Jay-Lor 5750HD User manual

Owner Manual
5750HD
5850HD
51000HD
51250HD
0208_Jaylor_ManuaL_Cover_2013_Twin5000HD.indd 1 06/10/2014 3:53:56 PM

AAA-055-00187
1 5000 SERIES HD TRAILER OWNER MANUAL
California Proposition 65 Warnings
WARNING: Battery posts, terminals and related accessories contain Lead and Lead
compounds, chemicals known to the State of California to cause cancer and reproductive harm. Wash
hands after handling. For more information go to: www.P65Warnings.ca.gov.
WARNING: This product can expose you to chemicals including Lead and Nickel, which
are known to the State of California to cause cancer and/or reproductive harm. For more information
go to: www.P65Warnings.ca.gov.
Table of Contents
1INTRODUCTION ...................................................................................................................................5
2POLICY STATEMENT...........................................................................................................................6
3OWNER/OPERATOR’S RESPONSIBILITY.........................................................................................6
4LIMITED WARRANTY...........................................................................................................................7
5CONTACT INFORMATION...................................................................................................................8
6SERIAL NUMBER LOCATION.............................................................................................................8
7CUSTOMER REFERENCE INFORMATION.........................................................................................9
8SAFETY...............................................................................................................................................10
8.1 Safety Alert Symbol....................................................................................................................10
8.2 Understand Signal Words..........................................................................................................10
8.3 Safety Guidelines........................................................................................................................10
8.4 General Safety.............................................................................................................................11
8.5 Operating Safety.........................................................................................................................11
8.6 Maintenance and Repair Safety ................................................................................................12
8.7 Hydraulic Safety..........................................................................................................................13
8.8 Tire Safety ...................................................................................................................................13
8.9 Transport Safety.........................................................................................................................14
8.10 Storage Safety.........................................................................................................................14
8.11 Safety Signs.............................................................................................................................14
9SAFETY SIGN-OFF FORM.................................................................................................................15
10 SAFETY SIGN LOCATIONS...........................................................................................................16
10.1 Safety Sign Decal Locations..................................................................................................16
10.2 How to Install Safety Signs....................................................................................................19
11 OPERATION OVERVIEW ...............................................................................................................19
12 MACHINE COMPONENTS..............................................................................................................20
13 PRE-OPERATION CHECKLIST......................................................................................................22
14 BREAKING-IN .................................................................................................................................23
14.1 Before Starting:.......................................................................................................................23
14.2 After Operating for ½ hour:....................................................................................................23
14.3 After operating for 5 hours and 10 hours:............................................................................23

