Intel TIGI2U - Carrier Grade Server User manual

Intel®Carrier Grade Server TIGI2U User
Guide
A Guide for Technically Qualified Assemblers of Intel®Identified
Subassemblies/Products
Order Number: D15006-004

Disclaimers
Intel®Carrier Grade Server TIGI2U User Guide
ii
Disclaimer
Information in this document is provided in connection with Intel®products. No license, express or implied, by estoppel or
otherwise, to any intellectual property rights is granted by this document. Except as provided in Intel’s Terms and Conditions
of Sale for such products, Intel assumes no liability whatsoever, and Intel disclaims any express or implied warranty, relating
to sale and/or use of Intel products including liability or warranties relating to fitness for a particular purpose, merchantability,
or infringement of any patent, copyright or other intellectual property right. Intel products are not designed, intended or
authorized for use in any medical, life saving, or life sustaining applications or for any other application in which the failure of
the Intel product could create a situation where personal injury or death may occur. Intel may make changes to
specifications and product descriptions at any time, without notice.
Intel server boards contain a number of high-density VLSI and power delivery components that need adequate airflow for
cooling. Intel’s own chassis are designed and tested to meet the intended thermal requirements of these components when
the fully integrated system is used together. It is the responsibility of the system integrator that chooses not to use Intel
developed server building blocks to consult vendor datasheets and operating parameters to determine the amount of airflow
required for their specific application and environmental conditions. Intel Corporation can not be held responsible if
components fail or the server board does not operate correctly when used outside any of their published operating or non-
operating limits.
Intel, Intel Pentium, and Intel Xeon are trademarks or registered trademarks of Intel Corporation or its subsidiaries in the
United States and other countries.
*Other names and brands may be claimed as the property of others.
Copyright © 2007, Intel Corporation. All Rights Reserved.

Preface
Intel®Carrier Grade Server TIGI2U User Guide
iii
Preface
About this Manual
Thank you for purchasing and using the Intel®Carrier Grade Server TIGI2U (Telecom
Industrial Grade Intel®Xeon™ processor 2U Server).
This manual is for system technicians who are responsible for troubleshooting, upgrading,
and repairing this Carrier Grade Server. This document provides a brief overview of the
features of the board/chassis, a list of accessories or other components you may need,
troubleshooting information, and instructions on how to add and replace components on
the Intel®Carrier Grade Server TIGI2U. For the latest version of this manual, refer to
Manual Organization
http://support.intel.com/support/motherboards/server/TIGI2U.
Chapter 1 provides a brief overview of the Carrier Grade Server TIGI2U. In this chapter,
you will find a list of the server board features, chassis features, photos of the product, and
product diagrams to help you identify components and their locations.
Chapter 2 provides instructions on adding and replacing components. Use this chapter for
step-by-step instructions and diagrams for installing or replacing components such as the
memory, processor, front panel board, the battery, and other components.
Chapter 3 provides instructions on using the utilities that are shipped with the board or that
may be required to update the system. This includes how to navigate through the BIOS
(Basic Input/Output System) Setup screens, how to perform a BIOS update, and how to
reset the password or CMOS (Complementary Metal Oxide Semiconductor). Information
about the specific BIOS settings and screens is available in the Intel®Server Board
TIGI2U Technical Product Specification. See “Additional Information and Software” for a
link to the Technical Product Specification.
Chapter 4 provides troubleshooting information. In this chapter, you will find BIOS error
messages and POST (Power-on Self Test) code messages. You will also find suggestions
for performing troubleshooting activities to identify the source of a problem.

Preface
Intel®Carrier Grade Server TIGI2U User Guide
iv
What Your Platform Includes
Your Intel®Carrier Grade Server TIGI2U includes the following components:
One Intel®Server Board SE7502JR2
One 2U rack-mount chassis
Two hard disk drive carriers
One bracket for installing a CD ROM or DVD-ROM drive
One 600 W SSI (Server System Infrastructure) PFC (Power Factor Correction)
Four-fan assembly for cooling the processor, DIMMs (Dual Inline Memory Modules),
PCI slot and other internal components
One processor air duct
Front panel I/O board
Cables and connectors
CD-ROM drive
One IMM Advanced Module
See the Intel®Carrier Grade Server TIGI2U Hardware Reference Guide for initial
installation instructions.
Product Accessories
You may need or want to purchase one or more of the following accessory items for your
server:
One Intel®Xeon™ Processor: 3.2 GHz with an 800 MHz system bus
One processor heat sink
DDR2-400 memory DIMMs
Hard disk drives (HDDs)
PCI (Peripheral Component Interconnect) add-in card
Rack mount kit
Power cord (If not included with the platform. This product ships with a power cord in
North America only.)
For information about the accessories, memory, processors, and third-party hardware that
has been tested and can be used with your board, and for ordering information for Intel
products, see http://support.intel.com/support/motherboards/server/TIGI2U/compat.htm.

