Inside Weather SAVOY BED User manual

SAVOY BED

Gather Your Eggs...
Note: Please retain all boxes until you are certain that your product isn’t damaged and that you
do not wish to return it. Disposal of boxes may prevent/delay our ability to resolve your request.
Side Rails Front Legs
Back Legs
Horizontal Supports
Front Rail
Back Rail
Headboard
30mm Bolt
40mm Bolt
16mm Bolt
Side Table
and Bracket
(Optional)
Screw Caps
Drill + Long Hex Bit
Vertical Slats

Step 1: Connect Side Rails
Place cardboard on the ground to protect the floor and the bed
frame pieces. You can use the box it came in.
Gather the parts for the right side of the bed frame.
Fasten the side rails to the legs using the
30mm bolts.
Repeat for the left side.
Back Leg
Front Leg

Stand up the left and right side rails. Place the back rail
in between the side rails at their approximate spacing.
Repeat the previous step for the front rail.
Tighten the pre-placed bracket
bolts to fasten the side rails to
the back rails.
Step 2: Attach Back Rail
Step 3: Attach Front Rail

Follow the following step if you’ve
chosen the bed with side tables.
Side the metal brackets through the
slots in the side rails. Use the 40mm
bolts to fasten them in place.
Place the side table on top of
the brackets and tighten with the
16mm bolts.
Optional Step: Side Tables

Slide the horizontal slates into place.
Slide the vertical slates into place.
Step 5: Place Horizontal Slats
Step 6: Place Vertical Slats
Frame with placed slats

Slide the headboard into place and
tighten the conecting screws through the
opening
Step 7: Attach Headboard
Note: When fitting the peices together, make sure the connecting screws are
retracted inside their housing. Having the screw out could damage your surfaces.
Use screw caps to cover
the openings after all
are tightened.

Step 8: Add Your Mattress
DONE!
Add a mattress (sold seperately).