AAA-055-00187
2
15 EQUIPMENT MATCHING SPECIFICATIONS................................................................................24
15.1 Horsepower:............................................................................................................................24
15.2 Drawbar Dimensions:.............................................................................................................24
15.3 Drawbar Attachment:..............................................................................................................25
15.4 PTO Shaft:................................................................................................................................25
15.5 Hydraulic System:...................................................................................................................25
16 CONTROLS .....................................................................................................................................26
16.1 Weighing..................................................................................................................................26
16.1.1 Scale System Overview.........................................................................................................................26
16.1.2 Indicator Mounting and Adjustment....................................................................................................26
16.1.3 Indicator Connections ..........................................................................................................................27
16.1.4 Remote Indicator (Optional) ................................................................................................................27
16.2 Restrictor Blades ....................................................................................................................28
17 SHEAR BOLT PROTECTED DRIVELINE ......................................................................................29
18 DOOR CONFIGURATIONS.............................................................................................................30
18.1 Front Centre Discharge..........................................................................................................30
18.2 Rear Centre Discharge ...........................................................................................................30
18.3 Corner Door Discharge ..........................................................................................................31
18.4 Centre Side (C-Side) Door Discharge ...................................................................................31
18.5 Multiple Door Configuration ..................................................................................................32
19 CONVEYOR OPTIONS....................................................................................................................33
19.1 Flat Conveyors........................................................................................................................33
19.2 Winged Conveyors .................................................................................................................33
19.3 3ft Conveyor ............................................................................................................................34
20 GEARBOX LUBRICATION .............................................................................................................35
21 ATTACHING/UNHOOKING.............................................................................................................36
22 FIELD OPERATION.........................................................................................................................37
22.1 General.....................................................................................................................................37
22.2 Cutting and Mixing Procedure...............................................................................................38
22.3 Unloading Procedure..............................................................................................................39
22.4 Mixing Tips ..............................................................................................................................39
22.5 General Mixing Issues............................................................................................................40
22.5.1 Feed Clogging ......................................................................................................................................40
22.5.2 Entangled Material ..............................................................................................................................40
23 TRANSPORTING.............................................................................................................................41
24 STORAGE........................................................................................................................................42
25 TROUBLESHOOTING.....................................................................................................................43
26 STANDARD MODEL SPECIFICATIONS........................................................................................44
26.1 5750HD Trailer Cutter-Mixer-Feeder .....................................................................................44
26.2 5850HD Trailer Cutter-Mixer-Feeder .....................................................................................45
26.3 51000HD Trailer Cutter-Mixer-Feeder ...................................................................................46
26.4 51250HD Trailer Cutter-Mixer-Feeder ...................................................................................47
27 MAINTENANCE AND SERVICE INFORMATION ..........................................................................48
27.1 Maintenance Safety ................................................................................................................48
27.2 Model and Serial Number.......................................................................................................48
27.3 Following an Effective Maintenance Schedule....................................................................48
27.4 Bolt Torque..............................................................................................................................49
27.5 Fluids and Lubricants.............................................................................................................50

AAA-055-00187
3 5000 SERIES HD TRAILER OWNER MANUAL
27.5.1 Planetary Gearbox Oil ..........................................................................................................................50
27.5.2 2-Speed Transmission Oil .....................................................................................................................53
27.5.3 Greasing...............................................................................................................................................54
27.6 Unloading Conveyor...............................................................................................................56
27.7 Auger Maintenance.................................................................................................................58
27.7.1 Timing ..................................................................................................................................................58
27.7.2 Knives ...................................................................................................................................................59
27.8 Shear Bolt Specifications.......................................................................................................60
27.9 Wheel Maintenance.................................................................................................................60
27.10 Periodic Maintenance Chart...................................................................................................61
28 BRAKE SYSTEM OPERATING AND MAINTENANCE INSTRUCTIONS .....................................62
28.1 Driver’s Daily Checks .............................................................................................................62
28.2 Driver’s Weekly Checks & Maintenance...............................................................................62
28.3 Quarterly and Annual Inspection & Maintenance................................................................62
28.4 Coupling and Decoupling Air Brake System .......................................................................62
29 MAINTENANCE AND SERVICE RECORDS..................................................................................63
30 SAFETY SIGN .................................................................................................................................64
31 PARTICLE SEPARATOR................................................................................................................65
Table of Figures
Figure 1 - Operator Orientation.....................................................................................................................5
Figure 2 - Serial Number Location................................................................................................................8
Figure 3 - Twin Auger Standard Safety Sign Locations..............................................................................16
Figure 4 - ‘Caution’ Not for Highway Travel................................................................................................16
Figure 5 - ‘Danger’ Rotating Auger Hazard and Pinch Point......................................................................17
Figure 6 - ‘Danger’ Rotating Driveline Hazard............................................................................................17
Figure 7 - ‘Warning’ Rotating Part Hazard..................................................................................................18
Figure 8 - ‘Warning’ High Pressure Fluid Hazard .......................................................................................18
Figure 9 - ‘Caution’ Secure Conveyor Discharge........................................................................................19
Figure 10 - 5000 Series Twin Auger Mixer Components............................................................................20
Figure 11 - Drawbar Setting........................................................................................................................24
Figure 12 - Drawbar Attachment.................................................................................................................25
Figure 13 - Scale Indicator Adjustment.......................................................................................................26
Figure 14 - Restrictor Blades ......................................................................................................................28
Figure 15 - Shear Bolt Location ..................................................................................................................29
Figure 16 - Front Centre Door (with 6ft-41in Conveyor).............................................................................30
Figure 17 - Rear Centre Door .....................................................................................................................30
Figure 18 - Front Right Corner Door...........................................................................................................31
Figure 19 - Dual Right Centre Side Doors..................................................................................................31
Figure 20 - Remote Switch Box (Left) and Selector Valve Block (Right)....................................................32
Figure 21 - 8ft Flat Dual Discharge.............................................................................................................33
Figure 22 - 6ft Left Discharge Conveyor with 41in Extension.....................................................................33
Figure 23 - Lock Collars..............................................................................................................................34
Figure 24 - 3ft Conveyor .............................................................................................................................34
Figure 25 - Gearbox Lubricant Reservoir Assemblies................................................................................35
Figure 26 - Conveyor Boot..........................................................................................................................40
Figure 27 - Imperial Bolt Specifications ......................................................................................................49
Figure 28 - Metric Bolt Specifications .........................................................................................................49

