jbc HA245A-5B User manual

Soldering Unit
Ref. HA245A-5B / HA470A-5B
INSTRUCTION MANUAL
www.jbctools.com

Packing List
Either TRA245 or TRA470 are included.
Soldering Iron
for Automation .............. 1 unit
Ref. TRA245-B: Works with R245 cartridges
Ref. TRA470-B: Works with R470 cartridges
Manual ......................... 1 unit
Ref. 0024884
2

The following items are included in SFR-A box:
Download the Robot Communication Protocol for SFR at www.jbctools.com/jbcsoftware.html
Allen Key 1,5 mm ......... 1 unit
Ref. 0741610
Reel Support .............. 1 unit
Ref. 0024561
Solder Feeder for
Automation .................... 1 unit
Ref. SFR-A
Communications
Cable 3 m........................ 1 unit
Ref. 0024563
Spanner 10 mm........... 1 unit
Ref. 0017631
Allen Key 2,5 mm ........ 1 unit
R ef. 0 012574
Screws
DIN 912 M4x65.......... 2 units
Ref. 0024552
Screws
DIN 912 M4x20........ 2 units
Ref. 0921890
Manual ............................ 1 unit
Ref. 0024557
Insulator ........ 1 unit
Ref. 0024588
Allen Key 3 mm ......... 1 unit
Ref. 0013609
Screws
DIN 7991 M4x10........ 1 unit
Ref. 0490180
www.jbctools.com
3

The following items are included in UCR245-5A/UCR470-5A box:
Manual ........................... 1 unit
Ref. 0021384
Tool Cable 3m ................ 1
unit
Ref. 0021403
Communications
Cable 3m ........................ 1 unit
Ref. 0020261
Control Box for Automation ................ 1 unit
Ref. UCR245-5A
UCR470-5A
Power Cord 1.5m ........ 1 unit
Ref. 0009401
Ref. UCR245-5A/UCR470-5A
Control Box for Automation
www.jbctools.com
INSTRUCTION MANUAL
4

Cartridge Stand for Automation .......... 1 unit
Ref. CS2R245-A
CS2R470-A
Screw ........................................................... 1 unit
DIN 912 M6x20
Ref. 0842925
Washer ............................ 1 unit
DIN 125 Ø6.4 mm
Ref. 0842925
Manual ............................................................. 1 unit
Ref. 0021526
The following items are included in CS2R245-A/CS2R470-A box:
Ref. CS2R245-A /CS2R470-A
Cartridge Stand for Automation
www.jbctools.com
www.jbctools.com
5

Tip Cleaner for
Automation .... 1 unit
Ref. CLMR-A
Metal Brushes ............ 1 unit
Ref. CLMU-A8
(2 brushes)
Manual .................... 1 unit
Ref. 0020354
Connector Cable (3m)........ 1 unit
Ref. 0020261
The following items should be included in CLMR-A box:
Ref. CLMR-A
Tip Cleaner
for Automation
www.jbctools.com
6

Specifications
UCR245-5A 85 - 265V 50/60Hz. Input fuse: 2A. Output: 22V.
UCR470-5A 85 - 265V 50/60Hz. Input fuse: 4A. Output: 42V.
- Net Weight: 2.20 kg (4.9 lb)
- Dimensions: 210 x 162 x 75 mm (8.3 x 6.4 x 3.0 in)
- Output Peak Power (on UCR245-5A): 160W
- Output Peak Power (on UCR470-5A): 250W
- Temperature Range: 90 - 500 °C (190 - 932 °F)
- Idle Temp. Stability (still air): ±1.5 ºC / ±3 ºF
- Tip to ground resistance: < 2 ohms
- Tip to ground voltage: < 2mV RMS
- Ambient operating temp: 10 - 40 ºC (50 - 104 ºF)
- Connections: Communications: M8-5pins
Tool: M16-8pins
TRA245-A
- Net Weight: 715 g (1,575 lb)
- Dimensions: 132x 187x 110 mm (5,21x 7,38x 4,35 in)
- Operating pressure 1,5 to 7 bar / 20 to 100 psi
TRA470-A
- Net Weight: 720 g (1,587lb)
- Dimensions: 132x 190x 110 mm (5,21x 7,48x 4,35 in)
- Operating pressure 1,5 to 7 bar / 20 to 100 psi
SFR-A
- Net Weight: 948 gr (2.09lb)
- Total Weight: 1246gr (2.4lb)
- Dimensions: 114 x 66 x 52 mm (4.49 x 2.60 x 2.05 in)
- Power Supply input: 24Vdc (±5%). 1.5 A current required
- Spool Capacity: Up to 1 kg (2.20 lb)
- Solder Wire Reel Dimensions: Max. lenght 80mm (3.2 in),
Max.diam. 80mm(3.2 in)
- Max. Speed: 120 mm/s (4.72 in/s)
- Ambient Operating Temp.: 10 - 50 ºC (50 - 122 ºF)
- Connections: M8-5 pin Commmunication Connector
CS2R245-A or CS2R470-A
- Net Weight: 690 g (1.51lb)
- Dimensions: 153 x 82 x 97 mm (6.02 x 3.23 x 3.82 in)
CLMR-A
- Net Weight: 2,7 kg (5.9 lb)
- Dimensions: 137 x 153 x 110 mm (5.4 x 6.0 x 4.3 in)
- Brush diameter: 50 mm (2.0 in)
Complies with CE Standards.
ESD safe.
www.jbctools.com
7

0024913-0520
This product should not be thrown in the garbage.
In accordance with the European directive 2012/19/EU, electronic equipment at the end of its life must
be collected and returned to an authorized recycling facility.
Warranty
JBC’s 2 year warranty covers this equipment against
all manufacturing defects, including the replacement
of defective parts and labour.
Warranty does not cover product wear or misuse.
In order for the warranty to be valid, equipment must
be returned, postage paid, to the dealer where it was
purchased.
www.jbctools.com