John Lewis Lansbury Antique Brass Bed User manual

John Lewis
Lansbury Antique Brass Bed
Stock number: 80347201/80347202
Thank you for urchasing this roduct. Please read the instructions carefully before use to ensure safe
and satisfactory o eration of this roduct
Pre-assembly preparation
Please ensure instructions are read in full before attem ting to assemble this roduct
Necessary Tools
Please check the ack contents before attem ting to assemble this roduct. A full checklist of
com onents is given in this leaflet. If any com onents are missing, lease contact the retailer from whom
you bought this roduct.
This roduct is HEAVY, it should be assembled as near as ossible to the oint of use. TAKE CA E
WHEN LIFTING to avoid ersonal injury and (or) damage to the roduct. (Include if relevant)
This roduct takes a roximately 60 MINUTES to assemble with 2 PE SON.
The fittings ack contains SMALL ITEMS which should be KEPT AWAY F OM YOUNG
CHILD EN .
Read this leaflet in full before commencing assembly.
1

Fittings and parts checklist
A M6 x 20mm x 12pcs
(1)
Headboard x 1pcs
B M6 x 55mm x 4pcs
(2) Footboard x 1pcs
C M6 Nut x 2pcs (3) Side Rail x 2pcs
D Plastic Washer x 8pcs
(4) Cross Bar x 2pcs
E Metal Washer x 18pcs (5) Center Rail x 1pcs
F 4mm Allen key x 1pcs
(6)
SprungSlats xD30/K32pcs
G 11mm Spanner x 1pcs (7) Plastic capxD30/K32pcs
(8)
Plastic capxD15/K16pcs
(9) Fabric x2pcs
(10) Supporting x 2pcs
(11) Finials x 4pcs
2

Step by step assembly instructions
Step One
1. Attach siderails 3 (x2) to headboard 1 and footboard 2 using 8 x bolts (A), 8 x
plastic washers (D) and 8 x metal washers (E), Tighten using Allen key (F).
Step Two
1. Attach cross bars 4 (x2) to the brackets on siderails 3 (x2) using 4 x bolts (A) and
4 x metal washers(E), Tighten with Allen key (F).
3

Step Three
1. 1. Attach centre rail 5 between the brackets on crossbars 4 (x2) using 2 x bolts
(B), 4 x metal washers (E) and 2 x nuts (C). Tighten with Allen key (F) and spanner
(G).
Step Four
1. Attach 2x support leg (10) to centre rail (5) using 2 x bolt(B), 2x metal washer
(E) and tighten with Allen key(F).
4

Step Five
1.Insert a sprung wooden slat 6 through the first hole in strap 9. Repeat using
another sprung wooden slat 6 and the other strap 9.
2.Attach single sided slat cap 7 onto one end of the sprung wooden slat 6. Attach
another single sided slat cap 7 onto the other end of the second sprung wooden
slat 6.
3.Attach both sprung wooden slats to the assembled bed base by inserting each
single sided slat cap 7 into side rails 3 (x2) and using double sided slat cap 8 in the
centre. Once each slat has been inserted into the slat caps, ensure the double
sided slat cap is firmly pushed into the holes in centre rail 5.
4.Repeat process for all remaining slats and caps until all components have been
used and firmly pushed in place.
5

Step Six
1. Attach finials 11 to headboard 1 and footboard 2 turning clockwise by hand to
tighten.
Care and Maintenance
For general cleaning, eriodically dust with a soft cloth.
Do not rub or scrub the surface when cleaning.
Do not use abrasive cleaning products or those containing silicone.
Any spills should be removed immediately with a soft clean damp cloth and dried immediately.
Do not put hot dishes directly on the surfaces of the item.
General warnings:
Never drag furniture when moving it, always lift it.
Periodically check all fixings to ensure none have come loose and re-tighten where necessary.
Please take care when handling or moving the furniture as careless handling may cause damage or injury.
Furniture can be dangerous if incorrectly installed. Assembly should be carried out by a com etent erson. No
liability will be acce ted for damage or injury caused by incorrectly insalled or assembled furniture.
Specific warnings for heavy items:
It is recommended that before moving heavy objects to a new location they are com letely dis-assembled to avoid
ersonal injury or damage to the furniture. Please be careful to retain all fittings when doing this
PLEASE KEEP THESE INST UCTIONS FO FUTU E EFE ENCE
John Lewis Partnershi 171 Victoria Street London SW1E 5NN
www.johnlewis.com
6