AAA-055-00187
4
Figure 29 - Planetary Gearbox....................................................................................................................50
Figure 30 - 2 Speed Transmission Assembly.............................................................................................53
Figure 31 - PTO Shaft Grease Locations....................................................................................................54
Figure 32 - Grease Points on Twin Auger Mixer.........................................................................................55
Figure 33 - Central Grease Decal...............................................................................................................55
Figure 34 - Tension Adjuster Bolt ...............................................................................................................56
Figure 35 - Conveyor Chain Coupler ..........................................................................................................57
Figure 36 - Angling Blade Auger Alignment................................................................................................58
Figure 37 - Slide Plate Auger Alignment.....................................................................................................58
Figure 38 - Auger and Knife Assembly.......................................................................................................59

AAA-055-00187
5 5000 SERIES HD TRAILER OWNER MANUAL
1 INTRODUCTION
Congratulations on your choice of a Jaylor mixer to complement your operation. At Jaylor we want our
customers to have access to leading nutritionists and information. You can visit the Nutrition Section of
our website for articles, advice and upcoming events, or just browse our Social Media sites to see what
other farmers are saying.
www.facebook.com/jaylor OR www.twitter.com/myjaylor
Our team of nutritionists are also available by phone to answer any questions or concerns you might
have.
Safe, efficient and trouble-free operation of your mixer requires that you and anyone else who will be
operating or maintaining the machine reads and understands the safety, operating, maintenance and
troubleshooting information contained within this manual.
This manual covers the 5000 Series HD models manufactured by Jaylor. Keep this manual readily
available for reference and be sure to pass it on to new operators or owners. Contact your nearest Jaylor
dealer or distributor if you need assistance or information.
This equipment has been designed and manufactured for efficient cutting, mixing and feeding of
ingredients destined exclusively for animal consumption.
OPERATOR ORIENTATION - The directions left, right, front, and rear, as mentioned throughout the
manual, are as seen from the tractor driver’s seat and facing forward.
Figure 1 - Operator Orientation

AAA-055-00187
6
2 POLICY STATEMENT
It is the policy of Jaylor to improve its products where it is possible and practical to do so. Jaylor reserves
the right to make changes or improvements in design and construction at any time, without incurring the
obligation to make these changes on previously manufactured units.
3 OWNER/OPERATOR’S RESPONSIBILITY
It is the Owner/Operator’s responsibility to read the Owner Manual, to operate, lubricate, maintain, and
store the product in accordance with all instructions and safety procedures. Failure of the
Owner/Operator to read the Owner Manual is a misuse of this equipment.
Like all mechanical products, Jaylor products will require cleaning and upkeep. It is the Owner/Operator’s
responsibility to inspect the product and to have any part(s) and/or assemblies repaired or replaced when
continued operation would cause damage or excessive wear to other components or cause a safety
hazard.
It is the Owner/Operator’s responsibility to deliver the product to the authorized Jaylor Dealer or
Distributor, from whom it was purchased, for service or replacement of defective parts which are covered
by warranty. Repairs to be submitted for warranty consideration must be made within thirty (30) days of
the failure. It is the Owner/Operator’s responsibility to cover any cost incurred by the Dealer for traveling
to the site or hauling the product for the purpose of performing a warranty obligation or inspection.

