iRest A100-9 User manual

SAVE THESE INSTRUCTIONS
OPERATION INSTRUCTIONS
SPACE INTELLIGENT CHAIR
Break through the space imagination and make it wonderful
A100-9

01
Thanks for purchasing this product. Please read this manual instruction carefully in
order to know how to use this product correctly before operation. Please pay more
attention to some important safety warning and keep this manual book properly for
future use.
Note: Our Company reserves the right to revise the design and description of this
product without any further notice. Please refer to the actual color of this product.
CONTENTS
Safety and maintenance matters
Use safety warning
Part Name
Function
Touch screen manual controller interface introduction
Method of usage
1.Switch power supply on
2.Massage function control operation
3.Turn off power, stop massage
4.Installing the Arm Rests
5.Calf installation
6.Touch screen hand controller bracket installation instructions
7.Pillow Pad and backrest pad's dismounting and use manual
8.Floor Protection
9.replace the chair
Product specifications
02-03
04-05
06
07
08
09
09
09-23
24
24-26
26-27
28
29
29
30
30

0302
Safety and maintenance matters Safety and maintenance matters
1.Important Safety Warning.
·Don’t allow children to touch moveable part of this product.
·Please use well-grounding power supply suited to this product.
·Please pull out the plug after use or before cleaning to avoid injury or
Damage to the product.
·Please operate this product according to this manual instruction.
·Don’t use accessories which are not recommended.
·Don’t use this product outdoors.
·Please read this manual instruction carefully before operation.
·Any other usage that is not listed in this manual instruction is forbidden.
·20 minutes of usage each time is recommended.
·Please don’t use it if the leather is broken or damaged.
·Please don’t use it if the cover or leather is damaged.
·Please don’t use it if the radiator hole is covered or blocked.
·Please don’t drop anything into this product.
·Please don’t fall asleep while using this product.
·Please don’t use it if drunk or feel unwell.
·Please don’t use it within one hour after having meal.
·Please don’t make the massage function too strong for avoiding Injury.
2. Environment for usage.
·Please don’t use it under high temperature and moist environment such as
bathroom.
·Please don’t use it immediately while the environmental temperature
changes sharply.
·Please don’t use it under heavy-dusty or caustic environment.
·Please don’t use it where there is not enough space or not good ventilation.
3. People who are not suitable to use this product.
·People who are suffering from osteoporosis are not suitable to use this product.
·People who are suffering from heart disease or carrying electronic medical
equipment such as heart pacemaker are not suitable to use this product.
·People who are suffering from fever are not suitable to use this product.
·Pregnant women or women that are in menses period are not suitable to use this
product.
·People who got injured or skin disease are not suitable to use this product.
·Children under 14-year old or people mentally unbalanced without being
Supervised are not allowed to use this machine.
·People who are told by doctor to have rest or people who feel unwell are not
suitable to use this product.
·People whose bodies are wet are forbidden to use this product.
·The appliance has a heated surface.persons insensitive to Heat must be careful
when using the appliance.
4. Safety.
·Check the voltage if it is suitable to the specification of this product.
·Don’t use wet hand to pull the plug.
·Don’t make water go inside this product to avoid electric shock or cause damage
to this product.
·Don’t damage the wires or change the circuit of this product.
·Don’t use wet cloth to clean the electric parts such as switch and plug.
·Be away from this product under power cut state to avoid injury if the power
comeback suddenly.
·Stop using this product while it works abnormal, and please consult local agent
immediately.
·Stop using this product if you feel unwell, and please consult health care doctor.
·This appliance is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge,
unless they have been given supervision or instruction concerning use of the
appliance by a person responsible for their safety.
·Children should be supervised to ensure that they do not play with the appliance.
·If the supply cord is damaged, it must be replaced by the manufacturer, its Service
agent or similarly qualified persons in order to avoid a hazard.
5. Maintenance.
·This product should be maintained by certain appointed agents, users are
prohibited to disassemble or maintain by themselves.
·Please don’t forget to cut the power after usage.
·Don’t use this product if the socket looses.
·If this product will be left unused for long, please curl up the wires and reserve this
product in dry and dustless environment.
·Don’t reserve this product under high temperature or near fire and avoid longtime
direct sunshine.
·If the detachable cord / supply cord is damaged, it must be replaced by the
manufacturer, its service agent or similarly qualified persons in order to avoid a
Hazard.
·Please clean this product by dry cloth. Don’t use thinner, benzene or alcohol.
·The mechanical components of this product are specially designed and made, it is
not necessary to be specially maintained.
·Don’t use edged res to thrust this product.
·Don’t roll or pull this product above uneven ground, it should be lifted before
moving.
·Please use it intermittently; don’t make this product work continuously for long.
6. Solution of ordinary malfunctions.
·It is nature movement voice if the motor sounds while in usage.
·If the controller can’t work normally, please check the plug and socket if they are
connected strongly and make sure the switch is turned on.
·If the rated working time is over, the product will automatically activate the power-
off button; If this product works continuously for long, the temperature protector will
make the product automatically power-off, it should be used again after half an
hour's rest.