Preface
Intel®Carrier Grade Server TIGI2U User Guide v
Additional Information and Software
If you need more information about this product or information about the accessories that
can be used with this Carrier Grade Server, go to
In-depth technical information about the server board included with this Carrier
Grade Server, including BIOS settings and chipset information
http://support.intel.com/support/motherboards/server/TIGI2U/index.htm
The latest product information
Accessories or other Intel server products
Hardware (peripheral boards, adapter cards) and operating systems that have been
tested with this product
DIMMs that have been tested with this product
The power budget for this product
Software to manage your Carrier Grade Server
Diagnostics testing software
Firmware and BIOS updates
System drivers
Safety Information
WARNING
Although you may be using this guide or another resource as a
reference, before working with your server product pay close attention
to the safety instructions. You must adhere to the assembly
instructions in this guide to ensure and maintain compliance with
existing product certifications and approvals. Use only the described,
regulated components specified in this guide. Use of other products /
components will void the UL listing and other regulatory approvals of
the product and will most likely result in noncompliance with product
regulations in the region(s) in which the product is sold.
WARNING
All LAN ports of the equipment are considered Type 2 or Type 4 intra-
building ports as described in NEBS GR-1089-CORE, Issue 4. The
LAN ports are suitable for connection to intra-building or unexposed
wiring or cabling only. The LAN ports of the equipment MUST NOT
be metalically connected to interfaces that connect to the OSP or its
wiring. The addition of primary protectors is not sufficient protection in
order to connect these interfaces metalically to OSP wiring. All LAN
ports must be installed with shielded cabling which must be grounded
at both ends.

Preface
Intel®Carrier Grade Server TIGI2U User Guide
vi
Emissions Disclaimer
To ensure EMC (Electromagnetic Compatibility) compliance with your local regional rules
and regulations, the final configuration of your end system product may require additional
EMC compliance testing. For more information, please contact your local Intel
Representative.
See “Regulatory and Integration Information” for product Safety and EMC regulatory
compliance information. This is an FCC (Federal Communications Commission) Class A
device.
Intended Uses
This product was evaluated as Information Technology Equipment (ITE), which may be
installed in Central Offices, Telecommunication Centers, offices, schools, computer
rooms, and similar commercial type locations where the National Electrical Code (NEC)
applies. The suitability of this product for other product categories and environments
(medical, industrial, OSP telecommunications, residential, alarm systems, test equipment,
etc.), other than an ITE application, may require further evaluation.
WARNING
Anchor the equipment rack: The equipment rack must be anchored to
an unmovable support to prevent it from falling over when one or
more servers are extended in front of the rack on slides. You must
also consider the weight of any other device installed in the rack. A
crush hazard exists should the rack tilt forward which could cause
serious injury.
If AC power supplies are installed:
Mains AC power disconnect: The AC power cord(s) is considered the
mains disconnect for the server and must be readily accessible when
installed. If the individual server power cord(s) will not be readily
accessible for disconnection then you are responsible for installing an
AC power disconnect for the entire rack unit. This main disconnect
must be readily accessible, and it must be labeled as controlling
power to the entire rack, not just to the server(s).
Grounding the rack installation: To avoid the potential for an electrical
shock hazard, you must include a third wire safety ground conductor
with the rack installation. If the server power cord is plugged into an
AC outlet that is part of the rack, then you must provide proper
grounding for the rack itself. If the server power cord is plugged into a
wall AC outlet, the safety ground conductor in the power cord provides
proper grounding only for the server. You must provide additional,
proper grounding for the rack and other devices installed in it.

