Inside Weather SARNO DINING CHAIR User manual

SARNO DINING CHAIR

Gather Your Eggs...
10x Button Head Screw
2x Wood Screw
Legs
Seat
Seat Back
Note: Please retain all boxes until you are certain that your product isn’t damaged and that you
do not wish to return it. Disposal of boxes may prevent/delay our ability to resolve your request.
Allen Key

Step 1: Assemble the Legs
Leg Side A Leg Side B
Leg Notches
Distinguish Leg A and Leg B from their notches.
Leg B slots into Leg A
(Leg A, notch faces up. Leg B, notch faces down).
Facing the front of the chair, make sure the back
of Leg A is on the left and Leg B is on the right.
Assembled legs will criss-cross
each other
NOTE: Make sure the legs are oriented correctly.
When crossed together the legs will appear wider if
placed incorrectly.
Correct Incorrect

Step 2: Place the Seat
Place the Seat down on the
criss-crossed legs.
Push the seat all the way back into the
notches in the rear of the legs.
Hand tighten the button head screws through the
holes from the bottom. Do not fully tighten yet.

Step 3: Attach the Back
Align the holes in the Seat
Back with the tops of the legs
and cap it on.
Use the slotted wood screws and tighten into the seat back until
the screw is flush with the surface.

Step 4: Tighten the Seat Screws
Using the provided allen key,
go back and tighten the scews
on the bottom of the frame.
DONE!