0504
Use safety warning Use safety warning
Warning Warning
Warning
Warning
·When the footrest lifting, people should not apply pressure on the footrest to avoid
the massage chair falling forward to damage the product or cause personal
injuries
Prohibit pressing
·Before sitting on the massage chair, Please make sure the massage hand cannot
place in the seat position, so as avoiding the massage hand to damage the
product or cause personal buttocks injuries.
·Do not strive to pull out the touch screen control cable or power cord during
standby or power-on state to avoid product damaged or electrocution accidents.
Advise you unplug the controller cable and power cord and store properly if you
do not use the chair.
·The touch screen controller holder is fixed. During the use or movement of the
massage chair, do not pull the holder hard to avoid damage the chair.
·When turning on the zero-gravity lying function, be sure to notice whether there
are children or pets under the massage table under the bottom of the calf and the
backrest to stay or play to avoid product damage and personal injury.

06 07
20
19
24 25
22
23
21
POWER INPUT
Part Name Function
1.Pillow Pad
2.3D digital Speakers
3.Upper Arm Air Bag
Assembly
4.O2 Ionizer
5. Shortcut Button
6. USB Charging Port
7. Arm Air Bag Assembly
8. Phone pocket
9. Seat Cushion
10. Touch screen
controller stand
11. Calf Massage Assembly
12. Foot Massage Assembly
13. End Sealing Plate
14. Back Cushion
15. Back air massage
16. Armrest
17. LED Lights
18. Side panel
19.Back Cover
20.Armrest Decoration
21. Touch screen remote
controller
22. PCB Box Cover
23. Power Cord and plug
24. Power Cord Socket
25. Power Switch
·This product is designed with a set of intelligent 3D massage head that can walk up and
down, front and rear telescopic, and silent design.
·It can automatically detect the position of the shoulder and can be fine-tuned; detect the
human body curve and the position of the massage finger pressure point, and
automatically adjust the front and rear telescopic length of the massage head according to
the detected human body curve and the massage finger pressure point.
· :With four different automatic massage scenes VIP, Healthcare, Special, Relaxation. A total
of 23 automatic massage program.
·Three memory functions: program memory Ⅰ, program memory Ⅱ, program memory Ⅲ.
·The upper half manually selects the massage function; there are five kinds of massage
position selections such as full, partial, fixed point, upper back and lower back; shoulder
lifting, kneading, tapping, shiatsu, kneading and tapping and 3D six massage techniques;
The massage technique has five speeds that can be adjusted; when massaged in tapping
and shiatsu, the robot massage ball has five widths to adjust.
·Air massage function: Arm pressure massage function (built-in 8 airbags), upper arm air
pressure massage function (built-in 4 airbags), and three levels air pressure intensity
adjustment.
·Lower half air massage function: Waist pressure massage function (built-in 4 airbags), leg
air pressure massage function (built-in 4 airbags), foot air pressure massage function
(built-in 16 airbags), and three levels air pressure intensity adjustment.
·The back heating function uses carbon fiber as an infrared heating source
·As the back rest reclines down, this product is built to save wall space by making the chair
slide forward.
·Music playback system: built-in 3D digital speaker on the left and right arms. The
Bluetooth function of the smart device can be used to play music on a wireless
connection.
·Twisting massage function: it uses the waist airbag pressure to swing around to form a
twisting massage function, which relieves sedentary and causes tension in the waist
muscles.
·The right armrest is provided with a negative oxygen ion button, raise button, recline
button, zero gravity button, pause button, automatic mode button, foot adjustment button,
and calf adjustment button.
·Leg lifting or recline adjustment, lifting or recline adjustment of leg and back, zero gravity I
or zero gravity II.
·Calf squeeze function: it has a positive and negative squat and an airbag squeeze
massage function on the lower leg, which can alleviate the stiffness or tension of the calf
muscle caused by long standing; there are three different sputum modes.
·Roller massage function: At the bottom of foot, two pairs of mastoid rotating massage on
toe root; scraping massage on the arch and heel.
·The footrest is equipped with an automatic sensor detection of the leg length function.
When the calf is raised or lowered to a suitable angle, the footrest will automatically detect
the length of the leg and detect the most comfortable massage area.
·As the back rest reclines down, this product is built to save wall space by making the chair
slide forward. Combined with human back curve technology, makes you enjoy personal
massage from the head to the leg.
·Configure 7-inch touch screen remote controller.
·Armrest LED light decoration.
·Configuring a O2 Ionizer at both side of upper armrest.
·USB charging function on the right armrest.
·The upper arm is provided with a width adjustment function, which is adjusted in two steps
(when it reaches the innermost position, the arm is pushed in about one gear to release
the hand, the arm is automatically reset, and so on), adapting to different shoulder widths.
·Shutdown automatic reset function, massage head automatic reset function.
1
2
3
4
5
12
14
9
15
11
13
17
18
6
16
7
8
10