Preface
Intel®Carrier Grade Server TIGI2U User Guide vii
Overcurrent protection: The server is designed for an AC line voltage
source with up to 20 amperes of overcurrent protection per cord feed.
If the power system for the equipment rack is installed on a branch
circuit with more than 20 amperes of protection, you must provide
supplemental protection for the server. The overall current rating of a
configured server is less than 6 amperes. It is intended that an
external Surge Protective Device (SPD) will be utilized at the AC
power service for the equipment.
If DC power supplies are installed:
Connection with a DC (Direct Current) source should only be
performed by trained service personnel. The server with DC input is to
be installed in a Restricted Access Location in accordance with
articles 110-16, 110-17, and 110-18 of the National Electric Code,
ANSI/NFPA 70. The DC source must be electrically isolated by double
or reinforced insulation from any hazardous AC source. The DC
source must be capable of providing up to 600 Watts of continuous
power per feed pair.
Main DC power disconnect: You are responsible for installing a
properly rated DC power disconnect for the server system. This mains
disconnect must be readily accessible, and it must be labeled as
controlling power to the server. The circuit breaker of a centralized DC
power system may be used as a disconnect device when easily
accessible and should be rated no more than 10 amps.
Grounding the server: To avoid the potential for an electrical shock
hazard, you must reliably connect an earth grounding conductor to the
server. The earth grounding conductor must be a minimum 14AWG
connected to the earth ground stud(s) on the rear of the server. The
safety ground conductor should be connected to the chassis stud with
a Listed closed two-hole crimp terminal having 5/8 inch pitch. The
nuts on the chassis earth ground studs should be installed with a
10 in/lbs torque. The safety ground conductor provides proper
grounding only for the server. You must provide additional, proper
grounding for the rack and other devices installed in it. The battery
return input terminal is designed as an isolated DC return (DC-I) from
the frame earth ground per NEBS GR-1089-CORE.
Overcurrent protection: Overcurrent protection circuit breakers must
be provided as part of each host equipment rack and must be
incorporated in the field wiring between the DC source and the server.
The branch circuit protection shall be rated minimum 75Vdc, 10 A
maximum per feed pair. If the DC power system for the equipment
rack is installed with more than 10 amperes of protection, you must
provide supplemental protection for the server. The overall current
rating of a server configured is 10 amperes.

Preface
Intel®Carrier Grade Server TIGI2U User Guide
viii
WARNING
Do not attempt to modify or use an AC power cordset that is not the
exact type required. You must use a power cordset that meets the
following criteria:
•Rating: In the U.S. and Canada, cords must be UL (Underwriters
Laboratories, Inc.) Listed/CSA (Canadian Standards
Organization) Certified type SJT, 18-3 AWG (American Wire
Gauge). Outside of the U.S. and Canada, cords must be flexible
harmonized (<HAR>) or VDE (Verband Deutscher
Electrotechniker, German Institute of Electrical Engineers)
certified cord with 3 x 0.75 mm conductors rated 250 VAC (Volts
Alternating Current).
•Connector, wall outlet end: Cords must be terminated in
grounding-type male plug designed for use in your region. The
connector must have certification marks showing certification by
an agency acceptable in your region and for U.S. must be Listed
and rated 125% of overall current rating of the server.
•Connector, server end: The connectors that plug into the
AC receptacle on the server must be an approved IEC
(International Electrotechnical Commission) 320, sheet C13, type
female connector.
•Cord length and flexibility: Cords must be less than 4.5 meters
(14.76 feet) long.
CAUTION
Temperature: The temperature, in which the server operates when
installed in an equipment rack, must not go below 5 °C (41 °F) or rise
above 40 °C (104 °F). Extreme fluctuations in temperature can cause
a variety of problems in your server.
Ventilation: The equipment rack must provide sufficient airflow to the
front of the server to maintain proper cooling. The rack must also
include ventilation sufficient to exhaust a maximum of 1023 BTU's
(British Thermal Units) per hour for the server. The rack selected and
the ventilation provided must be suitable to the environment in which
the server will be used.

