Place the �n on the gears
Your sta�ons is being updated
Do you want to update firmware?
EARTH FUSE F1.25 A
USE ONLY WITH A 250 V FUSE
EARTH FUSE F1.25 A
Place the �n on the gears
Your sta�ons is being updated
Do you want to update firmware?
EARTH FUSE F1.25 A
USE ONLY WITH A 250 V FUSE
EARTH FUSE F1.25 A
1
2
Inlet
Nozzle
Wire
Guidance
Solder Wire Loading
Pass the solder wire through the wire guidance
and introduce the solder wire into the inlet nozzle
(1) until it reaches the wheels (2).
Make sure the wire passes through the
Intermediate Nozzle (5) and enters into the
Guide Tube (6).
Guide
Tube
Wheels
Intermediate
Nozzle
65
Acces to Main Menu by , select “Feeder Settings” (1) and then “Wire Diameter” (2) to adjust the
value to the current solder wire diameter.
1
2
Select “Tin Reloaded Process” (1) and then use to feed the solder wire and advance until it
comes out through the outlet nozzle. Keep pressed and after a while, the wire will advance
faste r.
Main Menu Screen
Tin Reloaded Process Screen
Wire
1
Place the �n on the gears
Your sta�ons is being updated
Do you want to update firmware?
EARTH FUSE F1.25 A
USE ONLY WITH A 250 V FUSE
EARTH FUSE F1.25 A
Place the �n on the gears
Your sta�ons is being updated
Do you want to update firmware?
EARTH FUSE F1.25 A
USE ONLY WITH A 250 V FUSE
EARTH FUSE F1.25 A
1
2
Inlet
Nozzle
Wire
Guidance
Solder Wire Loading
Pass the solder wire through the wire guidance
and introduce the solder wire into the inlet nozzle
(1) until it reaches the wheels (2).
Make sure the wire passes through the
Intermediate Nozzle (5) and enters into the
Guide Tube (6).
Guide
Tube
Wheels
Intermediate
Nozzle
65
Acces to Main Menu by , select “Feeder Settings” (1) and then “Wire Diameter” (2) to adjust the
value to the current solder wire diameter.
1
2
Select “Tin Reloaded Process” (1) and then use to feed the solder wire and advance until it
comes out through the outlet nozzle. Keep pressed and after a while, the wire will advance
faste r.
Main Menu Screen
Tin Reloaded Process Screen
1
AP250
AL250
AL250
SF280
SF250
ALE250
Solder Wire Dragging Button
Forward the solder wire by pushing the dragging button (4) until the wire comes out of the tip (5).
4
5
Solder Wire Feeding
To feed the solder wire, alternatively, the pedal
P405 can be used. The pedal should be plugged
in at the rear of the feeder control unit into the
pedal connector.
7
40 mm
50 mm
60 mm
80 mm
100 mm
130 mm 130 mm
para manuales - color gris
200 mm
300 mm
