iSMA iSMA-B-MAC36NL User manual

iSMA-B-MAC36NL
User Manual
iSMA-B-LIB-GRAPH
Global Control 5 Sp. z o.o.
Warsaw, Poland
www.gc5.pl

iSMA-B-MAC36NL
Version 1.0 www.gc5.pl Page 2 / 24
Table of contents
1Introduction............................................................................................................................... 4
1.1 History of the revisions ................................................................................................... 4
1.2 iSMA-B-MAC36NL Overview .......................................................................................... 5
1.3 iSMA-B-LIB-GRAPH Overview ........................................................................................ 5
1.4 Key features:...................................................................................................................... 5
1.5 Information about the software license....................................................................... 6
2Description of the pallet ......................................................................................................... 7
2.1 Airflow................................................................................................................................. 7
2.2 Dampers............................................................................................................................. 8
2.2.1 Alarm components ................................................................................................... 8
2.2.2 On/Off components.................................................................................................. 9
2.2.3 0-100% components ................................................................................................ 9
2.3 Cooling..............................................................................................................................10
2.3.1 Alarm components .................................................................................................10
2.3.2 On/Off components................................................................................................10
2.3.3 0-100% components ..............................................................................................11
2.4 Heating .............................................................................................................................11
2.4.1 Alarm components .................................................................................................12
2.4.2 On/Off components................................................................................................12
2.5 Filters ................................................................................................................................12
2.5.1 Normal / alarm components ................................................................................13
2.5.2 Alarm components .................................................................................................13
2.5.3 On/Off components................................................................................................13
2.6 Sensors.............................................................................................................................14
2.6.1 Static components .................................................................................................14
2.6.2 Normal / alarm components ................................................................................14
2.6.3 Alarm components .................................................................................................14
2.7 Humidifier ........................................................................................................................15
2.7.1 Alarm components .................................................................................................15
2.7.2 On/Off components................................................................................................15
2.8 Fans ..................................................................................................................................16
2.8.1 Alarm components .................................................................................................16
2.8.2 On/Off components................................................................................................16
2.9 Heat Exchange................................................................................................................17
2.9.1 Alarm components .................................................................................................18
2.9.2 On/Off components................................................................................................18
2.10 Standalone HVAC ....................................................................................................19
2.10.1 Alarm components .................................................................................................19
2.10.2 On/Off components................................................................................................19
2.10.3 0-100% components ..............................................................................................20
2.11 Grids........................................................................................................................... 21
2.12 Floor plan ..................................................................................................................21

iSMA-B-MAC36NL
Version 1.0 www.gc5.pl Page 3 / 24
2.12.1 Normal / alarm components ................................................................................21
2.12.2 Alarm components .................................................................................................22
2.12.3 On/Off components................................................................................................22
2.13 Piping .........................................................................................................................22
2.13.1 Static components .................................................................................................23
2.13.2 Normal / alarm components ................................................................................23
2.13.3 Alarm components .................................................................................................23
2.13.4 On/Off components................................................................................................23
2.13.5 Multi-condition.........................................................................................................24

iSMA-B-MAC36NL
Version 1.0 www.gc5.pl Page 4 / 24
1Introduction
1.1 History of the revisions
Rev
Date
Description
1.0
28.03.2019
First version
Table 1 - History of the revisions

iSMA-B-MAC36NL
Version 1.0 www.gc5.pl Page 5 / 24
1.2 iSMA-B-MAC36NL Overview
iSMA-B-MAC36NL is a new generation Hybrid IoT Controller equipped with 36I/O and
powered by Niagara 4 framework. It supports many protocols including BACnet IP, BACnet
MS/TP. Modbus TCP, Modbus RTU, LON IP, KNX IP and many more. iSMA-B-MAC36NL
beside great hardware features and outstanding software functionality, offers many
additional packages which builds superb competitive advantage. One of the package is
described below.
1.3 iSMA-B-LIB-GRAPH Overview
iSMA-B-LIB-GRPAH is a library containing a graphical pallet, allowing the integrator to use
ready-made graphic components. The palette contains graphic objects, such as ventilation
ducts, air dampers, coolers, heaters, air filters, sensors, humidifiers, fans, heat exchangers,
free-standing HVAC devices, grids, devices, graphic representations of devices on a floor
plan, hydraulic systems with valves and pumps. The iSMA_Graphics.jar graphics palette is
an ideal addition to the iSMA-B-MAC36NL controller set with HDMI port and iSMA-B-PD-10-
TB touchpad.
1.4 Key features:
•Niagara 4.6 and later
•Prepared Bindings
•Animated components
•Components representing alarm conditions
•Components representing switching on and off states
•Components of 0-100% controlled values
•Multi-state components

iSMA-B-MAC36NL
Version 1.0 www.gc5.pl Page 6 / 24
1.5 Information about the software license
This product is licensed. The iSMA-B-MAC36NL driver is licensed for iSMA-B-LIB-GRAPH as
standard. The license is in the format of an additional GC5.lic file available on the Niagara
Central server. If there is no license, after adding a component to the PX worksheet, the
following watermark will appear on the component only in the web browser. The
components in the Workbench looks as usual.
Figure 1 - watermark

