200 Spectral with TEBS and
Payout/Ticket Module
3.5 Interface Logic Levels
Interface Logic Levels
Logic Low
Logic High
Inputs
0V to +0.5V
+3.7V to +12V
Outputs with 2K2Ω pull-up resistor
+0.6V
Pull-up voltage of host interface
Maximum Current Sink
50mA per Output
3.5.1 Opto-Isolated Inputs
The NV200 Spectral natively supports Opto-isolated communication, the connection
requires a reciprocal circuit to be established on the host side. The pin outs for the
opto-isolated inputs can be found in Section 6.4.2.

User Manual –NV200 Spectral
<< Back to Contents
Copyright © Innovative Technology Ltd 2019 Doc: User Manual NV200 Spectral
Version: 2.1
Page 15 of 95
3.6 Reliability Data
Below is an explanation outlining the Mean Cycles Between Failure (MCBF) & Mean
Cycles Between Interruption (MCBI) for the NV200 Spectral. Where a cycle is defined
as a note/ticket either stacked, stored or paid-out. An example is if £20 is accepted
and a £10 paid out that would be classed as 2 cycles.
The difference between MCBF and MCBI is that a failure is classed as an event which
will require a service call –e.g. unit is seeing poor acceptance. Whereas an
interruption is an event which store/site staff could rectify without a trained engineer
present –e.g. clearing a note path jam.
As shown in Section 2.4 the NV200 Spectral is a modular solution and these modules
increase the complexity of the system. As such, each time one of these additional
modules are attached the current MCBF and MCBI is halved. The MCBF for the
NV200 Spectral is 200,000 cycles.
3.7 Media Requirements
The NV200 Spectral is capable of handling multiple denominations simultaneously,
the media that can be accepted includes but is not limited to: -
Paper notes
Polymer notes
Windowed notes
Barcoded tickets
The minimum and maximum dimension for media IN is as follows:
Minimum
Maximum
Length
110mm
170mm
Width
56mm
85mm
When using the optional Spectral Payout module, the media dimensions
for notes routed to the payout are as follows:
Minimum
Maximum
Length
110mm
170mm
Width
56mm
82mm
When using the optional Smart Ticket module, the paper requirements are
as follows:
Roll
Minimum
Maximum
Length
N/A
N/A
Width
80mm
80mm
General
Minimum
Maximum
Thickness
100µm
120µm
Perforation Strength
0.7kg
1.3kg

User Manual –NV200 Spectral
<< Back to Contents
Copyright © Innovative Technology Ltd 2019 Doc: User Manual NV200 Spectral
Version: 2.1
Page 16 of 95
4MECHANICAL INSTALLATION
4.1 Compatibility
4.1.1 Hardware Compatibility
4.1.1.1 Machine Mounting
Assuming the suitable bezel (and cashbox) type has been ordered the NV200
Spectral can be used as fitting replacement for the following ITL products only:
NV200
Innovative Technology Ltd. has a policy of continuous product improvement. Due to
design changes older model or product bezels (and cashboxes) may not be
compatible with the NV200 Spectral. Specifically, the NV200 Spectral head is not
backwards compatible with the NV200 cashbox and chassis.
The 2200 note cashbox also has a larger chassis which means that it is not a
suitable replacement for current installations.
However, new product deliveries always include a bezel (and cashbox) that must be
used.
Caution!
Only use bezels (and cashboxes)
shown in this manual
4.1.1.2 Machine Interfacing
By design the NV200 Spectral is pin to pin compatible with the suitable fitting
replacement products listed in Section 4.1.1.1 No changes to existing machine
harnessing are required.
4.1.1.3 Power Supply
It is vital that the NV200 Spectral is connected to a power supply able to provide the
required power environment. A weak power supply causes malfunctioning of the
NV200 Spectral such as note rejects or missing credits. If the NV200 Spectral is used
as a fitting replacement for an older model or product we recommend checking the
power supply specifications of the machine. The power supply of the machine might
be designed for the older model or product but not suitable for the NV200 Spectral.
The NV200 Spectral might have higher power consumption. Refer to Section 3.4 for
full power requirement details of the NV200 Spectral.
Caution!
A weak power supply may cause
malfunctioning!

User Manual –NV200 Spectral
<< Back to Contents
Copyright © Innovative Technology Ltd 2019 Doc: User Manual NV200 Spectral
Version: 2.1
Page 17 of 95
4.1.2 Software Compatibility
4.1.2.1 Interface Protocols
When using the NV200 Spectral as a fitting replacement for an older model or
product some events such as credits may be given incorrectly. This is due to
improved firmware routines and faster motors being used. This may cause missing
events such as credits in those host machines where timeouts are defined for the
older model or product. Contact the machine manufacturer for full compatibility of
the NV200 Spectral.
Caution!
Timing issues may cause missing
events such as credits!
4.1.2.2 Re-programming
For re-programming the NV200 Spectral always use the latest version of Validator
Manager available for download on our website. Older versions may not support the
NV200 Spectral. For further details on Re-programming the NV200 Spectral refer to
Section 5.4.
Caution!
Older versions of Validator
Manager may not support the
NV200 Spectral!

User Manual –NV200 Spectral
<< Back to Contents
Copyright © Innovative Technology Ltd 2019 Doc: User Manual NV200 Spectral
Version: 2.1
Page 18 of 95
4.2 Bezel Mounting
4.2.1 Bezel Fitting
1. Open Note Path
Pull the top latch
in the direction
shown to unlock
the note path
2. Open Upper
Note Path
When the note
path has
unlocked, lift the
upper part to give
clear access to
the front.
3. Attach Bezel
Cable
Plug the bezel
cable into the
connection socket
on the front.
Ensure that the
tab on the
connector aligns
with the notch on
the socket.

User Manual –NV200 Spectral
<< Back to Contents
Copyright © Innovative Technology Ltd 2019 Doc: User Manual NV200 Spectral
Version: 2.1
Page 19 of 95
4. Insert Bezel
Slide the bezel
down into the
slots on the front
of the bezel
5. Close Note Path
Push the upper
note path back
down until you
hear it click firmly
back into place
4.3 Cashbox Removal & Opening
4.3.1 500 Note Cashbox