jbc PH222 User manual

English
www.jbctools.com
Thermally
Conductive Tapes
Ref. PH222 / PH223

How to use
2. Place the PCB with the tape on the PCB Holder. After use it can be
easily removed without leaving any residue. It can also be reused.
High emissivity tape provides a 10x faster and more uniform preheating
of PCBs with metal substrates due to greater absorption of infrared.
Resistant and reusable tapes. Does not deform after use.
Supplied in reels for easy cutting.
PCB with
metal substrats
Packing List
Features
The following items should be included:
Thermally Conductive Tape
Ref. PH222
Thermally Conductive Tape
Ref. PH223
Thermally
Conductive Tape .......... 1 unit
See the reference below.
Manual ............................. 1 unit
Ref. 0014928
50 mm 25 mm
1. Cut the tape to size and fix onto the underside of the PCB.
JBC recommends covering the whole underside. Partial covering may
cause deformity or damage to the PCB due to an unequal heating.
IR Preheater
Ref. PH-B
PCB Holder
Ref. PH321
Thermally
conductive
tape
2 3
www.jbctools.com

www.jbctools.com
Warranty
JBC’s 2 year warranty covers this device
against all manufacturing defects,
including the replacement of defective
parts and labour.
Warranty does not cover product wear
due to use or mis-use.
In order for the warranty to be valid,
equipment must be returned, postage
paid, to the dealer where it was
purchased.
0014928-0515
This product should not be thrown in the garbage.
In accordance with the European directive 2002/96/EC,
electronic equipment at the end of their life must be
collected and returned to an authorized recycling facility.
- Weight: PH222 - 440 g (1 lb)
PH223 - 262 g (0.5 lb)
- Width: PH222 - 50 mm
PH223 - 25 mm
- Reel length: 15 m
- Maximum operating temperature: 250ºC (482ºF)
Comply with CE standards
Specifications