iSMA-B-MAC36NL
Version 1.0 www.gc5.pl Page 7 / 24
2Description of the pallet
Most graphics objects have light shadows, so the palette is dedicated to dark background,
and looks best with black backgrounds. When using iSMA-B-LIB-GRAPH, remember that the
PX file on which graphic components are placed must have the Scale property set to Ratio
Fit for another resolution then default (for full screen mode). For default resolution can be
set as Ratio Fit or None.
The whole pallet is divided into folders structure, which is described according to the
nomenclature and order given in the following subsections.
2.1 Airflow
Figure 2 - sample graphic components from the Airflow folder
The Airflow folder contains static images representing ventilation ducts. Due to the features
described above, graphic components in the folder with prefixes "duct_air", "duct_h" and
"duct_v" must be distributed in the appropriate order in the PX file. Ventilation ducts on the
right-hand side must be positioned higher (in display order - on a higher layer) than the ducts
on the left-hand side.
The picture below shows the effects of incorrect (connection between duct 2 and duct 3)
and correct (connection between duct 3 and duct 1) placement of objects in the PX file,
where component numbers correspond to their order in the "Widget Tree".

iSMA-B-MAC36NL
Version 1.0 www.gc5.pl Page 8 / 24
Figure 3 - Effects of Airflow folder components placement
For ducts "duct_v", at the bottom of the PX file there should be an object that is first in order
in the "Widget Tree".
2.2 Dampers
Figure 4 - sample graphic components from the Dampers folder
The Dampers folder contains dynamic images representing air dampers. Due to the features
described in the section 2, graphic components from the folder with the prefixes
"damper_round" and "damper_square" must be placed in the appropriate order in the PX file.
This principle is the same as for the static images described in the chapter 2.1.
2.2.1 Alarm components
Components with the suffix "alarm" in the name are dedicated to bind Boolean variables
signalling an alarm or failure. Graphics representing the alarm status of the device have been
added to these objects. The component has one control value (Value Binding), which affects

iSMA-B-MAC36NL
Version 1.0 www.gc5.pl Page 9 / 24
the Visibility property. The value of the true component of the Boolean type causes the
graphics to be shown, while false causes the graphics to be hidden.
2.2.2 On/Off components
Components with the suffix "off-on" in the name are dedicated to binding Boolean variables
signalling operation or switching on. Graphics representing the status of switch-off and
switch-on of a given device have been added to these objects. The component has two
control values (Value Binding). The first one affects switching between switching off
graphics (false for horizontal, true for vertical) and operation (true for horizontal, false for
vertical) of the device. The second value affects the Visibility property, where false causes
the graphics to be shown, while true causes the graphics to be hidden (same variable as for
the alarm component above).
Dragging a Boolean component from the Nav tree to a PX file and selecting "From Palette" in
the Make Widget window, and then selecting "From Palette" from the palette of the object
with the "off-on" suffix will automatically pinpoint the dragged component to the control
value described as switching between switch-off and switch-on graphics.
2.2.3 0-100% components
Components with the suffix "0-100" in the name are dedicated to binding Numeric type
variables containing analogue control value in the range of 0% - 100%. Graphics have been
added to these objects to represent the percentage of opening or closing a device. The
component has two control values (Value Binding). The first one affects the switching
between the graphics responsible for the level of opening (or closing) depending on the
entered value from 0 to 100. The second value affects the Visibility property, where false
causes the graphics to be shown, while true causes the graphics to be hidden (same variable
as for the alarm component above).
Dragging a Numeric component from the Nav tree to a PX file and selecting "From Palette" in
the Make Widget window, and then selecting "From Palette" from the palette of the object
with the suffix "0-100" will automatically bind the dragged component to the control value
described as switching between the graphics responsible for the opening (or closing) level.
For horizontal graphic components, the value 0 represents a closing and 100 an opening,
while for vertical components, the value 0 represents an opening and 100 a closing.

iSMA-B-MAC36NL
Version 1.0 www.gc5.pl Page 10 / 24
2.3 Cooling
Figure 5 - sample graphic components from the Cooling folder
The Cooling folder contains dynamic images representing air coolers. Due to the features
described in section 2, the graphic components in the folder must be arranged in the correct
order in the PX file. This principle is the same as for the static images described in the
chapter 2.1.
2.3.1 Alarm components
Components with the suffix "alarm" in the name are dedicated to bind Boolean variables
signalling an alarm or failure. Graphics representing the alarm status of the device have been
added to these objects. The component has one control value (Value Binding), which affects
the Visibility property. The value of the true component of the Boolean type causes the
graphics to be shown, while false causes the graphics to be hidden.
2.3.2 On/Off components
Components with the suffix "off-on" in the name are dedicated to binding Boolean variables
signalling operation or switching on. Graphics representing the status of switch-off and
switch-on of a given device have been added to these objects. The component has two
control values (Value Binding). The first one affects the switching between switching off
graphics (false value) and operation (true value) of the device. The second value affects the
Visibility property, where false causes the graphics to be shown, while true causes the
graphics to be hidden (same variable as for the alarm component above).