
230 West Coleman Street • Rice Lake, WI 54868 USA
TEL 715-234-9171 • FAX 715-234-6967
WEB SITE: www.rlws.com
© 1999 Rice Lake Weighing Systems
©Specifications subject to change without notice
3/99
P/N 51319
Ishida QBX Series—Calibration
Calibration Procedure
Follow the steps in the table below to calibrate the QBX Series scale.
Notes:
•Press any key to cancel calibration procedures and return to the weigh display.
•If [o-Err] appears on the display, the weight exceeds the scale capacity.
•Standard calibration weight is 1/2capacity. However, when possible, calibrate using a full capacity weight. See the table
below for the unit system capacities.
•If [1-Err] appears on the display, the calibration weight is less than 50% of the standard.
•If [2-Err] appears on the display, an object other than the calibration weight is on the pan, or the display tolerance (1%) is
exceeded.
)kram(.oNtinU E051-BQ E003-BQ E006-BQ E0051-BQ E0003-BQ E0006-BQ EK21-BQ E026-BQ E0026-BQ
1)g(051003006005100030006000210260026
2)gk(51.03.06.05.136 2126.02.6
3)tc(057005100030057000510000300006001300013
4)zo(2.501122500101202412012
5)bl(33.066.03.13.36.631623.131
puteS noitcA
1ehtnwoddloH EDOM .yekehtesaelerneht,ecneuqesniraeppa]LAC[>–]cnuF[litnuyek
2ehtdlohdnasserP Tehtsserp,yek EDOM .emitemasehttasyekhtobesaelerneht,yek
3ehtsserP.sraeppa]tinu[ T:redrosihtnitigidthgirehtfoeulavehtesaercniotyek
]5[....>–]2[>–]1[ .)wolebelbatees(rebmunmetsystinuderisedehttceleS
4ehtsserP EDOM .tnemtsujdaorezsmrofrepyllacitamotuaBQehT.]0no[pullacotyek .)napehtnothgiewynaevaeltonoD(
5detangisedehtecalpyltneG.sraeppayllacitamotua]SFno[,tnemtsujdaorezehtsmrofrepXBQehtretfA .)sthgiewnoitarbilacdetangisedrofwolebelbatees(naphgiewehtforetnecehtnothgiewnoitarbilac
6 .edomgnihgiewehtotsnruteryllacitamotuaelacseht,etelpmocsinoitarbilacnehW