16min
Waist Care
2
06
Upper Air Lower Air
Manual Customise
Angle Setting
Stress Relieving
Energy
Good-night Sleep
Joint Care
Frozen Shoulder
Spine Massage
Thai Massage
More
0908
12
1
6
7
8
9
10
11
5
1)、Start to massage
3
2
4
Touch screen manual controller interface introduction Method of usage
1、Switch power supply on
2Massage function control operation、
Touch screen remote controller introduction
Note: The touch screen remote controller displays the color, massage function
and massage function icon layout order, please refer to the physical display!
1.Bluetooth switch and display
2.Time adjustment button and display
3.The status bar
4.The shoulder position can be adjusted up and down
5.Massage status information display
6.Air pressure intensity display
7.Manual, intelligent storage, angle adjustment, settings and other massage function keys
8.The power switch
9.Automatic massage function
10.Massage switch
11.3D massage function keys
12.Operation / pause button
POWER INPUT POWER INPUT
Diagram of plug in Diagram of line
Diagram of the switch
position of power supply
·After the massage chair cannot enter any mode operation in standby mode.
·Press “Power” button to start massage, enter the boot screen, backrest maintains
the default position, calf rest raises slightly, choosing certain auto mode to start
massage (Auto mode or memory function can be selected). The massage chair
will shut down automatically if auto mode is not selected within 5 minutes.
·VIP Auto Program: Stress Relieving, Energetic Morning, Good-night Sleep, Joint
Care, Frozen Shoulder, Spine Massage.
·Healthcare Auto Program: Office Regimen, Sport Recovery, Brain Refresh, Spine
Care, Waist Care, Legs Care.
·Special Auto Program: Health Recharge, Meridian Treatment, Keep Fit, Bottom
Toning, Restoration Massage, Tiredness Relief.
·Relaxation Auto Program: Full-body Stretch, Thai Massage, Chinese Massage,
Total Relax, Airbag.
Stress Relieving Energy
Good-night Sleep Joint Care
Frozen Shoulder Spine Massage
VIP
Healthcare
Special
Relaxation
Customise
Select an automatic function to start the massage

Method of usage Method of usage
·When you select any of the automatic modes, the backrest and calf position will
be adjusted to the set angle.
·After adjusting the angle, the massage chair will automatically proceed detection
of your shoulder position and acupressure points (Note: There is only shoulder
position detection when in Frozen Shoulder program, while the others are whole
body detection.). If the scan uncompleted, you press the “ ” button to skip the
detection, automatically operate the default massage mode.
06
·Upon completion of scan, a beeping sound will emitting from the chair for 10
seconds or press the enter button, the massage heads will gently roll on your
shoulders. During this period, if you would like to further adjust the detected
shoulder region, you can do so by depressing the up or down shoulder button.
There are 11 levels adjust position. If fail to detect, automatically operate the
default massage point.
Please adjust the position of the shoulder......
06
ShoulderPositionAdjust
OK
OK
·Position too low
·Proper position
·Position too high
Buttons Description
Press to adjust the massage heads higher.
Press to adjust the massage heads lower.
2)、The pause button
·While the massage function is operate, press the “Pause” button to temporarily stop
all massage functions; Press the “Pause” button again to continue the massage. If
the pause time exceeds 20 minutes, all massage functions are automatically turned
off.
Pause
Massage function pause Massage function operation
Run/pause Button Functional description
Pause
Operation
In the operation state, press this button to pause all current
massage functions.
In the pause state, press this button to continue the massage
function before the pause
·Under the massage information interface, click the “ ” or “ ” button on the
3D icon to adjust the massage intensity of the upper back muscles, Five levels
intensity.
3)、Upper body massage strength (3D key)
Speed
1 level 2 level 3 level 4 level 5 level
Note:
·Massage strength: 3D massage strength, that is, the massage head is extended
forward or the whole is retracted. The strength of the massage is adjusted to the
strength within a certain massage area. Detect acupressure points, the strength of
each massage point can be tested. You can adjust the strength of a certain
massage point with this button in both automatic and manual conditions.
16min
Waist Care
2
06
Upper Air Lower Air
Manual Customise
Angle Setting
Stress Relieving
Energy
Good-night Sleep
Joint Care
Frozen Shoulder
Spine Massage
Thai Massage
More
1110
2
06
Upper Air Lower Air
Manual Customise
Angle Setting
Stress Relieving
Energy
Good-night Sleep
Joint Care
Frozen Shoulder
Spine Massage
Thai Massage
More
16min
Waist Care
Auto lying down
Justamoment......
Body sensing progress