AAA-055-00187
7 5000 SERIES HD TRAILER OWNER MANUAL
4 LIMITED WARRANTY
Jaylor (the Seller) warrants the articles and units sold to be free from defects in material and workmanship
and to conform to applicable specifications. These express warranties are the sole warranties of the
Seller, and any other warranties, express, implied in law or implied in fact, are hereby specifically
excluded. Refer to the Owner Manual content for any applicable warranties expressed otherwise.
The Seller’s sole obligation under its warranties will be, at its option, to repair or replace any article or part
thereof which is proved to be other than warranted. Obligation under this warranty will be limited to
replacement or repair of parts found, upon Seller’s inspection, to be defective. All warranties shall expire
12 (twelve) months from the date the unit or article is placed in service, or 12 (twelve) months from the
date the article or unit is delivered by the Seller, whichever expires first.
NO ALLOWANCES WILL BE MADE TO THE BUYER FOR ANY TRANSPORTATION, LABOUR
CHARGES, PARTS ADJUSTMENTS OR REPAIRS, OR ANY OTHER WORK, UNLESS THESE
CHARGES ARE AUTHORIZED IN ADVANCE BY THE SELLER.
The Seller shall in no event be liable for special or consequential damages. If an article is claimed to be
defective in material or workmanship, or does not conform to specifications, the Seller, upon notice
promptly given, will either examine the article or unit at its site, or issue shipping instructions to return to
the Seller. The warranties shall not extend to any articles, units, or parts thereof which have been
installed, used, or serviced, otherwise than in conformance with the Seller’s applicable instructions,
manuals, service bulletins, or, if none, which shall have been articles, units, parts thereof furnished by the
Buyer or acquired from others at the Buyer’s request and/or Buyer’s specifications.
The warranties are not applicable for expenses, either direct or consequential, that may arise from the
use or inability to use the articles and units sold by the Seller. The Seller shall in no event be responsible
for and will not be held liable for losses, injury, or damage caused to persons or property by reason of
operation of Seller’s products or their failure.
No warranty is extended to regular wear items such as fluid, paint, tires, knives, PTOs, crosses
and the like.
The engine and scale system are covered by separate warranties by their respective manufacturers
which can be found in this manual.
This warranty pertains to components manufactured or installed by Jaylor only. This hereby excludes any
warranties offered separately such as those offered by the truck manufacturer. In this event, please refer
to the appropriate Warranty Statements offered by the separate manufacturer.
All claims for warranty must be directed to your dealer or distributor.
WARRANTY VOID IF NOT REGISTERED

AAA-055-00187
8
5 CONTACT INFORMATION
Contact Jaylor at:
071213 10th Line
East Garafraxa, ON
Canada
L9W 6Z9
Phone: [phone]
Fax: [phone]
E-mail: [e-mail]
On the web: www.jaylor.com
6 SERIAL NUMBER LOCATION
Always give your dealer the Model Number and Serial Number of your Jaylor when ordering parts or
requesting service or other information. Depending on the type of service, the Serial Numbers of
individual components and/or assemblies will be required. The Serial Number location required for
servicing your Jaylor Product is shown in Figure 2. For easy reference, please write this information in
Section 0.
Figure 2 - Serial Number Location

AAA-055-00187
9 5000 SERIES HD TRAILER OWNER MANUAL
7 CUSTOMER REFERENCE INFORMATION
Jaylor Model Number:
Jaylor Serial Number:
Date Purchased:
Dealer Name:
Dealer Phone:
Scale Indicator Model Number:
Scale Indicator Serial Number:
Other Main Components:
(E.g. Gearboxes, Hydraulic Motors, etc.)

