jbc SCD User manual

INSTRUCTION MANUAL
SCD, SCDA,
SCDD, SCDP
Tool Holders for
Compact Stations

2
The following items are included:
Tool Holder................. 1 unit
according to purchased reference
Manual ....................... 1 unit
Ref. 0028656
This manual corresponds to the following references:
0012994 SCD for CD
0014706 SCDA for CA and CF
0014720 SCDD for CDD
0014719 SCDP for CP
Packing List
Before carrying out maintenance, always unplug the tool.
Allow the equipment to cool down. Be sure that the power
supply is disconnected before changing any spare part.
Replacement

3
Changing the Tool Holder
Pull the tool holder gently until the connector comes out.
Turn the station off and allow the equipment to cool down.
Remove the locking knob (1) and separate the holder from the
station. Then remove the connection screw (2).
max.
15 mm
Locking
Knob
Place the new tool holder following the same steps conversely.
Connection
Screw
Connector
Tool
Holder
2
1

This product should not be thrown in the garbage.
In accordance with the European directive 2012/19/EU, electronic
equipment at the end of its life must be collected and returned to an
authorized recycling facility.
Warranty
JBC’s 2 year warranty covers this equipment against all manufacturing defects,
including the replacement of defective parts and labour.
Warranty does not cover product wear or misuse.
In order for the warranty to be valid, equipment must be returned, postage paid, to
the dealer where it was purchased.
40 mm
50 mm
60 mm
80 mm
100 mm
130 mm 130 mm
para manuales - color gris
200 mm
300 mm
0028656-0122
Specifications
SCD / SCDA / SCDD / SCDP
Tool Holders for Compact Stations
Ref.: 0012994 SCD for CD
Ref.: 0014706 SCDA for CA and CF
Ref.: 0014720 SCDD for CDD
Ref.: 0014719 SCDP for CP
- Package Dimensions: 111 x 81 x 41 mm
(L x W x H) 4.37 x 3.19 x 1.61 in
Complies with CE standards.