1312
4)、Automatic function
Method of usage Method of usage
·There are four different automatic massage scenes in Auto mode:
·VIP Auto Program: Stress Relieving, Energetic Morning, Good-night Sleep, Joint
Care, Frozen Shoulder, Spine Massage.
·Healthcare Auto Program: Office Regimen, Sport Recovery, Brain Refresh,
Spine Care, Waist Care, Legs Care.
·Special Auto Program: Health Recharge, Meridian Treatment, Keep Fit,
Bottom Toning, Restoration Massage, Tiredness Relief.
·Relaxation Auto Program: Full-body Stretch, Thai Massage, Chinese
Massage, Total Relax, Airbag. There are 23 automatic massage functions
in total. Click the “auto” icon to select the automatic massage, when in
automatic massage, the speed and width can not be adjusted.
·Press “more" icon to select the corresponding automatic massage function.
Function Description
Auto mode
VIP
Special
Relaxation
Relieve fatigue and relax muscle, improve microcircu-
lation of back & limbs and quickly relieve stress.
Stress
Relieving
Energy
Good-night
Sleep
Joint Care
Frozen
Shoulder
Spine
Massage
The body gets rest after one night sleeping. Quickly
wakeup all the body functions by massaging whole
muscle to start a fresh day.
It helps balance your body, quickly improve sleep
quality by massaging the 12 health acupoints.
Care for the health of all joints by pushing, pulling,
stretching and other massage modes
The unique massage mode for neck and shoulder,
relieve neck and shoulder pain and improve blood
supply in the brain.
Massage each spine to protect its health, alleviate
slipped disc.
Legs Care
Healthcare
Office
Regimen
Sport
Recovery
Brain
Refresh
Spine Care
Waist Care
Increase physical exercise by massage, improve the
body functions of Office Sedentary.
Restoring physical fatigue quickly of after-exercise-body.
Relieve neck and shoulder pain, promote blood supply
to the brain by massaging yuzhen and dazhu points.
Care for the health of spine and improve the lack of
exercise.
Focus on improving spine health and relieving stiffness
in the waist muscles.
Quickly relieve the soreness and muscle fatigue in
lower body.
Improve the quality of nap and work efficiency.
Health
Recharge
Meridian
Treatment
Keep Fit
Bottom
Toning
Restoration
Massage
Tiredness
Relief
Dredge the meridians, improve the body's microcirculation
and immunity quickly。
Effectively massage buttocks and legs to shaping the
body, reduce the accumulation of body fat.
Improve overall blood circulation of body to enhance
vitality and immunity.
Wake up all body functions quickly, replenish physical
strength and restore fatigue by massaging the 12
health acupoints.
Relieve fatigue, restore vitality, clean the blood lactic
acid produced after exercise.
Full-body
Stretch
Thai
Massage
Chinese
Massage
Total Relax
Airbag
Stretch the body to increasing its flexibility by Thai
massage.
Comprehensively relieve fatigue and soreness through
a deep massage for whole body.
According to the traditional Chinese medicine theory,
balance the body function to achieve physical fitness
and remove the disease.
Total Relax, soothing massage the whole body by
kneading and tapping to relieve fatigue.
Focusing on body pressure massage, it can fully relax
the body, restore fatigue, and calm the nerves.
206
Upper Air Lower Air
Manual Customise
Angle Setting
Stress Relieving
Energy
Good-night Sleep
Joint Care
Frozen Shoulder
Spine Massage
Thai Massage
More
16min
Waist Care
2
06
Upper Air Lower Air
Stress Relieving
Energy
Good-night Sleep
Joint Care
Frozen Shoulder
Spine Massage
VIP Auto Program
VIP
Healthcare
Special
Relaxation
16min
Waist Care