Preface
Intel®Carrier Grade Server TIGI2U User Guide
ix
Safety Cautions
Read all caution and safety statements in this document before performing any of the
instructions. See also Intel Server Boards and Server Chassis Safety Information on the
Resource CD and/or at
http://support.intel.com/support/motherboards/server/sb/CS-010770.htm.
Wichtige Sicherheitshinweise
Lesen Sie zunächst sämtliche Warn- und Sicherheitshinweise in diesem Dokument, bevor
Sie eine der Anweisungen ausführen. Beachten Sie hierzu auch die Sicherheitshinweise
zu Intel-Serverplatinen und -Servergehäusen auf der Ressourcen-CD oder unter
http://support.intel.com/support/motherboards/server/sb/CS-010770.htm.
重要安全指导
在执行任何指令之前，请阅读本文档中的所有注意事项及安全声明。参见 Resource
CD（资源光盘） 和/或
http://support.intel.com/support/motherboards/server/sb/CS-010770.htm
上的
Intel Server
Boards and Server Chassis Safety Information
（《Intel
服务器主板与服务器机箱安全信息》）。
Consignes de sécurité
Lisez attention toutes les consignes de sécurité et les mises en garde indiquées dans ce
document avant de suivre toute instruction. Consultez Intel Server Boards and Server
Chassis Safety Information sur le CD Resource CD ou bien rendez-vous sur le site
http://support.intel.com/support/motherboards/server/sb/CS-010770.htm.
Instrucciones de seguridad importantes
Lea todas las declaraciones de seguridad y precaución de este documento antes de
realizar cualquiera de las instrucciones. Vea Intel Server Boards and Server Chassis
Safety Information en el CD Resource y/o en
http://support.intel.com/support/motherboards/server/sb/CS-010770.htm.

Contents
Intel®Carrier Grade Server TIGI2U User Guide
10
Contents
Preface .................................................................................................................iii
Intel® Carrier Grade Server TIGI2U Features .................................................. 16
Server Platform Components ..............................................................................................19
Server Platform Back Panel ................................................................................................20
Server Platform Front Panel ................................................................................................21
Server Platform Peripherals ................................................................................................22
Server Board Connector and Component Locations............................................................23
Configuration Jumpers ........................................................................................................24
Front Panel IO (FPIO) System Board ..................................................................................25
Features .....................................................................................................................25
FPIO SCSI Subsystem Status LEDs...........................................................................25
Peripheral Bay.....................................................................................................................26
Hard Disk Drives .................................................................................................................26
Interconnect System (SysCon) Board .................................................................................26
Power Supply......................................................................................................................27
System Cooling ...................................................................................................................28
Hardware Requirements .....................................................................................................28
Processor ...................................................................................................................28
Memory ......................................................................................................................29
Platform Installations and Upgrades............................................................... 33
Before You Begin ................................................................................................................33
Tools and Supplies Needed........................................................................................33
System References ....................................................................................................33
Cable Routing Reference ...........................................................................................33
Removing and Installing the Chassis Cover ........................................................................35
Removing the Chassis Cover .....................................................................................35
Installing the Chassis Cover .......................................................................................36
Removing and Installing the Front Bezel .............................................................................37
Removing the Front Bezel ..........................................................................................37
Installing the Front Bezel ............................................................................................38
Removing and Installing the Processor Air Duct..................................................................39
Removing the Processor Air Duct...............................................................................39
Installing the Processor Air Duct.................................................................................40
Installing and Removing Memory DIMMs ............................................................................41
Installing DIMMs .........................................................................................................41
Removing DIMMs .......................................................................................................42
Replacing the Processor .....................................................................................................42
Removing the Processor ............................................................................................43
Installing the Processor ..............................................................................................44
Installing or Removing a Hard Drive ....................................................................................46
Installing a Hard Drive ................................................................................................46
Removing a Hard Drive ..............................................................................................48
Replacing the CD-ROM Drive .............................................................................................48
Removing the CD-ROM / DVD-ROM Drive.................................................................49
Installing the CD-ROM / DVD-ROM Drive...................................................................50

