jbc FAE050 User manual

Fume Inlet Duct
for Modular Stands
Ref. FAE050
INSTRUCTION MANUAL
www.jbctools.com

INSTRUCTION MANUAL
Packing List
The following items should be included:
Connection
Fume Inlet Duct
for Modular Stands ................................. 1 unit
Ref. FAE050
Manual ........................................................... 1 unit
R ef. 0 019 112
Fume Inlet Duct
for Modular Stands
Ref. FAE050
1Turn the knob counterclockwise until it
loosen.
2Insert the fume inlet duct for modular stands
between the knob and the tool holder.
2
www.jbctools.com

4The system detects when the tool is returned
to the stand and the vent absorbs the fumes
automatically.
3Connect the fume inlet duct for modular
stands to the accessory for stand aspiration
(Ref. FAE030/FAE040).
Maintenance
- Before carrying out maintenance, always allow the tool to cool.
- Remove the screw and loosen the upper cover.
- Clean the inside of the aspiration intake with a cleaning stick.
- To clean the tube, loosen it from the aspiration intake by turning it. Then shake the tube to remove
the dirt.
Tube
Upper cover
Aspiration
intake
www.jbctools.com
3

This product should not be thrown in the garbage.
In accordance with the European directive 2002/96/EC, electronic equipment at the end of their life
must be collected and returned to an authorized recycling facility.
Manual in other languages available on our website
Warranty
JBC’s 2 year warranty covers this equipment against
all manufacturing defects, including the replacement
of defective parts and labour.
Warranty does not cover product wear or misuse.
In order for the warranty to be valid, equipment must
be returned, postage paid, to the dealer where it was
purchased.
Register your warranty within 30 days of purchase
in www.jbctools.com/productregistration
Specifications
- Weight: 170 gr (0.02 lb)
- Length: 107 cm (42.1 in)
Complies with CE standards.
ESD protected.
0019112-0917 www.jbctools.com