·Under the manual massage function interface, select the manual massage
technique, back stretch, speed and width adjustment.
·Manual (manipulation): includes six different massage techniques: knead, tap,
knead & tap, shiatsu, 3D, and shoulder. In the state of tap and shiatsu massage,
the width of the massage ball of the robot is adjustable. The massage speed can
be adjusted in other massage techniques except for stopping. You can also close
the manual massage interface by clicking the " " icon.
1514
5)、Manual
01)、Manual - manipulation
02)、Manual - back stretching
Method of usage Method of usage
·Click the “ ” icon to enter the manual massage function selection interface,
including manual, manual strength and width, back stretch, upper airbag massage,
lower air bag massage, calf squeeze, foot rollers, Negative oxygen ions, heat and
other massage functions.
·Click the “ ” icon to close the manual massage interface.
Manual massage function selected interface Manual massage function interface
Speed
Width
Manual massage function - manual interface
Speed- Speed+
Width- Width+
1 level 2 level 3 level 4 level 5 level
1 level 2 level 3 level 4 level 5 level
Manual button Functional description
3D massage
Knead
Knead & tap
Shoulder
Tap
Shiatsu
4 different kinds of 3D modes, speed and strength may also be
adjusted
Speed and strength may also be adjusted
Combination kneading and tapping function. Speed and strength
may also be adjusted
Shoulder grasping function relieve neck and shoulder tension.
Speed and strength may also be adjusted
Two different tapping methods may be accessed by pressing this
button again. Speed, width and strength may also be adjusted
Two different shiatsu methods may be accessed by pressing this
button more than once, speed, width and strength may also be
adjusted with speed, back intensity, and width buttons.
·Manual (massage area): includes massage functions such as fixed, partial, overall,
upper back, and lower back.
·Click on the corresponding stretch mode icon to select the personalized massage
function. You can also close the manual massage interface by clicking the " " icon.
Manual massage function - back stretching interface
Manual
206
Upper Air Lower Air
Manual Customise
Angle Setting
Stress Relieving
Energy
Good-night Sleep
Joint Care
Frozen Shoulder
Spine Massage
Thai Massage
More
16min
Waist Care
06
Upper Air Lower Air
16min
Waist Care
06
Upper Air Lower Air
16min
Waist Care
3D
Ⅳ
Ⅱ Ⅱ
Manual Mode
Knead Shiatsu Grasp
Speed-
Width-
Partial
Lower
Air
Foot
Roller
Spe ed+
Width+
Upper
Air
Full Upper Lower
Calf
Knead
06
Upper Air Lower Air
16min
Waist Care
Tap
Knead&Tap
Spot
开启 OF FON
-Ion Heat
3D
Ⅳ
Ⅱ Ⅱ
Manual Mode
Knead Shiatsu Grasp
Speed-
Width-
Partial
Lower
Air
Foot
Roller
Upper
Air
Full Upper Lower
Calf
Knead
Speed+
Width+
Tap Knead&Tap
Spot
开启 OF FON
-Ion Heat
3D
Ⅳ
Ⅱ Ⅱ
Manual Mode
Knead Shiatsu Grasp
Speed-
Width-
Partial
Lower
Air
Foot
Roller
Spe ed+
Width+
Upper
Air
Full Upper Lower
Calf
Knead
Tap
Knead&Tap
Spot
开启 OF FON
-Ion Heat

·Manual (air pressure): includes upper body airbag pressure and lower body air pressure
massage function. Click the air pressure function icon to turn the air pressure massage
function on or off. Adjust the intensity by clicking the " " or " "button. You can also
close the manual massage interface by clicking the " " icon.
Method of usage Method of usage
Function Description
Point
Local
Upper back
Lower back
overall
Upper adjust
Lower adjust
Press button once, a single dot appears in the display. Massage
apparatus will stay stationary.
Press button again, two arrows appear. Massage apparatus will
move in an approximately 3 inch range.
Round back massage.
Round back massage.
Full back massage.
Press and hold to move the range of the massage area up in the
Fixed or Partial Position.
Press and hold to move the range of the massage area up in the
Fixed or Partial Position.
03)、Manual - air pressure massage
Manual massage function - air pressure
selection interface
In the upper body air pressure or lower body air
pressure open state, you can adjust the air
pressure massage three level strength.
Speed
1level 2level 3level
Function Description
Upper Air
Lower Air
Turn the upper body air pressure massage function on or off.
Turns the lower body air pressure massage function on or off.
04)、 Manual - calf squeeze
ModeⅠModeⅡModeⅢ
Calf squeeze massage mode
Forward Reverse Positive
inversion
After opening calf squeeze massage
function, adjust positive and negative
rotation massage function.
Manual massage function – the calf
squeeze interface
Function Description
Press the switch on or off the calf squeeze massage function.
05)、Manual - foot rollers
Speed
Manual massage function - foot rollers
selection interface
1level 2level 3level
Function Description
Press the switch on or off the foot rollers massage function.
Foot
Roller
· Select to turn the calf massage function on or off by pressing the “ ” button;
There are three different calf massage modes. Adjust the calf massage mode by
clicking the " " or " " button.
·Click the “ ” icon to close the manual massage interface.
Calf
Knead
Calf
Knead
· By Pressing “ ” to select switch on or off the foot rollers massage function. Click
“ ” or “ ” to adjust the speed of the roller. The speed can be adjusted in three
levels. You can also click “ ” icon to close the manual massage interface.
Foot
Roller
1716
06
Upper Air Lower Air
16min
Waist Care
06
Upper Air Lower Air
16min
Waist Care
06
Upper Air Lower Air
16min
Waist Care
3D
Ⅳ
Ⅱ Ⅱ
Manual Mode
Knead Shiatsu Grasp
Speed-
Width-
Partial
Foot
Roller
Spe ed+
Width+
Full Upper Lower
Calf
Knead
Upper
Air
Lower
Air
Tap Knead&Tap
Spot
开启 OF FON
-Ion Heat
3D
Ⅳ
Ⅱ Ⅱ
Manual Mode
Knead Shiatsu Grasp
Speed-
Width-
Partial
Lower
Air
Foot
Roller
Spe ed+
Width+
Upper
Air
Full Upper Lower
Calf
Knead
Tap
Knead&Tap
Spot
开启 OF FON
-Ion Heat
3D
Ⅳ
Ⅱ Ⅱ
Manual Mode
Knead Shiatsu Grasp
Speed-
Width-
Full Back Upper Back Lower Back Partial
Lower
Air
Spe ed+
Width+
Upper
Air
Foot
Roller
Calf
Knead
Tap Knead&Tap
Spot
开启 OF FON
-Ion Heat

