jbc PA120-A User manual

Micro Tweezers
Ref. PA120-A
www.jbctools.com

Features
2
C120 Cartridges
(Required but not supplied)
Control Unit
Ref. DI, DDE, DME, CP
Stand
Ref. PA-SD
Manual
Packing List
The following items should be included:
Micro Tweezers
Ref. PA120-A
Micro Tweezers
Ref. PA120-A
Micro Tweezers
Ref. PA120-A
ww w.j bc too ls.c om

3
Changing cartridge
Compatible cartridges
The PA120-A Micro Tweezers works with C120 cartridge range. Find the model that best suits your
soldering needs in www.jbctools.com
Turn the station off and follow these guidelines for a safe cartridge change:
Important: Insert the cartridge to the mark
for a proper connection.
Mark
1. Removing 2. Inserting
Loosen the screw and remove the cartridge.
Use a flat pliers if the cartridge is still hot.
3. Aligning
Use a flat pliers for a safe tip alignment.
Do not over-tighten the screw.
Alignment
Important: Tighten the screw. This is
necessary for the tool to function.
4. Fixing
www.jbctools.com

- Maximum power per cartridge: 40W
- Weight without cartridges: 102 g
- ESD Safe
Specifications
This product should not be thrown in the garbage.
In accordance with the European directive 2002/96/EC, electronic equipment at the end of their life
must be collected and returned to an authorized recycling facility.
0008846-0714
Warranty
JBC’s 2 year warranty covers this equipment
against all manufacturing defects, including the
replacement of defective parts and labour.
Warranty does not cover product wear due to use
or mis-use.
In order for the warranty to be valid, equipment
must be returned, postage paid, to the dealer
where it was purchased.
www.jbctools.com