Contents
Intel®Carrier Grade Server TIGI2U User Guide 11
Installing or Removing a PCI Add-in Card ...........................................................................51
Installing a PCI Add-in Card........................................................................................51
Removing a PCI Add-in Card......................................................................................53
Replacing the Power Supply ...............................................................................................55
Removing the Power Supply.......................................................................................55
Installing the Power Supply ........................................................................................56
DC Power In Male Connector Configuration ...............................................................56
Grounding a DC Powered System ..............................................................................57
Replacing the Four-Fan Assembly ......................................................................................57
Removing the Four-Fan Assembly..............................................................................58
Installing the Four-Fan Assembly ...............................................................................59
Replacing the Mini-Bezel.....................................................................................................60
Replacing the Front Panel I/O Board...................................................................................61
Removing the Front Panel I/O Board ..........................................................................61
Replacing the Light Pipe.............................................................................................63
Installing the Front Panel I/O Board ............................................................................64
Replacing the PCI Riser Board............................................................................................66
Replacing the Power Interface Board ..................................................................................68
Removing the Power Interface Board .........................................................................69
Installing the Power Interface Board ...........................................................................70
Replacing the Serial/Alarms Cable ......................................................................................70
Removing the Serial/Alarms Cable .............................................................................71
Installing the Serial/Alarms Cable ...............................................................................72
Replacing the Server Board ................................................................................................73
Removing the Server Board........................................................................................73
Installing the Server Board .........................................................................................75
Replacing the Backup Battery .............................................................................................77
Installing or Replacing the Power Cord.......................................................................79
Installing the Platform into a Rack .......................................................................................79
Equipment Rack Precautions ..............................................................................................79
Server Utilities ................................................................................................... 82
Using the BIOS Setup Utility................................................................................................82
Starting Setup.............................................................................................................82
If You Cannot Access Setup.......................................................................................82
Setup Menus ..............................................................................................................82
Upgrading the BIOS ............................................................................................................84
Preparing for the Upgrade ..........................................................................................84
Upgrading the BIOS ...................................................................................................85
Clearing the Password ........................................................................................................85
Clearing the CMOS .............................................................................................................86
Troubleshooting ................................................................................................ 87
Resetting the System ..........................................................................................................87
Problems following Initial System Installation ......................................................................88
First Steps Checklist...................................................................................................88
Hardware Diagnostic Testing ..............................................................................................89
Verifying Proper Operation of Key System Lights .......................................................89
Confirming Loading of the Operating System .............................................................90
Specific Problems and Corrective Actions ...........................................................................90
Power Light Does Not Light ........................................................................................90

Contents
Intel®Carrier Grade Server TIGI2U User Guide
12
No Characters Appear on Screen...............................................................................91
Characters Are Distorted or Incorrect .........................................................................91
System Cooling Fans Do Not Rotate Properly ............................................................92
CD-ROM Drive or DVD-ROM Drive Activity Light Does Not Light ...............................92
Cannot Connect to a Server .......................................................................................92
Problems with Network ...............................................................................................93
System Boots when Installing PCI Card .....................................................................93
Problems with Newly Installed Application Software ...................................................94
Problems with Application Software that Ran Correctly Earlier ...................................94
Devices are not Recognized under Device Manager (Windows* Operating System) ..95
Hard Drive(s) are not Recognized ..............................................................................95
Bootable CD-ROM Is Not Detected ............................................................................95
LED Information..........................................................................................................96
BIOS Error Messages .........................................................................................................97
BIOS POST Beep Codes............................................................................................98
Regulatory and Certification Information ..................................................... 100
Product Regulatory Compliance........................................................................................100
Product Safety Compliance ......................................................................................100
Product EMC Compliance – Class A Compliance.....................................................100
Certifications / Registrations / Declarations...............................................................101
Product Regulatory Compliance Markings................................................................101
Electromagnetic Compatibility Notices ..............................................................................102
FCC (USA) ...............................................................................................................102
Industry Canada (ICES-003).....................................................................................103
Europe (CE Declaration of Conformity).....................................................................103
VCCI (Japan)............................................................................................................104
BSMI (Taiwan)..........................................................................................................104
Korean RRL Compliance ..........................................................................................104
Regulated Specified Components ............................................................................105
Getting Help ..................................................................................................... 106
Intel®Server Issue Report Form .................................................................... 107
Warranty........................................................................................................... 111
Limited Warranty for Intel®Chassis Subassembly Products ..............................................111
Extent of Limited Warranty ................................................................................................111
Warranty Limitations and Exclusions.................................................................................112
Limitations of Liability................................................................................................112
How to Obtain Warranty Service .......................................................................................113
Telephone Support ...................................................................................................113
Returning a Defective Product ..................................................................................114