·Click the “ ” button icon to enter adjustment interface, including massage
function of linkage sitting, linkage lying, calf rise, leg down, zero gravity, leg
stretch, and foot stretch.
·Click the “ ” icon to close the angle adjustment interface.
· Click the “ ” button icon to enter the program memory massage function
selection interface, including program memory I, program memory II, program
memory III and other storage or recall functions.
·Select to the storage or recall massage function by clicking on it.
·Storage: Store all current massage methods, air pressure, angle, and other
massage functions.
·Call: Call the previously stored technique, air pressure, angle, and other massage
functions.
·Click the “ ” icon to close the program memory massage interface.
06)、Manual-negativeoxygenion
Method of usage Method of usage
·Click the “Negative Ions ” button to select switch on or off the negative
oxygen ion massage function. You can also click the “ ” icon to close the manual
massage interface.
ON
Manual massage function -
Negative Ions selection interface
Function Description
Press this button switch on or off the negative oxygen ion function.
Negative oxygen ion
ON
07)、Manual-backheating
·Click the “heat ” button to select switch on or off the heating massage function.
Heating is far infrared heating function, and it will be warm after 3 minutes.
·Click the “ ” icon to close the manual massage interface.
ON
Manual massage function -
heating selection interface
Function Description
Press this switch on or off the heating function.
ON
6)、Customise
Customise
Program memory selection interface Program memory interface
7)、Angularadjustment
Angle
Angle adjustment selected interface Angle adjustment interface
1918
2
06
Upper Air Lower Air
16min
Waist Care
06
Upper Air Lower Air
16min
Waist Care
206
Customise
Angle Setting
Upper Air Lower Air
Stress Relieving
Energy
Good-night Sleep
Joint Care
Frozen Shoulder
Spine Massage
Thai Massage
More
Manual
16min
Waist Care
2
06
Upper Air Lower Air
Ⅱ
Ⅰ
Ⅲ
Ⅰ
ⅡⅢ
Customise
Save
Use
16min
Waist Care
206
Customise
Angle Setting
Upper Air Lower Air
Stress Relieving
Energy
Good-night Sleep
Joint Care
Frozen Shoulder
Spine Massage
Thai Massage
More
Manual
16min
Waist Care
3D
Ⅳ
Ⅱ Ⅱ
Manual Mode
Knead Shiatsu Grasp
Speed-
Width-
Partial
Lower
Air
Foot
Roller
Spe ed+
Width+
Upper
Air
Full Upper Lower
Calf
Knead
开启 OF FON
-Ion Heat
Tap
Knead&Tap
Spot
3D
Ⅳ
Ⅱ Ⅱ
Manual Mode
Knead Shiatsu Grasp
Speed-
Width-
Partial
Lower
Air
Foot
Roller
Spe ed+
Width+
Upper
Air
Full Upper Lower
Calf
Knead
开启 OF FON
-Ion Heat
Tap
Knead&Tap
Spot
Angle Adjustment
Foot Adjust
Calf Adjust
Seat-Up
Seat-Down
Calf-Up
Calf-Down

01)、Lyingangleadjustment
02)、Zerogravityadjustment
Method of usage Method of usage
Function Description
Calf-Up
Calf-Down
Leg up: Press and hold to raise the calf unit independently of the
backrest, release to stop; After the calf rest up is completed, the calf
frame will automatically detect the length of the foot.
Leg down: Press and hold to lower the calf unit independently of the
backrest, release to stop; After the calf rest down is completed, the calf
frame will automatically detect the length of the foot.
Linkage Rise: Press and hold to raise both the backrest and calf unit
at the same time, release to stop. After the back rest & calf unit linked
up is completed, the calf frame will automatically detect the length of
the foot.
Linkage Fall: Press and hold to lower both the backrest and calf unit at
the same time, release to stop. After the back rest & calf unit linked
down is completed, the calf frame will automatically detect the length of
the foot.
Function Description
Zero gravityⅠ: Automatically adjust the calf and backrest position to
zero gravityⅠposition.
Zero gravityⅡ: Automatically adjust the calf and backrest position to
zero gravityⅡposition.
03)、Legextension
Function Description
Up button: Press and hold to manually raise the calf massage assembly
to the knee position, release to stop.
Lower button: Press and hold to manually lower the calf massage
assembly to the calf position, release to stop.
Up button: Press and hold this button to manually adjust the foot
massage assembly to slowly shorten, release to stop.
Lower button: Press and hold this button to manually adjust the foot
massage assembly to slowly extend, release to stop.
8)、Settings
02)、Auto-Lock
03)、Sound
04)、Language
05)、S/N
· Click the “ ” button icon to enter the setting selection interface, including backlight
brightness adjustment, sleep time adjustment, button volume switch, serial number,
language selection and other settings.
·Click the “ ” icon to close the settings interface.
Setting
Setting interface
·Select brightness slider and slide left and right to adjust the backlight brightness.
·Select lock screen button and make choice with 1 minute, 3 minutes, 10 minutes or
30 minutes.
·Click the “ ” icon to turn off the button volume, and click “ ” to turn on the
button volume.
·Language selection
·Displays information such as current equipment.
2120
01)、Brightness
Setting selection interface
Manual Customise
Ang le Setting
206
Upper Air Lower Air
Stress Relieving
Energy
Good-night Sleep
Joint Care
Frozen Shoulder
Spine Massage
Thai Massage
More
16min
Waist Care
Seat-Up
Seat-Down
201804150001
English
1Min 3Min 10M in 30Mi n
Setting
Brightness
Sound
Language
S/N
Chine se
Auto-Lock