AAA-055-00187
10
8 SAFETY
All implements with moving parts are potentially hazardous. There is no substitute for a cautious, safe-
minded operator who recognizes the potential hazards and follows reasonable safety practices. The
manufacturer has designed the implement to be used with all its safety equipment properly attached to
minimize the chance of accidents.
BEFORE YOU START!
Read the safety messages on the implement and shown in your manual.
Observe the rules of safety and common sense!
Safety Alert Symbol
This Safety Alert
Symbol means:
-ATTENTION!
-BECOME ALERT!
-YOUR SAFETY IS
INVOLVED!
The Safety Alert Symbol
identifies important safety
messages on your Jaylor mixer
and in this manual. When you
see this symbol, be alert to the
possibility of personal injury or
death. Follow the instructions in
the safety message.
Understand Signal Words
Note the use of the signal words DANGER, WARNING, and CAUTION with the safety messages. The
appropriate signal word for each message has been selected using the following guidelines:
•DANGER – Indicates an imminently hazardous situation that, if not avoided, will result in death or
serious injury. This signal word is to be limited to the most extreme situations typically for machine
components which, for functional purposes, cannot be guarded.
•WARNING – Indicates a potentially hazardous situation that, if not avoided, could result in death or
serious injury, and includes hazards that are exposed when guards are removed. It may also be
used to alert against unsafe practices.
•CAUTION – Indicates a potentially hazardous situation that, if not avoided, may result in minor or
moderate injury. It may also be used to alert against unsafe practices.
If you have any questions not answered in this manual or require additional copies or the manual is
damaged, please contact your dealer or manufacturer directly.
Safety Guidelines
YOU are responsible for the SAFE operation and maintenance of your Jaylor mixer. YOU must ensure
that YOU and ANYONE who is going to operate, maintain or work around the Jaylor mixer be familiar
with the owner procedures and related SAFETY information contained in this manual. This manual will
take you step-by-step through your working day and alert you to safety practices that should be adhered
to while operating the machine.
Remember, YOU are the key to SAFETY. Good safety practices not only protect you but also the
people around you. Make these practices a working part of your safety program. Be certain that
EVERYONE operating this equipment is familiar with the recommended operating and maintenance
procedures and follows all the safety precautions. All accidents can be avoided. Do not risk injury or
death by ignoring good safety practices.
•Vertical mixer owners MUST give operating instructions to operators or employees before allowing
them to operate the machine, and at least annually thereafter.

AAA-055-00187
11 5000 SERIES HD TRAILER OWNER MANUAL
•The most important safety device on this equipment is a SAFE OPERATOR. It is the operator’s
responsibility to read and understand ALL safety and operating instructions in this manual and to
FOLLOW THEM.
•Jaylor feels that a person who has not read and understood all operating and safety instructions is
not qualified to operate the machine. An untrained operator exposes himself and bystanders to
possible serious injury or death.
•Do not modify the equipment in any way. Unauthorized modification may impair the function, safety,
and life of the equipment as well as possibly voiding the warranty.
Think SAFETY! Work SAFELY!
General Safety
Read and understand this manual and all safety signs before operating, servicing, maintaining or
adjusting the vertical mixer.
Only trained competent persons shall operate the vertical mixer. An untrained operator is not
qualified to operate the machine.
Have a first-aid kit available for use should the need arise and know how to use it.
Provide a fire extinguisher for use in case of a fire. Store in a highly visible place.
Do not allow riders on the vertical mixer.
Wear protective gear such as hearing protection, footwear with slip resistant soles, and the like.
Place controls in neutral, stop engine, disengage power source, set park brake, remove ignition
key and wait for all moving parts to stop before servicing, adjusting, repairing, or unplugging.
Do not operate this machinery under the influence of any alcohol, drugs or medication.
Review safety related items annually with all personnel who will be operating or maintaining the
vertical mixer.
Operating Safety
Read and understand this manual and all safety signs before using the vertical mixer.
Place controls in neutral, stop engine, disengage power source, set park brake, remove ignition
key and wait for all moving parts to stop before servicing, adjusting, repairing, or unplugging.
Stay away from unloading door and conveyor discharge when unloading or moving.
Do not operate when guards are damaged or removed.
Keep hands, feet, clothing and hair away from all moving and/or rotating parts.
Do not allow riders on the machine during operation or transporting.
Clear the area of bystanders, especially small children, before starting.

