jbc CL6166 User manual

ESD Tip Cleaner
Ref. CL6166
www.jbctools.com

Improve thermal transfer by cleaning the tip after each solder joint.
Features
Packing list
Brass wool
Ref. CL6210
Splashguard Non-slip base
Sponge
Ref. S0354
ESD Tip Wiper
Ref. CL0240
Very effective cleaning method.
It leaves a small layer of solder
on the tip to prevent oxidation
between cleaning
and rewetting.
It prevents splashing of solder
particles. Also used for
sponge or brushes.
No need to hold the base
while cleaning tips.
The least harmful cleaning
method. Keep the sponge
damp with distilled water
when working to avoid
tip wear.
A temperature resistant receptacle
lets the operator remove excess
solder by gentle tapping or wiping.
Tapping: Wiping:
Tap to remove excess
solder.
Use the slots to remove
remaining particles.
Sponge ............................1 unit
Ref. S0354
ESD Tip Cleaner ........... 1 unit
Ref. CL6166
Manual ............................ 1 unit
Ref. 0018430
Tip Cleaner
Ref. CL6166
The following items should be included:
2
www.jbctools.com

Wiper can be easily
removed for cleaning.
Optional
Wool Replacement
Metal Brush replacement
Tip Wiper replacement
Inox wool
Ref. CL6205
Brushes
Ref. CL6220
Tip-tinner
Re f. T T-A
Sand
Re f. C L6211
1
1
1
3
4
2
32
4
www.jbctools.com
3

This product should not be thrown in the garbage.
In accordance with the European directive 2002/96/EC, electronic equipment at the end of their life
must be collected and returned to an authorized recycling facility.
Manual in other languages available on our website
Warranty
JBC’s 2 year warranty covers this equipment
against all manufacturing defects, including the
replacement of defective parts and labour.
Warranty does not cover product wear or misuse.
In order for the warranty to be valid, equipment
must be returned, postage paid, to the dealer
where it was purchased.
Specifications
- Weight: 0.9 kg (1.9 lb)
- Dimensions: 110 x 90 x 90 mm (4.33 x 3.54 x 3.54 in)
ESD Safe
Complies with CE standards
0018430-0716 www.jbctools.comwww.jbctools.com