jbc DSV-DS User manual

www.jbctools.com
Heating Element
Ref. DSV-DS

1. Remove the filter before changing the heating element.
Fixing screw
Heating element
Ref. DSV-DS
2. Undo the fixing screw and remove the heating element.
Micro Desoldering Iron
Ref. DS360-A
Filter
Ref. 0008473
2
Changing the Heating Element

3. Place the new heating element.
Filter
Fixing screw
4. Tighten the fixing screw and place the filter again.
3
www.jbctools.com

Warranty
JBC’s 2 year warranty covers this
equipment against all manufacturing
defects, including the replacement of
defective parts and labour.
Warranty does not cover product wear
due to use or mis-use.
In order for the warranty to be valid,
equipment must be returned, postage
paid, to the dealer where it was
purchased.
This product should not be thrown in the garbage.
In accordance with the European directive 2002/96/EC,
electronic equipment at the end of their life must be collected
and returned to an authorized recycling facility.
www.jbctools.com
0008958-0614