·Click the “ ” icon to adjust the massage time function. Each time you press it,
it will add 5 minutes. It cannot exceed 40 minutes. If it exceeds 40 minutes, it will
return to 5 minutes.
·Click the “ ” icon to switch on or off Blue tooth. “ ” is to switch off the Blue
tooth status, and “ ” is to switch on the Blue tooth status.
·After the Blue tooth-enabled audio source device (such as mobile phone, MID
tablet, etc.) is paired with the massage chair Blue tooth module, the music played
by the audio source device can be wirelessly transmitted to the massage chair
audio system for music playback via Blue tooth.
9)、Bluetooth
10)、Timeadjustment
16 min
Method of usage Method of usage
Blue tooth switch
Blue tooth
off state
Blue tooth
on state
Blue tooth interface not enabled
Attentions: When controlling the Blue tooth switch, you should return to the main
information control interface. If you are in the manual, angle adjustment or custom
storage control interface, Blue tooth can't be controlled.
Time Setting
Time adjustment interface
Attentions: When adjusting the time, you should return to the main information
control interface. If you are in manual, angle adjustment or custom storage control
interface, the time cannot be controlled.
11)、Handrailshortcutbutton
Function Description
Power button: Short press this button to pause the operation, long
press for 3 seconds to open the key. Pause for more than 20 minutes
during the massage will automatically turn off all massage functions.
O2 Ionizer: Press this switch on or off the negative oxygen ions function.
Back rest & calf unit linked up：Press and hold to raise both the
backrest and calf unit at the same time, release to stop. After the back
rest & calf unit linked up is completed, the calf sensor will automatically
detect the length of the foot.
Back rest & calf unit linked down：Press and hold to lower both the
backrest and calf unit at the same time, release to stop. After the back
rest & calf unit linked down is completed, the calf sensor will
automatically detect the length of the foot.
Zero gravity button: Each time the button is pressed, the position of
the calf frame and the back frame is automatically adjusted to the zero
gravity position. There are two zero gravity modes, and the cycle is
switched.
Up button: Press and hold to manually adjust the foot massage
assembly to slowly shorten, release to stop.
Lower button: Press and hold to manually adjust the foot massage
assembly to slowly extend, release to stop.
Up button: Press and hold to manually raise the calf massage
assembly to the knee position, release to stop.
Lower button: Press and hold to manually lower the calf massage
assembly to the calf position, release to stop.
Automatic mode button: each press, automatic massage function
switch.
USB jack: a USB charging port that can charge smart devices (such
as mobile phones).
2322
16min
Ease Ache
16min
Ease Ache
16min
Ease Ache
Manual Customise
Angle Setting
206
Upper Air Lower Air
Stress Relieving
Energy
Good-night Sleep
Joint Care
Frozen Shoulder
Spine Massage
Thai Massage
More
16min
Waist Care
Manual Customise
Angle Setting
206
Upper Air Lower Air
Stress Relieving
Energy
Good-night Sleep
Joint Care
Frozen Shoulder
Spine Massage
Thai Massage
More
16min
Waist Care

POWER INPUT POWER INPUT
3 Turnoffpower,stopmassage、
4Installing the Arm Rests、
Method of usage Method of usage
·In the process of massage, press the power switch key to immediately turn off all
massage functions, the backrest and the calf are reset, the massage time is up,
and all massage functions are immediately turned off, and the backrest and the
calf are not reset.
·Cut off the power supply of the whole machine, the figure (schematic diagram of
the whole machine power cut).
Schematic diagram of the whole machine power turning off.
Schematic diagram of unplugging the whole machine wiring.
Schematic diagram of unplugging the power plug.
·Locate the connector plug corresponding to the armrest from the bottom of the
frame and pass it out from the center of the rear end of the frame (Figure 1).
·After passing the connector plug from the middle of the rear end of the frame,
corresponding to each pair of wiring plugs (docking according to the mark on the
physical pair wiring) (Figure 2).
Figure 1 Figure 2
·The connector from the bottom of the frame is inserted firmly with the armrest
connector, and the air pipe connector is also inserted into the position (Figure 3).
·After connecting with the corresponding connecting wires, gently insert the middle
of the steel pipe behind the frame steel frame into the bottom of the frame by
hand, and take care to avoid the air pipe collapse (Figure 4).
Figure 3 Figure 4
·Hold the front and rear ends of the armrests with both hands, first insert the limit
shaft at the rear end of the armrest into the limit shaft card at the lower end of the
back steel frame, then push the armrest up slightly by hand and check whether
the armrest limit shaft is firmly inserted (Figure 5).
·After inserting the rear end of the armrest, hook the front end of the armrest into
the steel tube of the seat frame and press down on the front end of the armrest;
then gently shake the armrest to check whether the front and rear ends of the
armrest are in place (Figure 6).
Figure 5 Figure 6
Limit block
Limit axis
·Align the mounting holes on the steel frame at the front end of the fixed armrest,
and then tighten armrest and frame steel tube with two M5×14-12.9 screws and a
6×12×1.5 flat pad by supplied 4# hex wrench. (Figure 7).
·fiveTighten the rear end of the armrest and the capsule with M4x10 screws.
Figure 7 Figure 8
2524

