Jason.L San Fran System User manual

Special Note: Please ignore any pre-drilled holes or nut inserts that maybe present in your top(s).
They will not match your particular table/desk base and woods screws will be required to be screwed
directly into the underside of the top.
Tools Required: Power screwdriver.
INSTALLATION GUIDE
San Fran System
Round Meeting Table
Sizes: 1200mm, 1350mm , 1500mm
Page 1 of 4
Need help!
Call us on
1300 527 665
www.jasonl.com.au

Leg x4
Adjustable Foot x4
Leg Cable Cover x4
Beams x4
2 Way Connector x4
2 Way Connector Cap x4
Round Table Top x1
Beams Space Bracket x4
Slot nutx4
*
*
*
( * )
1
2
3
4
5
6
7
8
9
M8x20mm Dome Head x8
M8x20mm Cap Head x4
M5x20mm Self Tapping x16
M8x20mm Dome Head x4
1350 & 1500 mm tables only
10
11
12
13
COMPONENTS
SCREWS
Page 2 of 4
INSTALLATION GUIDE
San Fran System
Round Meeting Table
Sizes: 1200mm, 1350mm , 1500mm
Need help!
Call us on
1300 527 665
www.jasonl.com.au
7
12
12
8
13
10
11
4
3
1
2
5
6
9
(260mm or 320mm or 690mm)

01
Slide the 2 way connectors over each leg, and securely lock into place using
M8x20mm cap head bolts.
Ensure the worksurface is centered over the frame. Fully tighten all M5x20mm self
tapping screws through each leg and beams space bracket into the worksurface.
Page 3 of 4
INSTALLATION GUIDE
San Fran System
Round Meeting Table
Sizes: 1200mm, 1350mm , 1500mm
Need help!
Call us on
1300 527 665
www.jasonl.com.au
Loosely connect the longer M8x20mm dome head bolt and slot nut through the beam
spacer bracket. Slide onto beams and fully tighten in place (1350 & 1500 mm tables only).
Securely connect legs to beams lenghts using the shorter
M8x20mm dome head bolts.
02
03 04

Conceal any power cable using the magnetic leg cable covers.
Page 4 of 4
05
INSTALLATION GUIDE
San Fran System
Round Meeting Table
Sizes: 1200mm, 1350mm , 1500mm
Need help!
Call us on
1300 527 665
www.jasonl.com.au