JK Audio CellTap User manual

CellTap
Wireless Telephone Tap
Users Guide
Telephone Interface Products
JK Audio

Connections
Connect CellTap between the 2.5 mm earpiece
jack of your cell phone and your earpiece or
headset. Now connect a tape recorder or powered
speakers to the 3.5 mm mini jack. This audio
output contains a nice mix of both sides of the
conversation.
To recorder or
powered speakers
Description
Group Listen - Simply connect a powered speaker
to the audio output jack and you will have a new
conferencing capability. Everyone in the room can
hear your conversation, but only the person
wearing the headset can talk to the distant party.
While this is not a speakerphone, in many cases it
is better.

Connections
Connect CellTap between the 2.5 mm earpiece
jack of your cell phone and your earpiece or
headset. Now connect a tape recorder or powered
speakers to the 3.5 mm mini jack. This audio
output contains a nice mix of both sides of the
conversation.
To recorder or
powered speakers
Description
Group Listen - Simply connect a powered speaker
to the audio output jack and you will have a new
conferencing capability. Everyone in the room can
hear your conversation, but only the person
wearing the headset can talk to the distant party.
While this is not a speakerphone, in many cases it
is better.

Specifications
Audio
Output: Connector 3.5mmMonoJack
OutputImpedance 600ohms
Level 100mVRMS
Isolation 1500 VRMS
Headset
Jack: Connector 2.5mm Micro Jack
Wireless
Phone
Jack: Connector ¼” - 3 conductor
(36” cable provided - ¼”- 3
conductor to 2.5 mm 3
conductor)
Passive, no AC or battery power needed.
Connections
CellTap must be used with an earpiece or headset.
Your cell phone will not recognize CellTap on its
own.
Although CellTap is designed to work with any cell
or wireless phone that accepts a third party
earpiece or headset, there are no standards for
this connection and we cannot guaranty
compatibility.
Note: Wireless phones generate substantial radio
frequency (RF) noise during a call which can
easily leak into audio cables or equipment. Be
sure to keep the wireless phone one to two feet
away from any audio cables or equipment. It is
also important to keep the wireless adapter cord
away from any other audio cords.

Specifications
Audio
Output: Connector 3.5mmMonoJack
OutputImpedance 600ohms
Level 100mVRMS
Isolation 1500 VRMS
Headset
Jack: Connector 2.5mm Micro Jack
Wireless
Phone
Jack: Connector ¼” - 3 conductor
(36” cable provided - ¼”- 3
conductor to 2.5 mm 3
conductor)
Passive, no AC or battery power needed.
Connections
CellTap must be used with an earpiece or headset.
Your cell phone will not recognize CellTap on its
own.
Although CellTap is designed to work with any cell
or wireless phone that accepts a third party
earpiece or headset, there are no standards for
this connection and we cannot guaranty
compatibility.
Note: Wireless phones generate substantial radio
frequency (RF) noise during a call which can
easily leak into audio cables or equipment. Be
sure to keep the wireless phone one to two feet
away from any audio cables or equipment. It is
also important to keep the wireless adapter cord
away from any other audio cords.

Warranty
The model QuickTap is covered by a 2 year
warranty to be free from defective workmanship
and materials. In the event that the QuickTap
needs repair, you must call us to get an
authorization, and then carefully pack and ship it
to us. You will pay for shipping to us and we will
pay for return back to you, UPS ground. No free
repairs will be made if the defect was caused by
misuse, weather conditions, or other cause,
except for defective workmanship or materials.
THERE ARE NO EXPRESS OR IMPLIED
WARRANTIES WHICH EXTEND BEYOND THE
WARRANTY HERE MADE.
12/01
JK Audio Inc.
2701 N. 45th Road, Sandwich, IL 60548 [phone]
www.jkaudio.com [email protected]