5Calf in stall ation、
Method of usage Method of usage
·Insert the hook on the lower part of the shoulder decoration bar into the groove
below the armrest, then fasten the two metal fasteners in the middle to the
armrest (figure 9).
·Tighten the handrail and decorative bar firmly on the inside shoulder of the
handrail with a screw of ST4.2x12, and then gently shake the entire handrail to
check whether the front and rear ends of the handrail are installed in place. After
the armrest is installed, the installation steps of both armrest are the same (figure
10).
Figure 9 Figure 10
·First cut the connecting wire and the air pipe tie fixed on the steel pipe(figure 1).
·Connect the connecting wire and the air pipe leading from the lower end of the
frame to the lower leg joint, and confirm whether the docking is in place, and then
insert the connecting line and air pipe into the bottom of the seat frame from the
lower end hole of the abutment, and pay attention to avoiding the dead air pipe
when filling(figure 2).
Figure 1 Figure 2
·First insert the rotating inner sleeve and the rotating outer sleeve into the left side
of the calf and the right side of the lower leg (note: the large step must face
inward) (figure 3).
·Then open the calf on the left and right mounts of the massage chair to support the
hinge cover(figure 4).
Figure 3 Figure 4
·Then hang the lower leg (left and right shaft) into the frame support hinge plate at
the same time(figure 5).
·Cover rotating shaft cover, press calf rotating cover, and then tighten calf rotating
cover board with two M5×14-12.9 screws and a 6×12×1.5 flat pad by supplied 4#
hex wrench. (Fig. 6)
Figure 5 Figure 6
·After the screw is locked, the groove at the back end of the lower leg cover is
clamped onto the pin axis, and then the front end of the lower leg cover is
pressed down completely parallel to the rotating shaft cover plate, and the convex
point at the side of the lower leg cover is stuck into the hole at the side of the
lower leg hook, and the lower leg is installed(figure 7).
Figure 7
27
26

6.Touch screen hand controller bracket installation instructions 7.Pillow Pad and backrest pad's dismounting and use manual
8.Floor Protection
Method of usage Method of usage
·Take out the touch screen remote controller stand from the accessory bag and put
the mounting flange on the bracket assembly into the mounting seat on the
armrest(figure 1).
·Secure the stand assembly to the armrest with three M4 screws(figure 2).
Figure 1 Figure 2
·Align the two metal cards on the decorative cover with the square bayonet on the
armrest mount, and then press down firmly into the square bayonet to secure
it(figure 3).
·After the entire stand is installed, shake the stand gently to confirm whether it is
installed firmly; Stand installation is completed(figure 4).
·Using head cushions can reduce the kneading massage intensity on neck
andshoulder, according to your needs to decide whether the head cushions
isneeded (recommend head cushions). Backrest cushion and backrest connected
by zipper (1), head cushions and backrest pad connected by thread gluing (2).
Caution: Do not move the chairs with its wheels on wood floor, rough ground or in
a narrow space. Two people are required to lift the chair. During the lifting period,
take the calf rest end sealing plate and backrest cover grooves as the force-bearing
point(Please do not lift armrest directly.)
·Put the heavy massage chairs on the wood floor for a may damage the floor, so
please place a carpet or other object to avoid this damage.
29
28
Figure 3 Figure 4
12
Zipper Thread gluing

Product specifications
Model: A100
Configure: 9
Name: Massage Chair
Rated voltage: 110-120V~ 60Hz
220-240V~ 50Hz/60Hz
Rated power input:220W
Rated time: 20Min
Safety structure: Class I
Material introduction: PVC, PA, steel parts and electric & electron parts
MATERIAL PU LEATHER CLOTH WOOD
30
Method of usage
9.Replace the chair
Note: During movement you must turn off the power first and then unplug the
power cord and the controller cord.
·Ensure all the wires are pulled out of massage chair before moving, and it must
be moved by two people. One person in front of and the other behind, front one
lifts the massage chair up while the behind one presses it down. Massage chair
can be pushed forward when its weight completely falls on the base pulley, then
gently put it back to normal angle after moving to the right position.
lift it up Press It Down