Insportline VibroGym Charles User manual

USER MANUAL –EN
IN 8947 Vibration Machine VibroGym inSPORTline Charles

2
CONTENTS
INTRODUCTION..................................................................................................................................... 3
PACKAGE LIST....................................................................................................................................... 3
EXPLODED DRAWING........................................................................................................................... 4
PARTS LIST............................................................................................................................................ 5
ASSEMBLY STEPS ................................................................................................................................ 8
CONSOLE............................................................................................................................................... 9
SAFETY PRECAUTIONS...................................................................................................................... 11
MAINTENANCE AND STORING .......................................................................................................... 13
STORING........................................................................................................................................... 13
REGULAR MAINTENANCE .............................................................................................................. 14
CLEANING......................................................................................................................................... 14
PRODUCT SPECIFICATION ................................................................................................................ 14
TERMS AND CONDITIONS OF WARRANTY, WARRANTY CLAIMS................................................. 14

3
INTRODUCTION
Thank you for purchasing this product. Before use, read the entire manual carefully and retain it for
future reference.
Category SC (according EN957 standard) suitable for home and club using.
The producer keeps the right to change sticker design or material colour without having to give
a notice. All the pictures of the product (design, colour, stickers etc). are only for illustration
purposes.
PACKAGE LIST
1. Support tube
2. Base
3. Screw (M6x15)
4. Screw (M8x20)
5. Upper handrail
6. Screw (M6x45)
7. Screw (M6x30)
8. Lower handrail
9. Console

4
EXPLODED DRAWING

5
PARTS LIST
No.
Description
Qty
1
Foot cushion
1
2
Inner hexagon cylindrical screw
11
3
Washer
11
4
Footplate
1
5
Strap fixer
2
6
Switch
1
7
Socket
1
8
Metal clip
2
9
Hexagon nipples
4
10
Support frame
1
11
Base casing
1
12
Rubber ring
1
13
Bearing bushing
1
14
Deep groove ball bearing
1
15
Eccentric block
1
16
Inner hexagon cylindrical screw
1
17
Inner hexagon cylindrical screw
4
18
Spring washer
4
19
Washer
4
20
Insulation sleeve of spiral motor
4
21
Inner hexagon cylindrical screw
2
22
Spring washer
2
23
Washer
2
24
Footplate bracket assembly
2
25
Deep groove ball bearing
2
26
Vibration absorber
11
27
Whole footplate
1
28
Washer
11
29
Spring washer
11
30
Inner hexagon cylindrical screw
11
31
Washer
4
32
Spiral motor
1
33
Big washer
4
34
Spring washer
4
35
Hexagon nipple
4

6
36
Oscillation motor
1
37
Insulation pad
1
38
Hexagon nipple
4
39
Big washer
4
40
Insulation washer of motor seat
4
41
Motor seat
1
42
Insulation pad of motor seat
2
43
Washer
4
44
Spring washer
4
45
Inner hexagon cylindrical screw
4
46
Hexagon nut
2
47
Spring washer
2
48
Flat washer
2
49
Locating ring
2
50
Connecting rod axle
1
51
Connecting rod bracket
1
52
Clamp spring of axle
1
53
Connecting rod
1
54
Deep groove ball bearing
2
55
Connecting rod cap
1
56
Cross screw
5
57
Aluminium bearing sleeve
1
58
Deep groove ball bearing
2
59
Shaft
1
60
Eccentric shaft
1
61
Clamp spring of axle
2
62
Belt pulley
1
63
Clamp spring of axle
1
64
Motor belt
1
65
Cross screw
4
66
Controller (PCB)
1
67
Metal base plate
1
68
Washer
6
69
Spring washer
6
70
Inner hexagon cylindrical screw
6
71
Cross self-drilling screw
9
72
Washer
4
73
Spring washer
4

