John Lewis 803/50402 User manual

Alpha bed
Small double
Stock number white: 803 50402
Stock number grey: 803 50201
Double Stock number white: 803 50404
Stock number grey: 803 50202
H100 W141.5 D196.5cm
H100 W126.5 D196.5cm

1
Thank you for purchasing the Alpha bedstead. Please read the instructions and warnings carefully before use, to
ensure safe and satisfactory operation of this product.
At John Lewis, we are committed to making great products possible.
From our in-house Design Team, to our Buyers, we work together to bring great design to life.
Our expert Product Technologists work collaboratively with our buyers and suppliers to assure the legality, safety
and quality of the product we sell.
We are all committed to designing and developing products to the highest industry standards.
We hope you are happy with your product and welcome any feedback or comments you may have.
The John Lewis Team
No tools required
Time to assemble
40 Minutes
People to assemble

Important safety information
Warnings
The product should only be used on firm, level ground.
Keepsmall parts out of reach of children.
Ensure the product is fully assembled as illustrated before use.
Do’s
Check the pack and make sure you have all the parts listed.
Check all screws or bolts are tightened and inspect regularly.
Make sure the legs remain in contact with the ground at all times.
Don’ts
Do not over tighten screws or bolts.
Do not stand on the product.
Do not use power tools to construct as overtightening and panel failure may occur.
2
01244 689949

Your bed
3
1 2 3
4 5 6
7
Ref Description Qty
1
2
Headboard
Footboard
1
1
4Slats 28
3Side rails 2
5
6
Cross bars
Support legs
2
3
7Centre rail 1

4
Fixtures and fittings
Fixtures and fittings
supplied (actual size)
Ref Description Dimensions Qty
JCBC bolt M6 x 25mm 12
JCBC bolt M6 x 30mm 5
B
A
Fixtures and fittings
supplied (not actual size)
Ref Description Qty
Washer 8
Centre cap 14
Adjuster 3
M6 JCN nut 6
C
D
E
F
Side cap 28
G
M4 Allen key 2
H

5
Product assembly
Alpha bed
803 50402
803 50201
803 50404
803 50202
Step 1
Parts, fittings and tools
Repeat this for all 4 corners.
Step 2
Parts, fittings and tools
3 A5 HD
1 32
1
3
2
3
CA H
C
A
H
A
H
D
H
5
3
5

6
Alpha bed
803 50402
803 50201
803 50404
803 50202
Step 3
Parts, fittings and tools
Step 4
Parts, fittings and tools
6 EC H
7 DC H
D
C
H
H
7
7
6
C
H
6
EE
Note: Once the Supporting
Legs are secured in place,
unscrew the Adjuster slightly,
ensuring there is a 5mm gap
between the Adjuster and
hard point of the floor.
E

Alpha bed
803 50402
803 50201
803 50404
803 50202
Step 5
Parts, fittings and tools
4 GF
4
G
F
7
Step 6
Ready to use

John Lewis Partnership
171 Victoria Street
London SW1E 5NN
johnlewis.com
Care guide
Care and maintenance
Metal furniture
This bed should be cleaned using a soft damp cloth and dried immediately. Do not use a very wet cloth or allow
any liquid contact for a long period of time as this can permanently damage the surface.
Do not use abrasive cleaner or harsh detergents as this can damage the surface.
Do not drag any object across the bed as this can cause permanent damage.
Safety instructions
Never drag furniture when moving it. Always lift it.
Periodically check all fixings to ensure none have come loose and retighten when necessary.
Please take care when handling or moving the furniture as careless handling may cause damage or injury.
Furniture can be dangerous if incorrectly installed. Assembly should be carried out by a competent person. No
liability will be accepted for damage or injury caused by incorrectly installed or assembled furniture.
During assembly children should be kept away from the product due to possible risk of injury.
Do not use this item if any components are missing or damaged.
It is recommended that before moving heavy objects to a new location they are completely dis-assembled to
avoid personal injury or damage to the furniture. Please be careful to retain all fittings when doing this.
This product complies with BS EN 1725:1998.
If you require any additional information or have any issues with this product please call the John Lewis helpline
on 03456 049 049.
If you require spare parts or further technical assistance please call 01244 689949 or email [e-mail].
Retain these instructions for future reference.