AAA-055-00187
12
Attach securely to the tractor using a retainer on the drawbar pin and a safety chain.
Stay out of the mixing chamber and away from the auger when engine is running. Keep others
away.
Stay away from overhead power lines when loading. Electrocution can occur without contact.
Clean reflectors, lights, SMV signs, before transporting.
Use hazard flashers on tractor when transporting. Follow all local laws and regulations when
transporting the machine on public roads and highways.
Before applying pressure to the hydraulic system, make sure all components are tight and that
hoses and couplings are in good condition.
Review safety instructions with all personnel annually.
Maintenance and Repair Safety
Follow ALL the operating, maintenance, and safety information in the manual.
Only properly trained personnel should maintain and repair this equipment.
Support the machine with blocks or safety stands when changing tires or working beneath.
Follow good shop practices:
Keep service areas clean and dry.
Be sure electrical outlets and tools are properly grounded.
Use adequate lighting for the job at hand.
Use only tools, lifting equipment, and safety stands of sufficient capacity for the job.
Place controls in neutral, stop engine, set park brake, remove ignition key, and wait for all
moving parts to stop before servicing, adjusting, repairing, or unplugging.
Relieve pressure from the hydraulic circuit before servicing or disconnecting from the tractor.
Make sure all guards are in place and properly secured when maintenance work is completed.
Before applying pressure to a hydraulic system, make sure all lines, fittings, and couplers are
tight and in good condition.
Keep hands, feet, hair, and clothing away from all moving and/or rotating parts.
Maintain fasteners in running gear systems at their specified torque at all times.

AAA-055-00187
13 5000 SERIES HD TRAILER OWNER MANUAL
Clear the area of bystanders, especially children, when carrying out any maintenance and
repairs or making any adjustments.
Do not allow grease or oil to build up on the machine.
Hydraulic Safety
Make sure that all components in the hydraulic system are kept in good condition and are clean.
Replace any worn, cut, abraded or flattened hoses or metal lines immediately.
Relieve pressure before working on hydraulic systems.
Do not attempt any makeshift repairs to the hydraulic fittings or hoses. The hydraulic system
operates under extremely high pressure. Such repairs will fail suddenly and create a hazardous
and unsafe condition.
Wear proper hand and eye protection when searching for a high-pressure hydraulic leak. Use a
piece of wood or cardboard as a backstop instead of hands to isolate and identify a leak.
If injured by a concentrated high-pressure stream of hydraulic fluid, seek medical attention
immediately. Serious infection or toxic reaction can develop from hydraulic fluid piercing the
skin surface.
Before applying pressure to the system, make sure all components are tight and that lines,
hoses, and couplings are not damaged.
Tire Safety
Failure to follow proper procedures when mounting a tire on a wheel or rim can produce an
explosion, which may result in serious injury or death.
Do not attempt to mount a tire unless you have the proper equipment and experience to do the
job.
Have a qualified tire dealer or repair service perform required tire maintenance.

AAA-055-00187
14
Transport Safety
Make sure you are in compliance with all local regulations regarding transporting equipment on
public roads and highways.
Make sure the SMV (Slow Moving Vehicle) emblem and all the lights and reflectors that are
required by the local highway and transport authorities are in place, are clean and can be seen
clearly by all overtaking and oncoming traffic.
Attach securely to the tractor using a retainer on the drawbar pin and a safety chain.
Do not allow anyone to ride on the machine or tractor during transport.
Do not exceed 10 mph (15 km/h). Reduce speed on rough roads and surfaces.
Always use hazard warning flashers on tractor when transporting unless prohibited by law.
Drive carefully and defensively at all times and especially when negotiating uneven or hilly
terrain.
Watch for overhead obstructions. Stay away from power lines and low tree branches.
Use only a tractor with adequate brakes to stop the tractor coupled with the machine and
payload.
Storage Safety
Store unit in an area away from human activity.
Do not permit children to play on or around the stored machine.
Store the unit in a dry, level area. Support the machine with planks if required.
Make sure the implement jack is properly pinned to the mounting bracket.
Safety Signs
Keep safety signs clean and legible at all times.
Replace safety signs that are missing or have become illegible.
Safety signs are available from your dealer, distributor, or the factory.