Contents
Intel®Carrier Grade Server TIGI2U User Guide 13
Figures
Figure 1. Intel®Carrier Grade Server TIGI2U .....................................................................16
Figure 2. System Components ...........................................................................................19
Figure 3. Platform Back......................................................................................................20
Figure 4. Front of Server Platform ......................................................................................22
Figure 5. Optional Peripheral CD-ROM or DVD-ROM Drive ...............................................22
Figure 6. Intel®Server Platform TIGI2U Board Diagram .....................................................23
Figure 7. Configuration Jumper Location............................................................................24
Figure 8. SysCon Board .....................................................................................................26
Figure 9. System Cable Routing.........................................................................................34
Figure 10. Removing the Chassis Cover ............................................................................35
Figure 11. Installing the Chassis Cover ..............................................................................36
Figure 12. Removing the Front Bezel .................................................................................37
Figure 13. Installing the Front Bezel ...................................................................................38
Figure 14. Removing the Processor Air Duct......................................................................39
Figure 15. Installing the Processor Air Duct........................................................................40
Figure 16. Installing Memory DIMMs ..................................................................................41
Figure 17. Removing Heat Sink...........................................................................................43
Figure 18. Open the Processor Socket Lever......................................................................44
Figure 19. Installing the Processor in the Processor Socket ................................................44
Figure 20. Close Processor Socket Lever ...........................................................................45
Figure 21. Installing Heat Sink............................................................................................45
Figure 22. Removing Hard Drive Carrier from Chassis.......................................................46
Figure 23. Attaching a Hard Disk Drive to a Carrier............................................................47
Figure 24. Inserting Hard Disk Drive Assembly into Chassis ..............................................48
Figure 25. Removing CD-ROM / DVD-ROM Drive Assembly from Chassis........................49
Figure 26. Install CD-ROM Drive or DVD-ROM Drive Assembly into Chassis ....................50
Figure 27. Removing Riser Assembly from Chassis ...........................................................51
Figure 28. Installing Low-Profile PCI Card into Riser ..........................................................52
Figure 29. Installing Full Length PCI Card into Riser ..........................................................53
Figure 30. Removing a Low-Profile PCI Card.....................................................................54
Figure 31. Removing a Full Height PCI Card......................................................................54
Figure 32. Removing the Power Supply .............................................................................55
Figure 33. Installing the Power Supply ...............................................................................56
Figure 34. DC Power In Male Connector Configuration ......................................................56
Figure 35. Connecting the Terminal Lug.............................................................................57
Figure 36. Removing the Four-Fan Assembly ....................................................................58
Figure 37. Installing the Four-Fan Assembly ......................................................................59
Figure 38. Removing the Mini Bezel...................................................................................60
Figure 39. Removing the Front Panel Board.......................................................................62
Figure 40. Replacing the Light Pipe....................................................................................63
Figure 41. Inserting the Front Panel Board.........................................................................64
Figure 42. Cabling to Front Panel Board ............................................................................65
Figure 43. Removing the Low-Profile PCI Riser Board .......................................................66
Figure 44. Removing the Full Height PCI Riser Board........................................................67
Figure 45. Installing the Low-Profile PCI Riser Board .........................................................67
Figure 46. Installing the Full Height PCI Riser Board..........................................................68
Figure 47. Removing the Power Interface Board ................................................................69
Figure 48. Installing the Power Interface Board ..................................................................70
Figure 49. Removing the Serial/Alarms Cable Threaded Standoffs ....................................71

Contents
Intel®Carrier Grade Server TIGI2U User Guide
14
Figure 50. Removing the Serial/Alarms Connector from the Chassis .................................71
Figure 51. Installing the Serial/Alarms Connector into Chassis...........................................72
Figure 52. Installing the Serial/Alarms Cable Threaded Standoffs ......................................72
Figure 53. Removing the Server Board ..............................................................................74
Figure 54. Installing the Server Board ................................................................................75
Figure 55. Securing SCSI Cable to Server Board Connector..............................................76
Figure 56. Replacing the Battery ........................................................................................78
Figure 57. Password Recovery Jumper..............................................................................85
Figure 58. CMOS Recovery Jumper...................................................................................86

Contents
Intel®Carrier Grade Server TIGI2U User Guide 15
Tables
Table 1. Server Platform Features ................................................................................17
Table 2. NIC LEDs........................................................................................................20
Table 3. Configuration Jumper [J1H2]...........................................................................24
Table 4. LED Activity Definitions ...................................................................................25
Table 5. Keyboard Commands .....................................................................................83
Table 6. BIOS Error Messages .....................................................................................97
Table 7. POST Error Beep Codes.................................................................................98
Table 8. Error Beep Codes Provided by Intel® Management Modules..........................98
Table 9. Product Certification Markings ......................................................................101

Server Platform Features
Intel®Carrier Grade Server TIGI2U User Guide
16
Intel®Carrier Grade Server TIGI2U Features
This chapter briefly describes the main features of the Intel®Carrier Grade Server TIGI2U.
This chapter provides a diagram of the product, a list of the server features, and diagrams
showing the location of important components and connections on the server platform.
The Intel®Carrier Grade Server TIGI2U is shown in the following diagram.
Figure 1. Intel®Carrier Grade Server TIGI2U

