2
Improve thermal transfer by cleaning the tip after each solder joint.
Features
Packing list
Brass wool
Ref. CL6210
Splashguard
Non-slip base
Sponge
Ref. S0354
Tip Wiper
Ref. CL0236
Very effective cleaning method.
It leaves a small layer of
solder on the tip to
prevent oxidation
between cleaning
and rewetting
It minimises splashing of
solder particles when using
the metal or brass wool
You don’t need to hold the
base while cleaning tips
The least harmful cleaning method.
Keep the sponge damp with destilled
water when working to avoid tip wear
A temperature resistant receptacle allows the
operator to remove excess solder by gently
tapping or wiping
Tapping: Wiping:
Tap gently to remove
the excess of solder
Use the slots to wipe off
any remaining particles
Sponge ................................1 unit
Ref. S0354
Tip Cleaning
Stand ....................................1 unit
Ref. CL9885
Manual ................................ 1 unit
Tip Cleaning System
Ref. CL9885
The following items should be included:
ww w.j bc too ls.c om