AAA-055-00187
15 5000 SERIES HD TRAILER OWNER MANUAL
9 SAFETY SIGN-OFF FORM
Jaylor follows the general Safety Standards specified by the American Society of Agricultural and
Biological Engineers (ASABE) and the Occupational Safety and Health Administration (OSHA). Anyone
who will be operating and/or maintaining the machine must read and clearly understand ALL Safety,
Operating, and Maintenance information presented in this manual.
Do not operate or allow anyone else to operate this equipment until such information has been reviewed.
Annually review this information with personnel.
Make these periodic reviews of SAFETY and OPERATION a standard practice for all of your equipment.
We feel that an untrained operator is unqualified to operate this machine.
A sign-off sheet is provided for your record keeping to show that all personnel who will be working with
the equipment have read and understand the information in the Operator’s Manual and have been
instructed in the operation of the equipment.
SIGN-OFF FORM
DATE
EMPLOYEE’S SIGNATURE
EMPLOYER’S SIGNATURE

AAA-055-00187
16
10 SAFETY SIGN LOCATIONS
The types of safety signs and typical locations on the equipment are shown in the illustrations that follow.
Good safety requires that you familiarize yourself with the various safety signs, the type of warning and
the area of particular function related to that area which requires your SAFETY AWARENESS.
Think SAFETY! Work SAFELY!
Safety Sign Decal Locations
Figure 3 - Twin Auger Standard Safety Sign Locations
1. ‘Danger’ Rotating Auger Hazard and Pinch Point Figure 5*
2. ‘Danger’ Rotating Driveline Hazard Figure 6
3. ‘Caution’ Not for Highway Travel Figure 4
4. ‘Warning’ Rotating Part Hazard Figure 7
5. i. ‘Warning’ Rotating Part Hazard Figure 7
ii. ‘Warning’ High Pressure Fluid Hazard Figure 8
6. ‘Caution’ Secure Conveyor Discharge Figure 9
*This decal will be located near every unloading door on the machine
Figure 4 - ‘Caution’ Not for Highway Travel

AAA-055-00187
17 5000 SERIES HD TRAILER OWNER MANUAL
Figure 5 - ‘Danger’ Rotating Auger Hazard and Pinch Point
Figure 6 - ‘Danger’ Rotating Driveline Hazard

AAA-055-00187
18
Figure 7 - ‘Warning’ Rotating Part Hazard
Figure 8 - ‘Warning’ High Pressure Fluid Hazard

AAA-055-00187
19 5000 SERIES HD TRAILER OWNER MANUAL
Figure 9 - ‘Caution’ Secure Conveyor Discharge
REMEMBER – If Safety Signs have been damaged, removed, become illegible, or parts were replaced
without signs, new signs must be applied. New signs are available from your authorized
dealer or distributor.
How to Install Safety Signs
•Be sure the installation area is clean, dry and is above 10°C (50°F).
•Remove the smallest portion of the split backing paper.
•Align the sign over the specified area and press the small sticky portion in place.
•Peel back the remaining paper and smooth the remaining portion of the sign in place.
11 OPERATION OVERVIEW
The Jaylor mixer is specifically designed to cut and mix feed ingredients into a total mixed ration (TMR).
Many of the features incorporated into this machine are the result of suggestions made by customers like
you. We greatly appreciate any input you may have, and would like to thank you in advance for any you
may give.
Read this manual carefully to learn how to operate the machine safely and how to adjust it to provide
maximum efficiency. Following the operating instructions with a proper maintenance program will extend
the life of your machinery.