7
74
Inner hexagon cylindrical screw
4
75
Adjustable foot
5
76
Washer
4
77
Spring washer
4
78
Inner hexagon cylindrical screw
4
79
Washer
6
80
Spring washer
6
81
Inner hexagon cylindrical screw
6
82
Upper protection foam
1
83
Upper handrail
1
84
Main control panel sticker
1
85
Cross self-drilling screw
4
86
Sensor chip BMI
2
87
Main control panel
1
88
Display (PCB)
1
89
Cross self-drilling screw
3
90
Column
1
91
Cross self-drilling screw
4
92
Handrail front plastic cover
2
93
Inner hexagon disc screw
2
94
Flat washer
2
95
Inner hexagon cylindrical screw
4
96
Handrail flange plastic cover
2
97
Handrail flange protection foam
2
98
Handlebar holder
2
99
Inner hexagon screw
2
100
Flat washer
2
101
Handrail back plastic cover
2
102
Lower handrail tube
2
103
Inner hexagon disk screw
8
104
Column location pin
4
105
Washer
8
106
Lower handrail protection foam
2
107
Lower control panel
1
108
Cross self-drilling screw
4
109
Lower control sticker
1
110
Inner hexagon screw
4
111
Washer
4

8
112
Power cord
1
113
LED lower controller display (PCB)
1
ASSEMBLY STEPS
STEP 1: Take the support tube (1) and base (2) out from the package. Connect
upper and lower wire.
STEP 2: Insert the tube (1) into base (2). Secure with screws (4) and install the
foot cushion.
STEP 3: Attach the upper handrail (5) to the tube and secure with screw (8).
STEP 4: Take the lower handrail (9) out from the package and attach it using
screws (3 and 7) as shown in picture.

9
Complete the assembly. The final state is shown in the right picture. Check if all
bolts and nuts are properly tightened.
CONSOLE
UPPER CONSOLE
MIDDLE CONSOLE

10
UPPER CONSOLE
1. Use this key do switch between time and speed displaying.
2. MODE window: displays current mode (manual or automatic).
3. TIME and OSCILLATION SPEED window, that displays time countdown or oscillation speed.
Mutual switching.
4. SPEED window: it displays oscillation or spiral vibration speed. Mutual switching.
5. Increasing oscillation speed. You can increase the speed in the manual mode in range from 1
to 60 (level).
6. Decreasing oscillation speed. Push this key to decrease speed in manual mode. The lowest
level is: 1.
7. Using this key, you can set the running time of this device. It is the entire period of device
working. If it reaches this limit, it stops automatically. Set in the time following next steps:
oDefault time is 10 mins.
oAfter selecting the manual mode, push this key before starting the machine.
oUsing keys H+ and H- set required time.
oUsing keys L+ and L- set spiral-vibration time.
oAfter time adjustment push START/STOP and it starts working according the pre-set
time. If it reaches the pre-set limit, it stops automatically.
8. It is possible to adjust the speed manually in the manual mode. In automatic programs, all
runs according to pre-set time and speed. Choose mode in standby mode and push key 11 or
16 to start exercising. The device starts working in selected mode.
9. Increasing speed of spiral vibrations: in manual mode, use it to increase spiral vibration speed
from level 1 to level 60.
10. Decreasing speed of spiral vibrations: in manual mode, use it to decrease the spiral vibration
speed up to the lowest level (1).
11. Key START/STOP: starting or stopping this device.
MIDDLE CONSOLE
12. Key for mode selection in circle: HL, P1, P2, P3. Function is same as upper console.
13. Display window: actual mode or speed or time.
14. Speed increasing: use it in the manual mode to increase oscillation and vibration speed in the
same time.
15. Speed decreasing: use it in manual mode to decrease oscillation and vibration speed in the
same time.
16. START/STOP: for starting or stopping this device.
AUTOMATIC PROGRAMS
PROGRAM PROFILE P1:
Oscillation:
30 34 38 42 46 50 54 58 54 50 46 42 38 34 30 26 22 18 14 10 6 2 6 10 18 22 26
Vibration:
30 26 22 18 14 10 6 2 6 10 14 18 22 26 30 34 38 42 46 50 54 58 54 50 46 42 38
34
Time interval: 5 seconds