Server Platform Features
Intel®Carrier Grade Server TIGI2U User Guide 17
Table 1 summarizes the major features of the server platform.
Table 1. Server Platform Features
Feature Description
Processors
Support for up to two Intel® Xeon™ processors with an 800 MT/s MHz front side
bus at frequency 3.2 GHz with 2MB cache.
Memory Memory mirroring and memory sparing options
Six DIMM slots supporting DDR-2 400MHz memory
Chipset Intel® E7520 chipset, including:
E7520 MCH
PXH
Intel® 82801ER I/O Controller Hub 5-R (ICH-5R)
I/O Control External connections:
Stacked PS/2 ports for keyboard and mouse
RJ45 Serial B port
Two RJ45 NIC connectors for 10/100/1000 Mb connections
Two rear USB 2.0 ports
One front USB port - USB 2.0 compliant with less than ten feet of
external cable
U320 high-density 80-pin SCSI connector (channel B)
Internal connections:
Two USB port headers, each of which supports two USB 2.0 ports
One DH10 Serial A header
One Ultra320 80-pin SCSI connector (Channel A)
One ATA-100 connector
SSI-compliant 34-pin, high-density 100-pin, and alternate 50-pin control
panel headers
Intel® Management Module 120-pin connector, supporting the
Professional and Advanced server management modules
Add-in Card One low-profile riser slot that supports a riser card capable of supporting
upto three low-profile PCI-X 64/100MHz add-in cards.
One full-height riser slot, utilizing Intel® Adaptive Slot technology. Capable
of supporting riser cards that follows PCI-X specifications. The riser card
can support up to three full-height, full-length PCI-X 64/100 MHz add-in
cards.
Video On-board ATI* RAGE XL video controller with 8MB SDRAM
Continued

Server Platform Features
Intel®Carrier Grade Server TIGI2U User Guide
18
Feature Description
Hard Drive SCSI support:
Dual-channel LSI Logic* 53C1030 Ultra320 SCSI controller
Implements LSI Logic* Fusion-MPT architecture
Supports LSI Logic* Integrated Mirroring and Striping technology
Zero-channel RAID supporting the RUBI-2 specification
LAN Dual Intel® 82546GB 10/100/1000 NICs
Fans 
Two 80mm x 38mm fans
Two 40mm x 28mm fans
Server Management /
Diagnostics
On-board Platform Instrumentation using the National Semiconductor*
PC87431M mini-Baseboard Management Controller (mBMC) (Default).
Support for optional Intel® Management Module - Advanced Edition or
Professional Edition
Support for Intel® Server Management 8.x
 Intel® Light-Guided Diagnostics on all field replaceable units (FRUs)
Server Management
Intel®Server Management 5.8 support
Telco Alarm Manager (TAM)

Server Platform Features
Intel®Carrier Grade Server TIGI2U User Guide 19
Server Platform Components
A. Power Distribution Board
F. System Fans
B. Processor Air Duct
G. Front Panel I/O Board
C. Power Supplies
H. SCSI Hard Disk Drive Carriers
D. PCI Riser Card Assembly
I. Peripheral Bay (CD-ROM or DVD-ROM drive)
E. Intel
®
Server Board SE7520JR2
Figure 2. System Components

Server Platform Features
Intel®Carrier Grade Server TIGI2U User Guide
20
Server Platform Back Panel
A DB15 Alarms Connector H RJ45 NIC 1 Connector
B PCI Card Bracket (low-profile) I RJ45 NIC 2 Connector
C PCI Card Bracket (full-height) J Video Connector
D Optional second power supply or filler
panel (filler panel shown)
K USB 1
E Power Supply L USB 0
F PS/2 Mouse and Keyboard Connectors M Server Management Port
G Rear Serial Port N SCSI Channel B
Figure 3. Platform Back
The NIC LEDs at the right and left of each NIC provide the following information.
Table 2. NIC LEDs
NIC LED Color LED State Description
NIC1 / NIC2
(Gigabit) Left LED
Off No network connection
Solid Amber Network connection in place
Blinking Amber Transmit/receive activity
Right LED
Off 10 Mbps connection (if left LED is on or
blinking)
Solid Amber 100 Mbps connection
Solid Green 1000 Mbps connection