Inside Weather OTTO CHAIR User manual

OTTO CHAIR

Gather Your Eggs...
8x 50mm Screw
8x Washer
Legs
Note: Please retain all boxes until you are certain that your product isn’t damaged and that you
do not wish to return it. Disposal of boxes may prevent/delay our ability to resolve your request.
Seat
Backrest
Allen Key

Step 1: Assemble the First Leg
Place the seat upside down
on a table. Use a soft surface
to protect from scratches.
To ensure that the seat is
oriented correctly, please note
that the back screw holes are
closer to the edge of the seat
than the front screw holes and
the rear corner radius is larger
than the front.
Grab your first leg. Align the
holes in the leg with the holes
in the seat bottom.
The long arm is positioned to
the rear of the seat.
Insert the screws and washers.
Hand tighten. Do not tighten them
fully yet.
Rear
Front

Step 2: Attach Backrest
Step 3: Attach Second Leg
Connect the backrest by
aligning the pin on the leg to
the hole in the backrest.
Insert the second leg into the backrest.
Make sure the pins are fully inserted into
the backrest.

Step 4: Tighten the Screws
Insert the remaining screws to
align the legs.
Tighten all the bottom screws.
DONE!