jbc JN2020 User manual

www.jbctools.com
Nozzles
for JT-TA Heater

2
Nozzle models
REF SHAPE & SIZE REF SHAPE & SIZE
JN2020 Straight - Ø 8mm JN6633 Bent - Ø 8mm
JN8417 Straight - Ø 10mm JN7637 Flat - 10 x 2mm
JN2015 Bent - Ø 4mm JN7638 Flat - 20 x 2mm
JN2012 Bent - Ø 6mm JN7639 Flat - 30 x 2mm
Straight Bent Flat
Ø mm Ø mm A x B mm

3
In case of misalignment of the nozzle with the JT-TA heater:
1. Bend down the nozzle tab with a screwdriver or flat nosed pliers.
Maintenance
2. Insert the nozzle into the JT-TA heater again

This product should not be thrown in the garbage.
In accordance with the European directive 2002/96/EC, electronic
equipment at the end of their life must be collected and returned to
an authorized recycling facility.
Manual in other languages available on our website
Warranty
JBC’s two-year warranty covers this equipment
against all manufacturing defects, including the
replacement of defective parts and labour.
Warranty does not cover product wear or misuse.
In order for the warranty to be valid, equipment
must be returned, postage paid, to the dealer
where it was purchased. Please register your
product warranty within 30 days of purchase
in www.jbctools.com/productregistration.
www.jbctools.com
00021603-0418