John Lewis Mixit User manual

Please check the pack contents before attempting to assemble this product. A full checklist of compo-
nents is given in this leaflet. If any components are missing, please contact the John Lewis Helpline.
TAKE CARE WHEN LIFTING to avoid personal injury and (or) damage to the product.
his product takes approximately 45 MINUTES to assemble.
he fittings pack contains SMALL ITEMS which should be KEPT AWAY FROM YOUNG CHILDREN.
Read this leaflet in full before commencing assembly.
If you are missing some fittings please contact our spare parts helpline on 0330 005 9435.
Opening hours are 9am - 5pm Monday to Friday.
John Lewis
Stock Code: 80323104
Mixit internal rawers ouble L.100
hank you for purchasing this Mixit internal drawers. Please read the instructions carefully before use to
ensure safe and satisfactory operation of this product.
PRE-ASSEMBLY PREPARATION
Please ensure instructions are read in full before attempting to assemble this product.
Necessary Tools
Screwdriver Hammer
Eye protection
MXT 06 rev. 03 - 30/03/16
Page 1

Metal dowel x 8 Short cam lock x 8 Wooden dowel x 8
30mm
40mm screw x 12 30mm Screw x 8 WFixing block x 4
Threaded bush x 8 11mm Euroscrew x 12 15mm Screw x 16
Pair of rollers 2
A B C
G H
D E F
I
Z2
Z1
Page 2
MXT 06 rev. 03 - 30/03/16
Fittings checklist

1
1
2
2
3
3
4
4
5
5
6
6
6
6
Page 3
MXT 06 rev. 03 - 30/03/16
Pa ts checklist

G
G
1
2
3
4
7
8
Page 4
Step by step assembly inst uctions
Step One
Insert 8x threaded bush (G) into the ho es on side pane s as shown, with the he p af a hammer. 1.
MXT 06 rev. 03 - 30/03/16

1
2
3
4
7
8
6
6
D
D
Page 5
MXT 06 rev. 03 - 30/03/16
Step by step assembly inst uctions
Step Two
Fix 4x spacers (6) to side pane s through ho es shown in the view using 12x screws (D).1.

Front side
HHH
HHH
Z1
Z1
Z1
Z1
I
H
I
H
6
Page 6
Step by step assembly inst uctions
Step Three
Fix 4x runner parts (Z1) to the spacers (6) through ho es shown in the detai view using
12x euroscrews (H) and 4x screws (I).
1.
MXT 06 rev. 03 - 30/03/16

B
A
B
B
2x 2
5x 2
C
3x 2
C
3
2
4
E
E
Page 7
Step by step assembly inst uctions
Step Four
Attach 4x wooden dowe s (C) into the pre-dri ed ho es on drawer sides (2) (3) as shown,
repeat for a drawers.
P ace the cam ock (B) into the ho es on drawer sides (2) (3) as shown, arrow pointing towards the bo t,
repeat for a drawers.
Attach 4x meta dowe s (A) into the pre-dri ed ho es on drawer front (5). Use a screwdriver to
turn fitting (A) c ockwise to fix, repeat for a drawers.
1.
2.
3.
MXT 06 rev. 03 - 30/03/16
Step Five
Fit the RH (2) and LH (3) drawer sides to the drawer back (4) using 30 mm screws (E),
repeat for a drawers.
1.

1
2
B
1
B
A
5
I
I
I
I
I
I
Z2
Z2
F
F
F
Page 8
MXT 06 rev. 03 - 30/03/16
Step by step assembly inst uctions
Step Six
S ide drawer bottom pane (1) into the drawer box grooves.
Position drawer front (5) onto drawer box, turn ocking nuts (B) c ockwise to ock.
repeat for a drawers
1.
2.
Step Seven
Fix 2x runner part (Z2) onto the drawer using 6x screws (I)
repeat for a drawers.
Position 2x fixing b ocks (F) into the groove of the
drawer back, drawer front and screw to fix.
repeat for a drawers.
1.
2.

Page 9
MXT 06 rev. 03 - 30/03/16
Recommended loading
capacity for drawer: 10 Kgs
Step by step assembly inst uctions
Step Eight
Ti t the drawer as shown.
S ide the drawer box a ong the runner parts unti the stop.
Whee s and runner parts have to be correct y matched as shown.
1.
2.

Safety Inst uctions
Page 10
Ca e and Maintenance
MXT 06 rev. 03 - 30/03/16
his product has been manufactured using modern manufacturing methods and materials.
o keep your product, looking at its best, we strongly recommend either dusting with a soft cloth, or
the use of a damp (not wet ) cloth and water containing no more than a 5% soap solution.
Dry with a soft clean cloth.
Aggressive chemicals, such as wax furniture polish, abrasive cleaners, bleach or hypochlorate (chlorine)
based cleaners, multi purpose cleaners, dilutes, acetone, alcohol and solvent based liquid product should
NO be used, as may result in damage.
Never drag furniture when moving it, always lift it.
Periodically check all fixings to ensure none have come loose and re-tighten when necessary.
Please take care when handling or moving the furniture as careless handling may cause damage or injury.
Furniture can be dangerous if incorrectly installed. Assembly should be carried out by a competent person. No
liability will be accepted for damage or injury caused by incorrectly installed or assembled furniture.
It is recommended that before moving a heavy object to a new location it is completely dis-assembled to avoid
personal injury or damage to the furniture. Please be careful to retain all fittings when doing this.
PLEASE KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE
John Lewis Partnership 171 Victoria Street London SWIE 5NN
www.johnlewis.com